Design of a 3D-printed liquid lithium divertor target plate and its interaction with high-density plasma

A liquid Li divertor is a promising alternative for future fusion devices.In this work a new divertor model is proposed,which is processed by 3D-printing technology to accurately control the size of the internal capillary structure.At a steady-state heat load of 10 MW m^(-2),the thermal stress of the tungsten target is within the bearing range of tungsten by finite-element simulation.In order to evaluate the wicking ability of the capillary structure,the wicking process at 600℃ was simulated by FLUENT.The result was identical to that of the corresponding experiments.Within 1 s,liquid lithium was wicked to the target surface by the capillary structure of the target and quickly spread on the target surface.During the wicking process,the average wicking mass rate of lithium should reach 0.062 g s^(-1),which could even supplement the evaporation requirement of liquid lithium under an environment>950℃.Irradiation experiments under different plasma discharge currents were carried out in a linear plasma device(SCU-PSI),and the evolution of the vapor cloud during plasma irradiation was analyzed.It was found that the target temperature tends to plateau despite the gradually increased input current,indicating that the vapor shielding effect is gradually enhanced.The irradiation experiment also confirmed that the 3D-printed tungsten structure has better heat consumption performance than a tungsten mesh structure or multichannel structure.These results reveal the application potential and feasibility of a 3D-printed porous capillary structure in plasma-facing components and provide a reference for further liquid-solid combined target designs.

3D-Printed MOF Monoliths:Fabrication Strategies and Environmental Applications

Metal-organic frameworks(MOFs)have been extensively considered as one of the most promising types of porous and crystalline organic-inorganic materials,thanks to their large specific surface area,high porosity,tailorable structures and compositions,diverse functionalities,and well-controlled pore/size distribution.However,most developed MOFs are in powder forms,which still have some technical challenges,including abrasion,dustiness,low packing densities,clogging,mass/heat transfer limitation,environmental pollution,and mechanical instability during the packing process,that restrict their applicability in industrial applications.Therefore,in recent years,attention has focused on techniques to convert MOF powders into macroscopic materials like beads,membranes,monoliths,gel/sponges,and nanofibers to overcome these challenges.Three-dimensional(3D)printing technology has achieved much interest because it can produce many high-resolution macroscopic frameworks with complex shapes and geometries from digital models.Therefore,this review summarizes the combination of different 3D printing strategies with MOFs and MOF-based materials for fabricating 3D-printed MOF monoliths and their environmental applications,emphasizing water treatment and gas adsorption/separation applications.Herein,the various strategies for the fabrication of 3D-printed MOF monoliths,such as direct ink writing,seed-assisted in-situ growth,coordination replication from solid precursors,matrix incorporation,selective laser sintering,and digital light processing,are described with the relevant examples.Finally,future directions and challenges of 3D-printed MOF monoliths are also presented to better plan future trajectories in the shaping of MOF materials with improved control over the structure,composition,and textural properties of 3D-printed MOF monoliths.

Challenges and Opportunities in Preserving Key Structural Features of 3D-Printed Metal/Covalent Organic Framework

Metal-organic framework(MOF)and covalent organic framework(COF)are a huge group of advanced porous materials exhibiting attractive and tunable microstructural features,such as large surface area,tunable pore size,and functional surfaces,which have significant values in various application areas.The emerging 3D printing technology further provides MOF and COFs(M/COFs)with higher designability of their macrostructure and demonstrates large achievements in their performance by shaping them into advanced 3D monoliths.However,the currently available 3D printing M/COFs strategy faces a major challenge of severe destruction of M/COFs’microstructural features,both during and after 3D printing.It is envisioned that preserving the microstructure of M/COFs in the 3D-printed monolith will bring a great improvement to the related applications.In this overview,the 3D-printed M/COFs are categorized into M/COF-mixed monoliths and M/COF-covered monoliths.Their differences in the properties,applications,and current research states are discussed.The up-to-date advancements in paste/scaffold composition and printing/covering methods to preserve the superior M/COF microstructure during 3D printing are further discussed for the two types of 3D-printed M/COF.Throughout the analysis of the current states of 3D-printed M/COFs,the expected future research direction to achieve a highly preserved microstructure in the 3D monolith is proposed.

Development and characterization of 3D-printed electroconductive pHEMA-co-MAA NP-laden hydrogels for tissue engineering

Tissue engineering(TE)continues to be widely explored as a potential solution to meet critical clinical needs for diseased tissue replacement and tissue regeneration.In this study,we developed a poly(2-hydroxyethyl methacrylate-co-methacrylic acid)(pHEMA-co-MAA)based hydrogel loaded with newly synthesized conductive poly(3,4-ethylene-dioxythiophene)(PEDOT)and polypyrrole(PPy)nanoparticles(NPs),and subsequently processed these hydrogels into tissue engineered constructs via three-dimensional(3D)printing.The presence of the NPs was critical as they altered the rheological properties during printing.However,all samples exhibited suitable shear thinning properties,allowing for the development of an optimized processing window for 3D printing.Samples were 3D printed into pre-determined disk-shaped configurations of 2 and 10 mm in height and diameter,respectively.We observed that the NPs disrupted the gel crosslinking efficiencies,leading to shorter degradation times and compressive mechanical properties ranging between 450 and 550 kPa.The conductivity of the printed hydrogels increased along with the NP concentration to(5.10±0.37)×10^(−7)S/cm.In vitro studies with cortical astrocyte cell cultures demonstrated that exposure to the pHEMA-co-MAA NP hydrogels yielded high cellular viability and proliferation rates.Finally,hydrogel antimicrobial studies with staphylococcus epidermidis bacteria revealed that the developed hydrogels affected bacterial growth.Taken together,these materials show promise for various TE strategies.

Temporal and spatial regulation of biomimetic vascularization in 3D-printed skeletal muscles

In the intricate skeletal muscle tissue,the symbiotic relationship between myotubes and their supporting vasculature is pivotal in delivering essential oxygen and nutrients.This study explored the complex interplay between skeletal muscle and endothelial cells in the vascularization ofmuscle tissue.By harnessing the capabilities of three-dimensional(3D)bioprinting and modeling,we developed a novel approach involving the co-construction of endothelial and muscle cells,followed by their subsequent differentiation.Our findings highlight the importance of the interaction dynamics between these two cell types.Notably,introducing endothelial cells during the advanced phases of muscle differentiation enhanced myotube assembly.Moreover,it stimulated the development of the vascular network,paving the way for the early stages of vascularized skeletal muscle development.The methodology proposed in this study indicates the potential for constructing large-scale,physiologically aligned skeletal muscle.Additionally,it highlights the need for exploring the delicate equilibrium and mutual interactions between muscle and endothelial cells.Based on the multicell-type interaction model,we can predict promising pathways for constructing even more intricate tissues or organs.

3D-printed Mg-1Ca/polycaprolactone composite scaffolds with promoted bone regeneration

In bone tissue engineering,polycaprolactone(PCL)is a promising material with good biocompatibility,but its poor degradation rate,mechanical strength,and osteogenic properties limit its application.In this study,we developed an Mg-1Ca/polycaprolactone(Mg-1Ca/PCL)composite scaffolds to overcome these limitations.We used a melt blending method to prepare Mg-1Ca/PCL composites with Mg-1Ca alloy powder mass ratios of 5,10,and 20 wt%.Porous scaffolds with controlled macro-and microstructure were printed using the fused deposition modeling method.We explored the mechanical strength,biocompatibility,osteogenesis performance,and molecular mechanism of the Mg-1Ca/PCL composites.The 5 and 10 wt%Mg-1Ca/PCL composites were found to have good biocompatibility.Moreover,they promoted the mechanical strength,proliferation,adhesion,and osteogenic differentiation of human bone marrow stem cells(hBMSCs)of pure PCL.In vitro degradation experiments revealed that the composite material stably released Mg_(2)+ions for a long period;it formed an apatite layer on the surface of the scaffold that facilitated cell adhesion and growth.Microcomputed tomography and histological analysis showed that both 5 and 10 wt%Mg-1Ca/PCL composite scaffolds promoted bone regeneration bone defects.Our results indicated that the Wnt/β-catenin pathway was involved in the osteogenic effect.Therefore,Mg-1Ca/PCL composite scaffolds are expected to be a promising bone regeneration material for clinical application.Statement of significance:Bone tissue engineering scaffolds have promising applications in the regeneration of critical-sized bone defects.However,there remain many limitations in the materials and manufacturing methods used to fabricate scaffolds.This study shows that the developed Ma-1Ca/PCL composites provides scaffolds with suitable degradation rates and enhanced boneformation capabilities.Furthermore,the fused deposition modeling method allows precise control of the macroscopic morphology and microscopic porosity of the scaffold.The obtained porous scaffolds can significantly promote the regeneration of bone defects.

Constructing a biofunctionalized 3D-printed gelatin/sodium alginate/chitosan tri-polymer complex scaffold with improvised biological andmechanical properties for bone-tissue engineering

Sodium alginate(SA)/chitosan(CH)polyelectrolyte scaffold is a suitable substrate for tissue-engineering application.The present study deals with further improvement in the tensile strength and biological properties of this type of scaffold to make it a potential template for bone-tissue regeneration.We experimented with adding 0%–15%(volume fraction)gelatin(GE),a protein-based biopolymer known to promote cell adhesion,proliferation,and differentiation.The resulting tri-polymer complex was used as bioink to fabricate SA/CH/GEmatrices by three-dimensional(3D)printing.Morphological studies using scanning electron microscopy revealed the microfibrous porous architecture of all the structures,which had a pore size range of 383–419μm.X-ray diffraction and Fourier-transform infrared spectroscopy analyses revealed the amorphous nature of the scaffold and the strong electrostatic interactions among the functional groups of the polymers,thereby forming polyelectrolyte complexes which were found to improve mechanical properties and structural stability.The scaffolds exhibited a desirable degradation rate,controlled swelling,and hydrophilic characteristics which are favorable for bone-tissue engineering.The tensile strength improved from(386±15)to(693±15)kPa due to the increased stiffness of SA/CH scaffolds upon addition of gelatin.The enhanced protein adsorption and in vitro bioactivity(forming an apatite layer)confirmed the ability of the SA/CH/GE scaffold to offer higher cellular adhesion and a bone-like environment to cells during the process of tissue regeneration.In vitro biological evaluation including the MTT assay,confocal microscopy analysis,and alizarin red S assay showed a significant increase in cell attachment,cell viability,and cell proliferation,which further improved biomineralization over the scaffold surface.In addition,SA/CH containing 15%gelatin designated as SA/CH/GE15 showed superior performance to the other fabricated 3D structures,demonstrating its potential for use in bone-tissue engineering.

Transfer film effects induced by 3D-printed polyether-ether-ketone with excellent tribological properties for joint prosthesis

Based on the building principle of additive manufacturing,printing orientation mainly determines the tribological properties of joint prostheses.In this study,we created a polyether-ether-ketone(PEEK)joint prosthesis using fused filament fabrication and investigated the effects of printing orientation on its tribological properties using a pin-on-plate tribometer in 25% newborn calf serum.An ultrahigh molecular weight polyethylene transfer film is formed on the surface of PEEK due to the mechanical capture of wear debris by the 3D-printed groove morphology,which is significantly impacted by the printing orientation of PEEK.When the printing orientation was parallel to the sliding direction of friction,the number and size of the transfer film increased due to higher steady stress.This transfer film protected the matrix and reduced the friction coefficient and wear rate of friction pairs by 39.13%and 74.33%,respectively.Furthermore,our findings provide a novel perspective regarding the role of printing orientation in designing knee prostheses,facilitating its practical applications.

Path-Dependent Progressive Failure Analysis for 3D-Printed Continuous Carbon Fibre Reinforced Composites

In order to predict the damage behaviours of 3D-printed continuous carbon fibre(CCF)reinforced composites,when additional short carbon fibre(SCF)composite components are employed for continuous printing or special functionality,a novel path-dependent progressive failure(PDPF)numerical approach is developed.First,a progressive failure model using Hashin failure criteria with continuum damage mechanics to account for the damage initiation and evaluation of 3D-printed CCF reinforced polyamide(PA)composites is developed,based on actual fibre placement trajectories with physical measurements of 3D-printed CCF/PA constituents.Meanwhile,an elastic-plastic model is employed to predict the plastic damage behaviours of SCF/PA parts.Then,the accuracy of the PDPF model was validated so as to study 3D-printed CCF/PA composites with either negative Poisson's ratio or high stiffness.The results demonstrate that the proposed PDPF model can achieve higher prediction accuracies in mechanical properties of these 3D-printed CCF/PA composites.Mechanism analyses show that the stress distribution is generally aggregated in the CCF areas along the fibre placement paths,and the shear damage and matrix tensile/compressive damage are the key damage modes.This study provides a new approach with valuable information for characterising complex 3D-printed continuous fibre-matrix composites with variable mechanical properties and multiple constituents.

Advanced strategies for 3D-printed neural scaffolds:materials,structure,and nerve remodeling

Nerve regeneration holds significant potential in the treatment of various skeletal and neurological disorders to restore lost sensory and motor functions.The potential of nerve regeneration in ameliorating neurological diseases and injuries is critical to human health.Three-dimensional(3D)printing offers versatility and precision in the fabrication of neural scaffolds.Complex neural structures such as neural tubes and scaffolds can be fabricated via 3Dprinting.This reviewcomprehensively analyzes the current state of 3D-printed neural scaffolds and explores strategies to enhance their design.It highlights therapeutic strategies and structural design involving neural materials and stem cells.First,nerve regeneration materials and their fabrication techniques are outlined.The applications of conductive materials in neural scaffolds are reviewed,and their potential to facilitate neural signal transmission and regeneration is highlighted.Second,the progress in 3D-printed neural scaffolds applied to the peripheral and central nerves is comprehensively evaluated,and their potential to restore neural function and promote the recovery of different nervous systems is emphasized.In addition,various applications of 3D-printed neural scaffolds in peripheral and neurological diseases,as well as the design strategies of multifunctional biomimetic scaffolds,are discussed.

Application of Personalized 3D-Printed Rehabilitation Orthotics in Postoperative Recovery of Jaw Fractures

Objective:To analyze the effectiveness of personalized 3D-printed rehabilitation orthotics in the postoperative recovery of jaw fractures.Methods:Relevant data were collected from 42 patients with jaw fractures treated at our hospital between October 2017 and May 2020.Patients were randomly divided into a traditional group(n=17)and a modified group(n=25).The traditional group received standard rehabilitation methods,while the modified group used personalized 3D-printed rehabilitation orthotics combined with improved rehabilitation methods.The temporomandibular disability index(TDI),quality of life scores,postoperative recovery excellence rate,and mouth opening were compared between the two groups at different follow-up times(before rehabilitation,and at 1 week,3 months,and 6 months post-surgery).Results:At 1 week,3 months,and 6 months post-surgery,the TDI in both the traditional and modified groups was significantly lower than before rehabilitation,with statistically significant differences(P<0.05).At 3 and 6 months post-surgery,the TDI in the modified group was lower than in the traditional group,with statistically significant differences(P<0.05).At 3 and 6 months post-surgery,pain,appearance,activity,recreation,work,chewing,swallowing,speech,shoulder function,and total quality of life scores in both groups were higher than before rehabilitation,with the modified group showing significantly higher scores in pain,appearance,chewing,swallowing,and total quality of life(P<0.05).Compared to before rehabilitation,mouth opening significantly improved in both groups at 3 and 6 months post-surgery,with the modified group showing significantly greater improvement(P<0.05).Conclusion:Personalized 3D-printed rehabilitation orthotics are highly effective in the postoperative recovery of jaw fractures.They can improve patients’quality of life after surgery,enhance the excellent rate of postoperative recovery,and increase mouth opening.

3D-printable Boron Nitride/Polyacrylic Hydrogel Composites with High Thermal Conductivities

Polyacrylic acid(PAA)hydrogel composites with different hexagonal boron nitride(h-BN)fillers were synthesized and successfully 3D-printed while their thermal conductivity was systematically studied.With the content of h-BN increasing from 0.1 wt%to 0.3 wt%,the thermal conductivity of the 3D-printed composites has been improved.Moreover,through the shear force given by the 3D printer,a complete thermal conductivity path is obtained inside the hydrogel,which significantly improves the thermal conductivity of the h-BN hydrogel composites.The maximum thermal conductivity is 0.8808 W/(m·K),leading to a thermal conductive enhancement of 1000%,compared with the thermal conductivity of pure PAA hydrogels.This study shows that using h-BN fillers can effectively and significantly improve the thermal conductivity of hydrogelbased materials while its 3D-printable ability has been maintained.

Embedding aligned nanofibrous architectures within 3D-printed polycaprolactone scaffolds for directed cellular infiltration and tissue regeneration

Three-dimensional(3D) printing provides a promising way to fabricate biodegradable scaffolds with designer architectures for the regeneration of various tissues.However,the existing3D-printed scaffolds commonly suffer from weak cell-scaffold interactions and insufficient cell organizations due to the limited resolution of the 3D-printed features.Here,composite scaffolds with mechanically-robust frameworks and aligned nanofibrous architectures are presented and hybrid manufactured by combining techniques of 3D printing,electrospinning,and unidirectional freeze-casting.It was found that the composite scaffolds provided volume-stable environments and enabled directed cellular infiltration for tissue regeneration.In particular,the nanofibrous architectures with aligned micropores served as artificial extracellular matrix materials and improved the attachment,proliferation,and infiltration of cells.The proposed scaffolds can also support the adipogenic maturation of adipose-derived stem cells(ADSCs)in vitro.Moreover,the composite scaffolds were found to guide directed tissue infiltration and promote nearby neovascularization when implanted into a subcutaneous model of rats,and the addition of ADSCs further enhanced their adipogenic potential.The presented hybrid manufacturing strategy might provide a promising way to produce additional topological cues within 3D-printed scaffolds for better tissue regeneration.

Novel structural designs of 3D-printed osteogenic graft for rapid angiogenesis

Large bone defect regeneration has always been recognized as a challenging clinical problem due to the difficulty of revascularization.Conventional treatments exhibit certain inherent disadvantages(e.g.,secondary injury,immunization,and potential infections).However,three-dimensional(3D)printing technology as an emerging field can serve as an effective approach to achieve satisfactory revascularization while making up for the above limitations.A wide variety of methods can be used to facilitate blood supply during the design of a 3D-printed scaffold.Importantly,the scaffold structure lays a foundation for the entire printing object;any method to promote angiogenesis can be effective only if it is based on well-designed scaffolds.In this review,different designs related to angiogenesis are summarized by collecting the literature from recent years.The 3D-printed scaffolds are classified into four major categories and discussed in detail,from elementary porous scaffolds to the most advanced bone-like scaffolds.Finally,structural design suggestions to achieve rapid angiogenesis are proposed by analyzing the above architectures.This review can provide a reference for organizations or individual academics to achieve improved bone defect repair and regeneration using 3D printing.

Effect of layer thickness on the flexural property and microstructure of 3D-printed rhomboid polymer-reinforced cemented tailing composites

For mines with poor ore bodies and surrounding rocks,the general mining method does not allow the ore to be extracted from underground safely and efficiently.For these mines,the downward layered filling mining technique is undoubtedly the most suitable mining method.The downward filling mining technique may eliminate the troubles relating to poor ore deposit conditions,such as production safety,ore loss rate,and depletion rate.However,in this technique,the safety of the artificial roof of the next stratum is of paramount importance.Cementitious tailings backfilling(CTB)that is not sufficiently cemented and causes collapses could threaten ore production.This paper explores a diamond-shaped composite structure to mimic the stability of a glued false roof in an actual infill mine based on the recently emerged three-dimensional(3D)printing technology.Experimental means such as three-point bending and digital image correlation(DIC)techniques were used to explore the flexural characteristics of 3D construction specimens and CTB combinations with different cement/tailings weight ratios at diverse layer heights.The results show that the 3D structure with a 14-mm ply height and CTB has strong flexural characteristics,with a maximum deflection value of 30.1 mm,while the 3D-printed rhomboid polymer(3D-PRP)structure with a 26-mm ply height is slightly worse in terms of flexural strength characteristics,but it has a higher maximum flexural strength of 2.83 MPa.A combination of 3D structure and CTB has more unique mechanical properties than CTB itself.This research work offers practical knowledge on the artificial roof performance of the downward layered filling mining technique and builds a scientific knowledge base regarding the successful application of CTB material in mines.

Low-temperature 3D-printed collagen/chitosan scaffolds loaded with exosomes derived from neural stem cells pretreated with insulin growth factor-1 enhance neural regeneration after traumatic brain injury

There are various clinical treatments for traumatic brain injury,including surgery,drug therapy,and rehabilitation therapy;howeve r,the therapeutic effects are limited.Scaffolds combined with exosomes represent a promising but challenging method for improving the repair of traumatic brain injury.In this study,we determined the ability of a novel 3D-printed collagen/chitosan scaffold loaded with exosomes derived from neural stem cells pretreated with insulin-like growth factor-1(3D-CC-INEXOS) to improve traumatic brain injury repair and functional recove ry after traumatic brain injury in rats.Composite scaffolds comprising collagen,chitosan,and exosomes derived from neural stem cells pretreated with insulin-like growth fa ctor-1(INEXOS) continuously released exosomes for 2weeks.Transplantation of 3D-CC-INExos scaffolds significantly improved motor and cognitive functions in a rat traumatic brain injury model,as assessed by the Morris water maze test and modified neurological seve rity scores.In addition,immunofluorescence staining and transmission electron microscopy showed that3D-CC-INExos implantation significantly improved the recove ry of damaged nerve tissue in the injured area.In conclusion,this study suggests that transplanted3D-CC-INExos scaffolds might provide a potential strategy for the treatment of traumatic brain injury and lay a solid foundation for clinical translation.

3D-printed engineered bacteria-laden gelatin/sodium alginate composite hydrogels for biological detection of ionizing radiation

Nuclear safety is a global growing concern,where ionizing radiation(IR)is a major injury factor resulting in serious damage to organisms.The detection of IR is usually conducted with physical dosimeters;however,biological IR detection methods are deficient.Here,a living composite hydrogel consisting of engineered bacteria and gelatin/sodium alginate was 3D-printed for the biological detection of IR.Three strains of PrecA::egfp gene circuit-containing engineered Escherichia coli were constructed with IR-dependent fluorescence,and the DH5αstrain was finally selected due to its highest radiation response and fluorescence.Engineered bacteria were loaded in a series of gelatin/sodium alginate matrix hydrogels with different rheology,3D printability and bacterial applicability.A high-gelatin-content hydrogel containing 10%gelatin/1.25%sodium alginatewas optimal.The optimal living composite hydrogelwas 3D-printedwith the special bioink,which reported significant green fluorescence underγ-ray radiation.The living composite hydrogel provides a biological strategy for the detection of environmental ionizing radiation.

Comparative study in vivo of the osseointegration of 3D-printed and plasma-coated titanium implants

BACKGROUND Total hip arthroplasty is a common surgical treatment for elderly patients with osteoporosis,particularly in postmenopausal women.In such cases,highly porous acetabular components are a favorable option in achieving osseointegration.However,further discussion is needed if use of such acetabular components is justified under the condition of normal bone mass.AIM To determine the features of osseointegration of two different types of titanium implants[3-dimensional(3D)-printed and plasma-coated titanium implants]in bone tissue of a distal metaphysis in a rat femur model.METHODS This study was performed on 20 white male laboratory rats weighing 300-350 g aged 6 mo.Rats were divided into two groups of 10 animals,which had two different types of implants were inserted into a hole defect(2×3 mm)in the distal metaphysis of the femur:GroupⅠ:3D-printed titanium implant(highly porous);GroupⅡ:Plasma-coated titanium implant.After 45 and 90 d following surgery,the rats were sacrificed,and their implanted femurs were extracted for histological examination.The relative perimeter(%)of bone trabeculae[bone-implant contact(BIC%)]and bone marrow surrounding the titanium implants was measured.RESULTS Trabecular bone tissue was formed on the 45th day after implantation around the implants regardless of their type.45 d after surgery,group I(3D-printed titanium implant)and groupⅡ(plasma-coated titanium implant)did not differ in BIC%(83.51±8.5 vs 84.12±1.73;P=0.838).After 90 d,the BIC%was higher in group I(87.04±6.99 vs 81.24±7.62;P=0.049),compared to groupⅡ.The relative perimeter of the bone marrow after 45 d did not differ between groups and was 16.49%±8.58%for groupⅠ,and 15.88%±1.73%for groupⅡ.Futhermore,after 90 d,in groupⅠthe relative perimeter of bone marrow was 1.4 times smaller(12.96±6.99 vs 18.76±7.62;P=0.049)compared to the relative perimeter of bone marrow in groupⅡ.CONCLUSION The use of a highly porous titanium implant,manufactured with 3D printing,for acetabular components provides increased osseointegration compared to a plasma-coated titanium implant.

沈阳市O_(3)与PM_(2.5)关系及污染主控因素分析

PM_(2.5)与O_(3)的协同控制是空气质量持续改善的关键所在,厘清PM_(2.5)与O_(3)的关系,识别O_(3)主控因素以及量化气象和人为排放贡献是实施二者协同控制的基础.本研究基于沈阳市大气复合立体超级站2019−2022年地面观测数据,分析PM_(2.5)和O_(3)协同关系及成因;利用逐步回归模型得到影响O_(3)变化的主控因素,并估算各气象因素对O_(3)的贡献.结果表明:①沈阳市2019−2022年夏季PM_(2.5)浓度与O_(3)浓度呈正相关,有明显的协同增长效应,其余三季均呈明显负相关.究其原因,主要是由于夏季高温和高太阳辐射条件利于大气光化学反应,促进了O_(3)、PM_(2.5)中二次无机成分〔主要是硫酸盐(SO_(4)^(2−))、硝酸盐(NO_(3)−)和铵盐(NH_(4)^(+)),简称“SNA”〕共同增长所致;而冬季高排放和高大气稳定度等气象条件利于SNA和二次有机碳(SOC)非均相生成,但弱太阳辐射和低温等条件不利于O_(3)光化学生成,加之高NO的滴定效应,使SNA和SOC浓度均与O_(3)浓度呈负相关.②在观测的相关污染物和气象因子中,过氧乙酰硝酸酯(PAN)与O_(3)浓度的关系最为密切,尤其在夏季.③气象因素中,O_(3)浓度与气温高度相关,与风速也呈正相关,而与相对湿度则在各季节均呈负相关.冬、春、秋三季PM_(2.5)均对O_(3)起抑制作用,冬季尤为突出.在高浓度O_(3)污染(O_(3)浓度>160μg/m^(3))过程中,主控因素中气温和风速的抬升促进O_(3)浓度升高,而高NO2和相对湿度(RH)则有利于降低O_(3)浓度.在2019−2022年高浓度O_(3)污染过程中,气象因素对沈阳市O_(3)浓度变化的贡献高于O_(3)前体物排放的贡献,总贡献为57μg/m^(3),对污染形成起着主导作用.

CdS/In_(2)O_(3)/g-C_(3)N_(4)复合材料的制备及光催化性能研究

采用溶剂热法成功合成了一种新型的Z型CdS/In_(2)O_(3)/g-C_(3)N_(4)三元复合光催化材料。通过XRD、SEM、TEM、XPS和紫外-可见漫反射光谱仪对光催化材料的相结构、形貌、原子价态和光响应性能等进行表征,通过可见光降解苯酚评价其光催化活性。结果表明,具有零维结构的CdS、一维结构的In_(2)O_(3)和三维结构的g-C_(3)N_(4)形成了0D/1D/3D三元复合材料,该材料在180 min可有效降解90%的苯酚,降解速率是CdS的2.9倍、g-C_(3)N_(4)的6倍,且具有较高的稳定性。复合材料光催化能力的增强主要归因于三维多孔g-C_(3)N_(4)与CdS和In_(2)O_(3)形成的三维空间电场。三维多孔结构不仅有利于污染物的高效吸附,而且为光催化反应提供活性位点,三维空间和网络互连结构有利于光生电荷的定向迁移,增加载流子寿命。