Design of a 3D-printed liquid lithium divertor target plate and its interaction with high-density plasma

A liquid Li divertor is a promising alternative for future fusion devices.In this work a new divertor model is proposed,which is processed by 3D-printing technology to accurately control the size of the internal capillary structure.At a steady-state heat load of 10 MW m^(-2),the thermal stress of the tungsten target is within the bearing range of tungsten by finite-element simulation.In order to evaluate the wicking ability of the capillary structure,the wicking process at 600℃ was simulated by FLUENT.The result was identical to that of the corresponding experiments.Within 1 s,liquid lithium was wicked to the target surface by the capillary structure of the target and quickly spread on the target surface.During the wicking process,the average wicking mass rate of lithium should reach 0.062 g s^(-1),which could even supplement the evaporation requirement of liquid lithium under an environment>950℃.Irradiation experiments under different plasma discharge currents were carried out in a linear plasma device(SCU-PSI),and the evolution of the vapor cloud during plasma irradiation was analyzed.It was found that the target temperature tends to plateau despite the gradually increased input current,indicating that the vapor shielding effect is gradually enhanced.The irradiation experiment also confirmed that the 3D-printed tungsten structure has better heat consumption performance than a tungsten mesh structure or multichannel structure.These results reveal the application potential and feasibility of a 3D-printed porous capillary structure in plasma-facing components and provide a reference for further liquid-solid combined target designs.

3D-Printed MOF Monoliths:Fabrication Strategies and Environmental Applications

Metal-organic frameworks(MOFs)have been extensively considered as one of the most promising types of porous and crystalline organic-inorganic materials,thanks to their large specific surface area,high porosity,tailorable structures and compositions,diverse functionalities,and well-controlled pore/size distribution.However,most developed MOFs are in powder forms,which still have some technical challenges,including abrasion,dustiness,low packing densities,clogging,mass/heat transfer limitation,environmental pollution,and mechanical instability during the packing process,that restrict their applicability in industrial applications.Therefore,in recent years,attention has focused on techniques to convert MOF powders into macroscopic materials like beads,membranes,monoliths,gel/sponges,and nanofibers to overcome these challenges.Three-dimensional(3D)printing technology has achieved much interest because it can produce many high-resolution macroscopic frameworks with complex shapes and geometries from digital models.Therefore,this review summarizes the combination of different 3D printing strategies with MOFs and MOF-based materials for fabricating 3D-printed MOF monoliths and their environmental applications,emphasizing water treatment and gas adsorption/separation applications.Herein,the various strategies for the fabrication of 3D-printed MOF monoliths,such as direct ink writing,seed-assisted in-situ growth,coordination replication from solid precursors,matrix incorporation,selective laser sintering,and digital light processing,are described with the relevant examples.Finally,future directions and challenges of 3D-printed MOF monoliths are also presented to better plan future trajectories in the shaping of MOF materials with improved control over the structure,composition,and textural properties of 3D-printed MOF monoliths.

Controllable rectification on the thermal conductivity of porous YBa_(2)Cu_(3)O_(7−x) superconductors from 3D-printing

Superconducting YBa_(2)Cu_(3)O_(7−x)(YBCO)bulks have promising applications in quasi-permanent magnets,levitation,etc.Recently,a new way of fabricating porous YBCO bulks,named direct-ink-writing(DIW)3D-printing method,has been reported.In this method,the customized precursor paste and programmable shape are two main advantages.Here,we have put forward a new way to customize the YBCO 3D-printing precursor paste which is doped with Al_(2)O_(3)nanoparticles to obtain YBCO with higher thermal conductivity.The great rheological properties of precursor paste after being doped with Al_(2)O_(3)nanoparticles can help the macroscopic YBCO samples with high thermal conductivity fabricated stably with high crystalline and lightweight properties.Test results show that the peak thermal conductivity of Al_(2)O_(3)-doped YBCO can reach twice as much as pure YBCO,which makes a great effort to reduce the quench propagation speed.Based on the microstructure analysis,one can find that the thermal conductivity of Al_(2)O_(3)-doped YBCO has been determined by its components and microstructures.In addition,a macroscopic theoretical model has been proposed to assess the thermal conductivity of different microstructures,whose calculated results take good agreement with the experimental results.Meanwhile,a microstructure with high thermal conductivity has been found.Finally,a macroscopic YBCO bulk with the presented high thermal conductivity microstructure has been fabricated by the Al_(2)O_(3)-doped method.Compared with YBCO fabricated by the traditional 3D-printed,the Al_(2)O_(3)-doped structural YBCO bulks present excellent heat transfer performances.Our customized design of 3D-printing precursor pastes and novel concept of structural design for enhancing the thermal conductivity of YBCO superconducting material can be widely used in other DIW 3D-printing materials.

应用PEN3型电子鼻传感器快速检测食源性致病菌

为研究化学传感器在食源性致病菌快速检测中的应用,利用基于金属氧化物传感元件阵列的PEN3型电子鼻传感器,根据其对不同食源性致病菌产生代谢产物的差异响应。对金黄色葡萄球菌、大肠杆菌、粪链球菌、单增李斯特菌这4种常见食源性致病菌在培养2、4、6、8、10 h以及稀释103、105、107倍后进行PEN3化学传感器响应实验,建立指纹图谱。通过聚类分析、主成分分析(principal component analysis,PCA)、线性判别式分析(linear di scriminant analysis,LDA)等方法,确定化学传感器对不同培养时间、不同浓度细菌是否产生有效响应。结果表明,PCA和LDA这两种模式识别方法能够很好地将不同培养时间的细菌培养液区分开来,使组间变异和组内变异的比率达到最大,并在较低浓度条件下,4种食源性致病菌仍有较高的区分度,这表明化学传感器技术检测低浓度致病菌具有一定可行性。

基于Python的PEN3电子鼻nos文件关键信息自动提取工具设计

PEN3电子鼻原始采集数据的输出文件为nos格式文件,此文件仅限于应用厂家自带软件进行分析,分析方法有限。为了满足科研人员进行跨平台、多方法分析的需求,深入剖析nos格式文件头、体、尾特征,基于Python Tkinter模块设计PEN3电子鼻nos文件关键信息自动提取工具。应用该工具,可对原始nos格式文件中的有用信息进行快速提取和整理,并规范存储为表格文件。实际运行测试结果表明,该工具运行可靠,可满足不同采集参数nos文件的信息提取与整理要求。

基于分析型KANO模型的3D打印笔设计研究

目的针对3D打印笔市场产品同质化严重的现象,旨在充分挖掘用户需求,并依据用户需求分析的结果对3D打印笔进行改良设计。方法首先,对市场上现有的3D打印笔进行产品基本功能及使用流程的调研分析,获取初步功能需求;其次,采用共创工作坊的方式对3D打印笔的资深用户及行业内的设计开发人员展开调研,围绕用户特征、产品功能、用户痛点、产品机会点,以及创新设计等进行共创,进一步归纳整理,作为功能需求的补充;最后,根据功能需求点进行KANO问卷调研,基于分析型KANO模型计算每项功能需求的类别,通过分析型KANO模型与传统KANO模型的对比证实了分析型KANO模型的有效性,利用功能质量提升矩阵,并确定最终的设计策略。结果获得了3D打印笔各项功能需求的属性分类及设计优先级排序,提出针对3D打印笔用户需求的设计策略,完成3D打印笔设计实践与评估。结论利用共创工作坊的方法完善3D打印笔的功能需求获取,并运用分析型KANO模型对功能属性进行分类和重要性排序,将用户需求转化为设计策略,为今后企业进行同类产品设计研发提供了新的思路与方法。

Nonlinear fluid flow through three-dimensional rough fracture networks:Insights from 3D-printing,CT-scanning,and high-resolution numerical simulations

Nonlinear flow behavior of fluids through three-dimensional(3D)discrete fracture networks(DFNs)considering effects of fracture number,surface roughness and fracture aperture was experimentally and numerically investigated.Three physical models of DFNs were 3D-printed and then computed tomography(CT)-scanned to obtain the specific geometry of fractures.The validity of numerically simulating the fluid flow through DFNs was verified via comparison with flow tests on the 3D-printed models.A parametric study was then implemented to establish quantitative relations between the coefficients/parameters in Forchheimer’s law and geometrical parameters.The results showed that the 3D-printing technique can well reproduce the geometry of single fractures with less precision when preparing complex fracture networks,numerical modeling precision of which can be improved via CT-scanning as evidenced by the well fitted results between fluid flow tests and numerical simulations using CT-scanned digital models.Streamlines in DFNs become increasingly tortuous as the fracture number and roughness increase,resulting in stronger inertial effects and greater curvatures of hydraulic pressure-low rate relations,which can be well characterized by the Forchheimer’s law.The critical hydraulic gradient for the onset of nonlinear flow decreases with the increasing aperture,fracture number and roughness,following a power function.The increases in fracture aperture and number provide more paths for fluid flow,increasing both the viscous and inertial permeabilities.The value of the inertial permeability is approximately four orders of magnitude greater than the viscous permeability,following a power function with an exponent a of 3,and a proportional coefficient b mathematically correlated with the geometrical parameters.

3D-Printed PLA Filaments Reinforced with Nanofibrillated Cellulose

In the current study poly(lactic acid)PLA composites with a 3 wt%and 5 wt%of nanofibrillated cellulose(NFC)were produced by 3D-printing method.An enzymatic pretreatment coupled with mechanical fibrillation in a twin screw extruder was used to produce high consistency NFC.Scanning electron microscopy(SEM)equipped with Fibermetric software,FASEP fiber length distribution analysis,Furrier transform infrared spectroscopy(FT-IR),thermogravimetric analysis(TGA),tensile tests,impact tests and differential scanning calorimetry were used to characterize NFC and PLA/NFC composites.The results of the fiber length and width measurements together with the results of the SEM analysis showed that enzymatic hydrolysis coupled with a twin screw extrusion could effectively reduce the diameter and length of cellulose fibers.The produced NFC consisted of microand nanosized fibers entangled in a characteristic 3D-network.Based on the FT-IR analysis,no new bonds were formed during the enzymatic hydrolysis or fibrillation process.The TGA analysis confirmed that produced NFC can be used in hightemperature extrusion processing without NFC degradation.During the PLA/NFC composites preparation the NFC agglomerates were formed,which negatively influenced PLA/NFC composites impact properties.The slightly improved tensile strength and elastic modulus were reported for all composites when compared to the neat PLA.The elongation at break was not affected by the NFC addition.No significant differences in thermal stability were detectable among composites nor in comparation with the neat PLA.However,the crystallinity degree of the composite containing 5 wt%NFC was increased in respect to the neat PLA.

Use of 3D-printed animal models as a standard method to test avian behavioral responses toward nest intruders in the studies of avian brood parasitism

Living and/or non-living animal models are often used as stimuli to observe the behavioral responses of the target animals.In the past,parasites,predators,and harmless controls have been used to test host anti-parasitism defense behavior,and their taxidermy specimens have been widely used as a set of standard methods for the study of avian brood parasitism.In recent years,with the rapid development of 3D-printing technology,3D-printed bird models are expected to be applied as a standard method in the study of avian brood parasitism.To evaluate the use of 3D-printed models,this study tests the reaction of Oriental Reed Warbler(Acrocephalus orientalis)towards predators,parasites,or controls,and compares the reaction among different nest intruders and between taxidermy specimens and 3D-printed animal models.It was found that the Oriental Reed Warbler responded most aggressively to the parasite,followed by predator,and finally the control;the results were consistent between the reaction to taxidermy specimens and 3D-printed animal models,indicating that 3D-printed models could serve as a substitute for taxidermy specimens.We propose a series of advantages of using 3D-printed models and suggest them to be a standard method for widespread use in future studies of avian brood parasitism.

Improving Strength of Carbon Fiber Grafted Carbon Nanotube Reinforced Thermoplastic Composites by 3D-Printed Molding

To improve the strength of carbon fiber(CF) reinforced Polycaprolactam(PA6) composites, controlled amounts of carbon nanotubes(CNTs) were grafted onto the surface of CF to prepare the hybrid reinforcement(HR). We used HR to fabricate laminate and H-sample to test the interfacial bonding strength(IBS) of the composites by means of a novel process called three-dimensional printed molding(3 D-PM). By using the melt drop printing method, we measured the contact angles between PA6 and CF(without sizing) and between PA6 and HR. The IBS and the mechanical properties of the composites were obtained by the tensile test. The experimental result indicated that CF grafted by 0.25% weight fraction of CNT or more could develop a special microstructure similar to the micro-pits on the surface of CF, which improved the wettability of CF and PA6 due to the increased surface area and the roughness of CF. When the weight fraction of CNT reached 0.25%, the IBS increased by 41.8%, the tensile strength by 130%, and the interfacial shear strength(IFSS) by 238%. The interfacial dimple fracture was observed by Scanning Electron Microscope(SEM), which revealed that the composites were able to absorb more deforming energy before fracture. The modified surface microstructure of CF would prevent crack propagation at the interface and increase the mechanical properties of thermoplastic composites(TPCs).

一种基于活塞连续工作原理的3D食品打印笔

介绍一种基于活塞连续工作原理的3D打印笔的结构特点以及主要工作原理,并建立系统的数学模型。与以往的3D打印笔相比,其打印材料由ABS等塑性材料变成如液态巧克力等液态材料,使得打印材料范围得到扩展,并且设计合理,使用方便,有助于其它3D打印笔的研发与设计。

Simvastatin/hydrogel-loaded 3D-printed titanium alloy scaffolds suppress osteosarcoma via TF/NOX2-associated ferroptosis while repairing bone defects

Postoperative anatomical reconstruction and prevention of local recurrence after tumor resection are two vital clinical challenges in osteosarcoma treatment.A three-dimensional(3D)-printed porous Ti6Al4V scaffold(3DTi)is an ideal material for reconstructing critical bone defects with numerous advantages over traditional implants,including a lower elasticity modulus,stronger bone-implant interlock,and larger drug-loading space.Simvastatin is a multitarget drug with anti-tumor and osteogenic potential;however,its efficiency is unsatisfactory when delivered systematically.Here,simvastatin was loaded into a 3DTi using a thermosensitive poly(lactic-co-gly-colic)acid(PLGA)-polyethylene glycol(PEG)-PLGA hydrogel as a carrier to exert anti-osteosarcoma and oste-ogenic effects.Newly constructed simvastatin/hydrogel-loaded 3DTi(Sim-3DTi)was comprehensively appraised,and its newfound anti-osteosarcoma mechanism was explained.Specifically,in a bone defect model of rabbit condyles,Sim-3DTi exhibited enhanced osteogenesis,bone in-growth,and osseointegration compared with 3DTi alone,with greater bone morphogenetic protein 2 expression.In our nude mice model,simvastatin loading reduced tumor volume by 59%-77%without organic damage,implying good anti-osteosarcoma activity and biosafety.Furthermore,Sim-3DTi induced ferroptosis by upregulating transferrin and nicotinamide adenine dinucleotide phosphate oxidase 2 levels in osteosarcoma both in vivo and in vitro.Sim-3DTi is a promising osteogenic bone substitute for osteosarcoma-related bone defects,with a ferroptosis-mediated anti-osteosarcoma effect.

3D-printed MoS_(2)/Ni electrodes with excellent electro-catalytic performance and long-term stability for dechlorination of florfenicol

Here,we report the production of 3D-printed MoS_(2)/Ni electrodes(3D-MoS_(2)/Ni)with longterm stability and excellent performance by the selective laser melting(SLM)technique.As a cathode,the obtained 3D-MoS_(2)/Ni could maintain a degradation rate above 94.0%for forfenicol(FLO)when repeatedly used 50 times in water.We also found that the removal rate of FLO by 3D-MoS_(2)/Ni was about 12 times higher than that of 3D-printed pure Ni(3D-Ni),attributed to the improved accessibility of H^(*).In addition,the electrochemical characterization results showed that the electrochemically active surface area of the 3D-MoS_(2)/Ni electrode is about 3-fold higher than that of the 3D-Ni electrode while the electrical resistance is 4 times lower.Based on tert-butanol suppression,electron paramagnetic resonance and triple quadrupole mass spectrometer experiments,a“dual path”mechanism and possible degradation pathway for the dechlorination of FLO by 3D-MoS_(2)/Ni were proposed.Furthermore,we also investigated the impacts of the cathode potential and the initial pH of the solution on the degradation of FLO.Overall,this study reveals that the SLM 3D printing technique is a promising approach for the rapid fabrication of high-stability metal electrodes,which could have broad application in the control of water contaminants in the environmental field.

Enhanced osteochondral regeneration with a 3D-Printed biomimetic scaffold featuring a calcified interfacial layer

The integrative regeneration of both articular cartilage and subchondral bone remains an unmet clinical need due to the difficulties of mimicking spatial complexity in native osteochondral tissues for artificial implants.Layer-by-layer fabrication strategies,such as 3D printing,have emerged as a promising technology replicating the stratified zonal architecture and varying microstructures and mechanical properties.However,the dynamic and circulating physiological environments,such as mass transportation or cell migration,usually distort the pre-confined biological properties in the layered implants,leading to undistinguished spatial variations and subsequently inefficient regenerations.This study introduced a biomimetic calcified interfacial layer into the scaffold as a compact barrier between a cartilage layer and a subchondral bone layer to facilitate osteogenic-chondrogenic repair.The calcified interfacial layer consisting of compact polycaprolactone(PCL),nano-hydroxyapatite,and tasquinimod(TA)can physically and biologically separate the cartilage layer(TA-mixed,chondrocytes-load gelatin methacrylate)from the subchondral bond layer(porous PCL).This introduction preserved the as-designed independent biological environment in each layer for both cartilage and bone regeneration,successfully inhibiting vascular invasion into the cartilage layer and preventing hyaluronic cartilage calcification owing to devascularization of TA.The improved integrative regeneration of cartilage and subchondral bone was validated through gross examination,micro-computed tomography(micro-CT),and histological and immunohistochemical analyses based on an in vivo rat model.Moreover,gene and protein expression studies identified a key role of Caveolin(CAV-1)in promoting angiogenesis through the Wnt/β-catenin pathway and indicated that TA in the calcified layer blocked angiogenesis by inhibiting CAV-1.

Facile and rapid fabrication of a novel 3D-printable,visible light-crosslinkable and bioactive polythiourethane for large-to-massive rotator cuff tendon repair

Facile and rapid 3D fabrication of strong,bioactive materials can address challenges that impede repair of large-to-massive rotator cuff tears including personalized grafts,limited mechanical support,and inadequate tissue regeneration.Herein,we developed a facile and rapid methodology that generates visible light-crosslinkable polythiourethane(PHT)pre-polymer resin(~30 min at room temperature),yielding 3D-printable scaffolds with tendon-like mechanical attributes capable of delivering tenogenic bioactive factors.Ex vivo characterization confirmed successful fabrication,robust human supraspinatus tendon(SST)-like tensile properties(strength:23 MPa,modulus:459 MPa,at least 10,000 physiological loading cycles without failure),excellent suture retention(8.62-fold lower than acellular dermal matrix(ADM)-based clinical graft),slow degradation,and controlled release of fibroblast growth factor-2(FGF-2)and transforming growth factor-β3(TGF-β3).In vitro studies showed cytocompatibility and growth factor-mediated tenogenic-like differentiation of mesenchymal stem cells.In vivo studies demonstrated biocompatibility(3-week mouse subcutaneous implantation)and ability of growth factor-containing scaffolds to notably regenerate at least 1-cm of tendon with native-like biomechanical attributes as uninjured shoulder(8-week,large-to-massive 1-cm gap rabbit rotator cuff injury).This study demonstrates use of a 3D-printable,strong,and bioactive material to provide mechanical support and pro-regenerative cues for challenging injuries such as large-to-massive rotator cuff tears.

Low-molecular-weight fucoidan inhibits the proliferation of melanoma via Bcl-2 phosphorylation and PTEN/AKT pathway

Fucoidan,a sulfate polysaccharide obtained from brown seaweed,has various bioactive properties,including anti-inflammatory,anti-cancer,anti-viral,anti-oxidant,anti-coagulant,anti-thrombotic,anti-angiogenic,and anti-Helicobacter pylori properties.However,the effects of low-molecular-weight fucoidan(LMW-F)on melanoma cell lines and three dimensional(3D)cell culture models are not well understood.This study aimed to investigate the effects of LMW-F on A375 human melanoma cells and cryopreserved biospecimens derived from patients with advanced melanoma.Ultrasonic wave was used to fragment fucoidan derived from Fucus vesiculosus into smaller LMW-F.MTT and live/dead assays showed that LMW-F inhibited cell proliferation in both A375 cells and patientderived melanoma explants in a 3D-printed collagen scaffold.The PTEN/AKT pathway was found to be involved in the anti-melanoma effects of fucoidan.Western blot analysis revealed that LMW-F reduced the phosphorylation of Bcl-2 at Thr 56,which was associated with the prevention of anti-apoptotic activity of cancer cells.Our findings suggested that LMW-F could enhance anti-melanoma chemotherapy and improve the outcomes of patients with melanoma resistance.

(5R,6S)-2-(4-甲氧基)苯基-6-[(1R)-叔丁基二甲基硅氧乙基]-青霉烯-3-羧酸乙酯的合成

以(3R,4R)-3-[(1R)-叔丁基二甲基硅氧乙基]-乙酰氧基氮杂环丁-2-酮(4AA)为原料,经取代、酰化、Wittig反应,合成了标题化合物,化合物结构经1HNMRI、R、元素分析和质谱表征。

Multidirectional 3D printed functionally graded modular joint actuated by TCPFL muscles for soft robots

Highly deformable bodies are essential for numerous types of applications in all sorts of environments. Joint-like structures comprising a ball and socket joint have many degrees of freedom that allow mobility of many biomimetic structures. Recently, soft robots are favored over rigid structures for their highly compliant material, high-deformation properties at low forces, and ability to operate in di fficult environments. However, it is still challenging to fabricate complex designs that satisfy application constraints due to the combined e ffects of material properties, actuation method, and structural geometry on the performance of the soft robot. Therefore, a combination of a rigid joint and a soft body can help achieve modular robots with fully functional body morphology. Yet, the fabrication of soft parts requires extensive molding for complex shapes, which comprises several processes and can be time-consuming. In addition, molded connections between extremely soft materials and hard materials can be critical failing points. In this paper, we present a functionally graded 3D-printed joint-like structure actuated by novel contractile actuators. Functionally graded materials (FGMs) via 3D printing allow for extensive material property enhancement and control which warrant tunable functionalities of the system. The 3D-printed structure is made of 3 rigid ball and socket joints connected in series and actuated by integrating twisted and coiled polymer fishing line ( TCPFL) actuators, which are con fined in the FGM accordion-shaped channels. The implementation of the untethered T CPFL actuation system can be highly bene ficial for deployment in environments that require low vibrations and silent actuation. The fishing line TCP actuators produce an actuation strain up to 40% and bend the joint up to 40° in any direction. The T CPFL can be actuated individually or as a group to control the bending trajectory of the modular joint, which is bene ficial when deployed in areas that contain small crevices. Obtaining complex modes of bending, the FGM multidirectional joint demonstrated a great potential to achieve di fferent functionalities such as crawling, rolling, swimming, or underwater exploration.

Breakdown characteristics of CF_3I/N_2/CO_2 mixture in power frequency and lightning impulse voltages

Trifluoroiodomethane(CF_3I) and its mixtures are believed to be prospective alternatives to sulfur hexafluoride(SF6), which has been included as a greenhouse gas. In this paper, the breakdown properties of a CF_3I/N_2/CO_2 mixture with the volume fraction of CF_3I fixed at 10% are investigated under power frequency and lightning impulse voltages. The experimental result shows that N_2 possesses higher power frequency and negative lightning impulse breakdown voltages than CO_2, but the power frequency and more negative lightning impulse breakdown voltages of the CF_3I/N_2/CO_2 mixture do not increase with the content of N_2. For the purpose of explaining this abnormal phenomenon, the ionization energies and excitation energies of CF_3I,N_2and CO_2 are calculated. The computation results indicate that the ionization energy of CF_3I is lower than the first excitation energy of N_2, but higher than the lowest excitation energy of CO_2,which means that CF_3I molecules are easily ionized by metastable N_2 molecules. The first excitation energy of N_2 is too high, which hinders its application as the buffer gas of CF_3I.

Application of computer tomography-based 3D reconstruction technique in hernia repair surgery

BACKGROUND Hernia is a common condition requiring abdominal surgery.The current standard treatment for hernia is tension-free repair using meshes.Globally,more than 200 new types of meshes are licensed each year.However,their clinical applications are associated with a series of complications,such as recurrence(10%-24%)and infection(0.5%-9.0%).In contrast,3D-printed meshes have significantly reduced the postoperative complications in patients.They have also shortened operating time and minimized the loss of mesh materials.In this study,we used the myopectineal orifice(MPO)data obtained from preoperative computer tomography(CT)-based 3D reconstruction for the production of 3D-printed biologic meshes.AIM To investigate the application of multislice spiral CT-based 3D reconstruction technique in 3D-printed biologic mesh for hernia repair surgery.METHODS We retrospectively analyzed 60 patients who underwent laparoscopic tension-free repair for inguinal hernia in the Department of General Surgery of the First Hospital of Shanxi Medical University from September 2019 to December 2019.This study included 30 males and 30 females,with a mean age of 40±5.6 years.Data on the MPO were obtained from preoperative CT-based 3D reconstruction as well as from real-world intraoperative measurements for all patients.Anatomic points were set for the purpose of measurement based on the definition of MPO:A:The pubic tubercle;B:Intersection of the horizontal line extending from the summit of the inferior edge of the internal oblique and transversus abdominis and the outer edge of the rectus abdominis,C:Intersection of the horizontal line extending from the summit of the inferior edge of the internal oblique and transversus abdominis and the inguinal ligament,D:Intersection of the iliopsoas muscle and the inguinal ligament,and E:Intersection of the iliopsoas muscle and the superior pubic ramus.The distance between the points was measured.All preoperative and intraoperative data were analyzed using the t test.Differences with P<0.05 were considered significant in comparative analysis.RESULTS The distance between points AB,AC,BC,DE,and AE based on preoperative and intraoperative data was 7.576±0.212 cm vs 7.573±0.266 cm,7.627±0.212 cm vs 7.627±0.212 cm,7.677±0.229 cm vs 7.567±0.786 cm,7.589±0.204 cm vs 7.512±0.21 cm,and 7.617±0.231 cm vs 7.582±0.189 cm,respectively.All differences were not statistically significant(P>0.05).CONCLUSION The use of multislice spiral CT-based 3D reconstruction technique before hernia repair surgery allows accurate measurement of data and relationships of different anatomic sites in the MPO region.This technique can provide precise data for the production of 3D-printed biologic meshes.