Prospects of 3D Printing Technology in Dental Medicine

With the continuous advancement of technology,the application of 3D printing technology in the field of dental medicine is becoming increasingly widespread.This article aims to explore the current applications and future potential of 3D printing technology in dental medicine and to analyze its benefits and challenges.It first introduces the current state of 3D printing technology in dental implants,crowns,bridges,orthodontics,and maxillofacial surgery.It then discusses the potential applications of 3D printing technology in oral tissue engineering,drug delivery systems,personalized dental prosthetics,and surgical planning.Finally,it analyzes the benefits of 3D printing technology in dental medicine,such as improving treatment accuracy and patient comfort,and shortening treatment times,while also highlighting the challenges faced,such as costs,material choices,and technical limitations.This article aims to provide a reference for professionals in the field of dental medicine and to promote the further application and development of 3D printing technology in this area.

Application and Implementation of Quest3D Technology in Garden Landscape Design

The application of virtual reality technology has become more and more influential in garden design. Quest3D as a significant software to realize the virtual reality technology is utilized in this study to make a garden roaming demonstration system with the gardening design of a classical courtyard as an example. Besides, the advantages and disadvantages of applying Quest3D technology in garden landscape design are elaborated from the perspective of the selection of Quest3D technology, basic procedures for the selection and establishment of software and hardware.

Simulation on deposition and solidification processes of 7075 Al alloy droplets in 3D printing technology

In order to study the successive deposition and solidification processes of uniform alloy droplets during the drop-on-demand three dimensional（3D） printing method,based on the volume of fluid（VOF） method,a 3D numerical model was employed.In this model,the 7075 alloy with larger temperature range for phase change was used.The simulation results show that the successive deposition and solidification processes of uniform 7075 alloy droplets can be well characterized by this model.Simulated droplets shapes agree well with SEM images under the same condition.The effects of deposition and solidification of droplets result in vertical and L-shaped ridges on the surface of droplets,and tips of dendrites appear near the overlap of droplets due to rapid solidification.

Degradation and mineralization of aniline by O_3/Fenton process enhanced using high-gravity technology

The degradation and mineralization of aniline （AN） using ozone combined with Fenton reagent （O3/Fenton） in a rotating packed bed （RPB） was proposed in this study, and the process （RPB-O3/Fenton） was compared with conventional O3/Fenton in a stirred tank reactor （STR-O3/Fenton） or single ozonation in an RPB （RPB-O3）, Effects of high gravity factor, H2O2 dosage, H2O2 dosing method and initial pH on the AN mineralization efficiency were investigated in the RPB-O3/Fenton process, In addition, the behavior of Fe（Ⅱ） was monitored at different H2O2 dosing methods and pH values. Finally, the optimal operation conditions were determined with high gravity factor of 100, initial pH of 5, Fe（Ⅱ） concentration of 0.8 mmol·L-1 and H2O2 dosage of 2.5 ml. Under these conditions, for aniline wastewater at the volume of I L and concentration of 200 mg· L- 1 ,a fast and thorough decay of AN was conducted in 10 min, and the TOC removal efficiency reached 89% in 60 min. The main intermediates of p-benzoquinone, nitrobenzene, maleic acid and oxalic acid were identified by liquid chromatography/mass spectroscopy （LC/MS）, and the degradation pathways of AN in RPB-O3/Fenton system were proposed based on experimental evidence. It could be envisioned that high-gravity technology combined with O3/Fenton processes would be promising in the rapid and efficient mineralization ofwastewater.

Assessment and Risk Zonation of Landslides in Panxi Area Based on 3S Technology

Based on field survey located by GPS, it is obtained landslides＇ location and distribution information by the method of remote sensing in this paper. The vector data of environmental factors that breed and induce landslides such as the elevation, the slope, the vegetation cover, the lithology, the rainfall and so on are gained using GIS（geographical information system） techniques of spatial analysis. All the data obtained are managed through building landslide management system. At the same time, the system is made the platform to appraise the relationship between the distribution of landslides and the environmental factors. The results indicate： landslides take place relatively easily in the slope range between 10° and 25°; most landslides are in the mixed area of bush and grass with a coverage degree of from 20° to 65°; the distribution of landslides has a positive relationship with the distribution of annual rainfall. The risk degree of Panxi Area is zoned and mapped by the model of liner stack using GIS technique, and the result indicates： the place of high risk degree is the belt of Panzhihua-Miyi-Dechang-Mugu and southeast of Huili county and Huidong county,and area is about 512 707 hm^2.

Evaluation of reservoir connectivity using whole-oil gas chromatographic fingerprint technology: A case study from the Es_3~3 reservoir in the Nanpu Sag, China

In this study, whole-oil gas chromatographic fingerprint analyses were performed on oils from the Es3^3 reservoir in the Liubei area of the Nanpu Sag. The gas chromatographic peaks of cyclic and branched alkanes with relatively high resolution from nCl0 to nC25 were selected to establish a database of whole-oil gas chromatographic peak height ratio fingerprints. Reservoir fluid connectivity was identified by using clustering analysis. This method can reflect the gas chromatography fingerprint information accurately and entirely, and avoid the one-sidedness of the star diagram method which only selects several fixed gas chromatographic peaks.

Experimental investigation on the invert stability of operating railway tunnels with different drainage systems using 3D printing technology

In recent years, the invert anomalies of operating railway tunnels in water-rich areas occur frequently,which greatly affect the transportation capacity of the railway lines. Tunnel drainage system is a crucial factor to ensure the invert stability by regulating the external water pressure(EWP). By means of a threedimensional(3D) printing model, this paper experimentally investigates the deformation behavior of the invert for the tunnels with the traditional drainage system(TDS) widely used in China and its optimized drainage system(ODS) with bottom drainage function. Six test groups with a total of 110 test conditions were designed to consider the design factors and environmental factors in engineering practice,including layout of the drainage system, blockage of the drainage system and groundwater level fluctuation. It was found that there are significant differences in the water discharge, EWP and invert stability for the tunnels with the two drainage systems. Even with a dense arrangement of the external blind tubes, TDS was still difficult to eliminate the excessive EWP below the invert, which is the main cause for the invert instability. Blockage of drainage system further increased the invert uplift and aggravated the track irregularity, especially when the blockage degree is more than 50%. However, ODS can prevent these invert anomalies by reasonably controlling the EWP at tunnel bottom. Even when the groundwater level reached 60 m and the blind tubes were fully blocked, the invert stability can still be maintained and the railway track experienced a settlement of only 1.8 mm. Meanwhile, the on-site monitoring under several rainstorms further showed that the average EWP of the invert was controlled within 84 k Pa, while the maximum settlement of the track slab was only 0.92 mm, which also was in good agreement with the results of model test.

Methods of extracting change information and updating land use/cover map based on 3S technology

A fully automated approach for detecting land use/cover change using remote sensing data, GIS data, GPS data is presented. The integrating raster with vector methods of updating the basic land use/land cover map based on 3S technology is becoming one of the most important developing directions in 3S application fields, land-use and cover change fields over the world. It has been successful applied in two tasks of the Ministry of Land and Resources of China, and takes some benefit.

Application of 3D stereoscopic visualization technology in casting aspect

3D stereoscopic visualization technology is coming into more and more common use in the field of entertainment,and this technology is also beginning to cut a striking figure in casting industry and scientific research.The history,fundamental principle,and devices of 3D stereoscopic visualization technology are reviewed in this paper.The authors’research achievements on the 3D stereoscopic visualization technology in the modeling and simulation of the casting process are presented.This technology can be used for the observation of complex 3D solid models of castings and the simulated results of solidification processes such as temperature,fluid flow,displacement,stress strain and microstructure,as well as the predicted defects such as shrinkage/porosity,cracks,and deformation.It can also be used for other areas relating to 3D models,such as assembling of dies,cores,etc.Several cases are given to compare the illustration of simulated results by traditional images and red-blue 3D stereoscopic images.The spatial shape is observed better by the new method.The prospect of3D stereoscopic visualization in the casting aspect is discussed as well.The need for aided-viewing devices is still the most prominent problem of 3D stereoscopic visualization technology.However,3D stereoscopic visualization represents the tendency of visualization technology in the future;and as the problem is solved in the years ahead,great breakthroughs will certainly be made for its application in casting design and modeling and simulation of the casting processes.

Anisotropic creep behavior of soft-hard interbedded rock masses based on 3D printing and digital imaging correlation technology

Three-dimensional(3D)printing technology is increasingly used in experimental research of geotechnical engineering.Compared to other materials,3D layer-by-layer printing specimens are extremely similar to the inherent properties of natural layered rock masses.In this paper,soft-hard interbedded rock masses with different dip angles were prepared based on 3D printing(3DP)sand core technology.Uniaxial compression creep tests were conducted to investigate its anisotropic creep behavior based on digital imaging correlation(DIC)technology.The results show that the anisotropic creep behavior of the 3DP soft-hard interbedded rock mass is mainly affected by the dip angles of the weak interlayer when the stress is at low levels.As the stress level increases,the effect of creep stress on its creep anisotropy increases significantly,and the dip angle is no longer the main factor.The minimum value of the long-term strength and creep failure strength always appears in the weak interlayer within 30°–60°,which explains why the failure of the layered rock mass is controlled by the weak interlayer and generally emerges at 45°.The tests results are verified by comparing with theoretical and other published studies.The feasibility of the 3DP soft-hard interbedded rock mass provides broad prospects and application values for 3DP technology in future experimental research.

Review of Digital Campus Construction Led by Virtual Reality Technology

In recent years,the government has issued a series of documents to promote the construction of digital campuses.This initiative serves to encourage the deep integration of information technology and intelligent technology education and digital reform,the combination of virtual reality and campus management is the need for innovative thinking and economic and social development,and then better change our learning style and living environment.The construction of the digital campus is based on virtual reality technology,BIM,GIS,and three-dimensional modeling technology to provide an immersive platform for students,promote the integration of virtual reality technology and education,help teachers,students,and parents to understand all kinds of education information and resources,to achieve their interoperability.From the off-campus environment to the school teaching equipment,teachers to teaching quality certification,and learning,to extracurricular entertainment,opening ceremonies to graduation parties,to bring more efficient,convenient,and safe campus life for teachers,students,and staff in school,and break the traditional information restrictions.

Application of Digital Technology in Road and Bridge Design

With the development and progress of science and technology,road and bridge design has experienced rapid development,from the initial manual drawing design to the popularity of Computer-Aided Design(CAD),and then to today’s digital software design era.Early designers relied on hand-drawn paper design forms which was time-consuming and error-prone.Digital support for road and bridge design not only saves the design time but the design quality has also achieved a qualitative leap.This paper engages in the application of digital technology in road and bridge design,to provide technical reference for China’s road and bridge engineering design units,to promote the popularity of Civil3D and other advanced design software in the field of engineering design and development,ultimately contributing to the sustainable development of China’s road and bridge engineering.

A Brief Review of 3S Technology Application on Biodiversity Monitoring and Assessment

Remote sensing,geographic information system and GPS(3S)technology have been well recognized as comprehensive,accurate and up-to-date information collection methods,which are increasingly adopted in biodiversity conservation.This review summarizes the application of object-oriented classification methods on biodiversity monitoring projects based on high-resolution remote sensing imagines in China.Biodiversity conservation research based on GIS technology in China is also discussed,with emphasis on the advantages of GIS analysis and modeling function.

3-Dimensional Body Measurement Technology

3 - dimensional body measurement technology, the basis of developing high technology in industry, accelerates digital development of aplparel industry. This paper briefly introduces the history of 3 - dimensional body measurement technology, and recounts the principle and primary structure of some types of 3 - dimensional automatic body measurement system. With this understanding, it discusses prospect of 3- dimensional CAD and virtual technology used in apparel industry.

Preparation of a High-Performance Si_3N_4 Ceramic Using Self-Reinforcing Technology

The self-reinforced Si_3N_4 ceramics which contain Y_2O_3 and La_2O_3 additives have been prepared by hot-pressing. Under the optimum processing conditions, this material has the flexural strength of 960～1050MPa and the fracture toughness of 11.17～12.74MPa·m^(1/2) at room-temperature, and 720～780MPa and 22～24MPa·m^(1/2) at 1350℃. The effects of heat ing rate, sintering temperature, and holding time on the microstructures and mechanical properties are investigated. The experimental results show that an appropriate β-Si_3N_4 grain size and homogeneous microstructure can be obtained under the conditions of a heating rate of 10℃/min, sintering temperature of 1800℃, and holding time of 1h, which are advantageous to enhancing the mechanical properties. Crack deflection in large rodlike β-Si_3N_4 grains is a principle source of toughening.

Review of the applications of 3D printing technology in the field of piezoelectric ceramics

As advanced functional materials,piezoelectric ceramics are widely used in various fields,including the medical,aviation,and military industries.With the advancement of science and technology,the piezoelectric ceramics needed in special fields have become more intelligent,diverse and lightweight.The shapes and structures of piezoelectric ceramics are becoming more complex.Traditional piezoelectric ceramic preparation technology has been unable to meet the high-speed and complex production demands of various industries.Considering this situation,3D printing technology has attracted much attention in the field of piezoelectric ceramics.In this paper,the applications of several main 3D printing techniques in the field of piezoelectric ceramics are mainly introduced,and their development statuses,process characteristics and achievements are summarized.The advantages and disadvantages of each printing technique are summarized and compared.The challenges and possible future trends of 3D printing when manufacturing piezoelectric ceramics are summarized and proposed.

Application of 3-D Parallel Electrical Technology Detecting the Water-Rich Areas

Coal working face is damaged more and more seriously by water below the coal face floor. Therefore, floor water detection is a must in the process of extraction. This article aims to introducing application and principle of the two-gateways parallel 3-D electrical technology and the arrangement of the observation system. The authors use this method to detect the water under the floor of a mine in north of Anhui. The results show that the two-gateways parallel 3-D electrical technology can accurately locate the water-rich areas, providing the basis for drilling drainage and grouting construction.

3D Seismic Technology Applications to the Analysis of Sedimentary Basins

The recent advances of 3D seismic technique applied in geological study of sedimentary basin analysis were reviewed.The achievements in the study of the sedimentology,structural analysis, fluid-rock interaction and igneous geology were summarized.Because 3D seismic resolution and interpretation technology are enhanced surprisingly。

EFFECT OF Fe_2O_3 ON WELDING TECHNOLOGY AND MECHANICAL PROPERTIES OF WELD METAL DEPOSITED BY SELF-SHIELDED FLUX CORED WIRE

Five experimental self-shielded flux cored wires are fabricated withdifferent amount of Fe_2O_3 in the flux. The effect of Fe_2O_3 on welding technology and mechanicalproperties of weld metals deposited by these wires are studied. The results show that with theincrease of Fe_2O_3 in the mix, the melting point of the pretreated mix is increased. LiBaF_3 andBaFe_(12)O_(19), which are very low in inherent moisture, are formed after the pretreatment. Themechanical properties are evaluated to the weld metals. The low temperature notch toughness of theweld metals is increased linearly with the Fe_2O_3 content in the flux due to the balance betweenFe_2O_3 and residual Al in the weld metal. The optimum Fe_2O_3 content in flux is 2.5 percent approx3.5 percent.

Research of 3S technology applied in land reclamation of minefield

Based on the basic theory description of 3S,and gave the example of dump of Hanzhou open-pit which belongs to Fuxin Mining Group,first of all,used the GPS tech- nology of static and RTK to get the three-dimensional position of the points in survey con- trol network and the topographic maps before and after the reclamation in reclamation area;used the technology of GPS RTK to calibrate the geometric elements designed in land reclamation,at the same time to get the actual coordinates of the design point after layout.Then,used RS technology to supervise systematically on land reclamation of min- ing area from the time to space;finally,used GIS technology to display 3-D visualization, analyze,manage,and enquire the date obtained by GPS and RS data,which can facilitate the decision decision-makers to plan land reclamation current and long-term,and can be extended to other mines which have same or similar conditions.