UPLC-MS/MS法测定槲寄生抗肿瘤成分1,7-bis(4-hydroxyphenyl)-1,4-heptadien-3-one的含量

目的建立超高效液相色谱-串联质谱法(UPLC/MS/MS)测定槲寄生中具有抗肿瘤活性的新化合物1,7-bis(4-hydroxyphenyl)-1,4-heptadien-3-one(BHPHD)的含量,并通过多因素方差分析比较产地与寄主对药材抗肿瘤成分含量的影响。方法以Thermo Hypersil GOLD C18(50 mm×2.1 mm,1.9μm)为分离色谱柱,乙腈-体积分数0.1%甲酸水溶液为流动相,流速0.2 m L·min-1,梯度洗脱,质谱检测器,电喷雾正离子,多反应监测模式,监测离子对m/z 295.09→106.99。结果BHPHD在质量浓度为0.050~2.5 mg·L-1内线性关系良好,精密度、重复性、稳定性试验的RSD均≤3.5%,平均加样回收率(n=9)为97.2%(RSD=1.6%)。结论该方法可满足定量要求。多因素方差分析表明槲寄生中BHPHD的含量受产地影响较大(P<0.01),受寄主影响不大。

Synthesis,Structural Characterization and Properties of Bis(1,5-diamino-1Htetrazolium)3,3'-bis(nitramino)-4,4'-azofurazan

An energetic salt of bis（l,5-diamino-lH-tetrazolium）3,3＂-bis（nitramino）-4, 4x-azo- furazan （C6H10N2206） was synthesized with the total yield of 61.7% by using 3,4-diaminofurazan （DAF） as the starting material. The structure of the title compound was confirmed by NMR, IR, elemental analysis and single-crystal X-ray diffraction. It crystallizes in orthorhombic, space group P21/c with a = 10.739（2）, b = 6.4765（12）, c = 14.138（3） A, fl= 108.787（3）°, V= 930.9（3） A3, Z = 1, Mr= 486.36, Dc = 1.735 g.cm3, μ= 0.15 mm-1, F（000） = 496, R = 0.042 and wR = 0.121. The thermal stability was analyzed by subsequently differential scanning calorimetry （DSC）. And the enthalpy of formation and detonation was calculated theoretically, showing the first decomposition temperature was 142.1℃, the enthalpy of formation was 1614.23 kJ.mol1 and the detonation velocity and detonation pressure were 8.781 km.s-1 and 30.7 GPa, respectively.

Synthesis Characterization Non-isothermal Kinetics of the Thermal Decomposition and Redox Properties Derived from Copper(Ⅱ) Binuclear Coordination Compound of 1,4-Bis-(1'-Phenyl-3'-Methyl-5'-Pyrazolone-4')-1,4-Butanedione

The paper reports the synthetic procedure and character of Copper(II) binuclearcoordination compound of 1,4-bis-(1'-phenyl-3'-methyl-5'-pyrazolone Thenon-isothermal kinetics of thermal decomposition of the complex has been stUdied from the TG-DTGcurves by means of the Achar et al. and Coats-Redfern methods,the most probab1e kinetic equation canbe expressed as dofdtrAe -E / RT * l /(2Q).The corresponding kinetic compensation effect expressions arefound to be lnuA=0. 1794E+0. 1689.The non-isothermal thermal decomposition process of the complex isone-dimensional diffusion.But electrochemical studies of the complex(Cu2L'2)from cyclic voltamrnetriccurves by means of powder microelectrodes technique'',shows one two-electron irreversible process.

Syntheses and Characterization of Two Novel Copper(II) Malonate Complexes Functionalized with 3,3’-Bis(pyrazolyl)pentane and 4,4’-Trimethylenedipyridine

Two novel copper complexes (1,2) with N,O-donor ligands were synthesized by reaction of copper(II) malonates with 3,3’-bis(pyrazolyl)pentane and 4,4’-trimethylenedipyridine in methanol at moderate temperature. These compounds were characterized by elemental analysis, UV-VIS, IR spectroscopies and powder X-ray diffraction analyses. Compound (1) melts at higher temperature (202°C) than compound (2) (100°C). The IR spectra showed typical vibrations related to C=N and C=C, characteristic of pyrazolyl and pyridine ligands.

Solubility and metastable zone width measurement of 3,4-bis (3-nitrofurazan-4-yl) furoxan (DNTF) in ethanol + water

The solubility and supersolubility of 3,4-bis(3-nitrofurazan-4-yl)furoxan(DNTF) in ethanol + water at different operation were determined by laser monitoring system under atmospheric pressure to study the metastable zone width(MSZW). The modified Apelblat equation was adopted to correlate the experimental solubility data, and the correlation result showed perfect consistent with the experimental data. The standard dissolution enthalpy, standard dissolution entropy and Gibbs energy were calculated according to the experimental solubility data. The effect of the cooling rate, stirring rate, temperature and the concentration of ethanol + water on the MSZW was studied. It was found that the MSZW of DNTF increased with the increasing cooling rate, decreasing temperature, decreasing stirring rate and decreasing ratio of water. And the apparent nucleation order of DNTF in ethanol + water was calculated by the relationship between the cooling rate and the MSZW.

Synthesis and Structural Characterization of 2,3-Bis(hydroxymethyl)-2,3-dinitro-1,4-butanediol

2,3-Bis（hydroxymethyl）-2,3-dinitro-1,4-butanediol（C6H12N2O8） was synthesized by condensation,cyclization,oxidative dimerization and deketalization of nitromethane with a total yield of 42.4%.The structure of the title compound was characterized by 1H NMR,13C NMR,FT-IR,elementary analysis,and X-ray single-crystal diffraction analysis,which reveals that the title compound crystallizes in triclinic,space group P with a = 0.6324（2）,b = 0.6454（3）,c = 0.7062（3） nm,α= 111.550（4）,β= 95.505（4）,γ= 113.395（4）°,V = 0.23595（16） nm3,Z = 1,Mr = 240.18,Dc = 1.690 g·cm-3,μ = 0.159 mm-1,F（000） = 126,R = 0.0304 and wR = 0.0907.

Synthesis and Crystal Structure of 3,3'-Bis(5-(N-(4-hydroxylphenyl)imidomethyl)- pyrrol-2-yl)pentane·2CH_3OH

3,3＇-Bis（5-（N-（4-hydroxylphenyl）imidomethyl）pyrrol-2-yl）pentane 1 has been synthesized and characterized. The crystal of its methanol complex, 1·（CH3OH）2, belongs to the orthorhombic system, space group Pccn with a = 18.094（2）, b = 11.6890（16）, c = 13.3629（19） , V = 2826.3（7） 3, Z = 8, C14.5H18N2O2, Mr = 252.31, Dc = 1.186 g/cm3, F（000） = 1080 and μ（MoKα） = 0.080 mm-1. The final R = 0.0662 and wR = 0.1801 for 1908 observed reflections with I 2σ（I）, and R = 0.0800 and wR = 0.1948 for all reflections. In the solid state, bridged by included methanol molecules, the molecules of compound 1 form interpenetrated grid structure through N–H···O and O–H···O hydrogen bonds.

Catalytic Kinetic on the Thermal Decomposition of Ammonium Perchlorate with a New Energetic Complex Based on 3,5-Bis(3-pyridyl)-1H-1,2,4-triazole

A new energetic complex,[Co（3,3？-Hbpt）（Htm）]·H_2O（1,3,3？-Hbpt = 3,5-bis（3-pyridyl）-1H-1,2,4-triazole and H_3tm = trimesic acid）,has been synthesized by hydrothermal reactions and characterized by single-crystal X-ray diffraction,elementary analysis,IR spectroscopy,thermogravimetric analysis and X-ray powder diffraction. Single-crystal X-ray diffraction indicates that the complex belongs to triclinic system,space group P 1 with a = 10.0911（1）,b = 10.2573（1）,c = 10.6393（1） ？,α = 103.793（2）,β = 101.041（2）,γ = 107.918（3）o,V = 974.9（2） ？~3,Z = 2,D_c = 1.732 g·cm-3,μ = 0.941 mm^（-1）,M_r = 508.31,F（000） = 518,the final R = 0.0523 and wR = 0.0935 with I 〉 2σ（I）. In the title complex,Co（Ⅱ） ions are connected by Htm2-anions generating 1D ladder-like chains which are linked by 3,3？-Hbpt to form 1D cages. In addition,the thermal decomposition of ammonium perchlorate（AP） with complex 1 was explored by differential scanning calorimetry（DSC）. AP is completely decomposed in a shorter time in the presence of complex 1,and the decomposition heat of the mixture is 2.531 kJ·g^（-1）,significantly higher than that of pure AP. By Kissinger＇s method,the ratio of Ea/ln（A） is 11.05 for the mixture,which indicates that complex 1 shows good catalytic activity toward the AP decomposition.

An efficient synthesis of 2,2-bis(1H-indol-3-yl)-2H-acenaphthen-1-one catalyzed by recyclable solid superacid SO_4^(2-)/TiO_2 under grinding condition

An efficient synthesis of symmetrical 2,2-bis（1H-indol-3-yl）-2H-acenaphthen-1-one is achieved via a reaction of acenaphthe-nequinone and indoles catalyzed by solid superacid SO4^2-/TiO2 under solvent-free conditions at room temperature by grinding, which provides an efficient route to the synthesis of symmetrical 2,2-bis（1H-indol-3-yl）-2H-acenaphthen-1-one.This procedure offers several advantages including solvent-free conditions,excellent yields of products,simple work-up as well as reuse of catalysts which makes it a useful and attractive protocol for the synthesis of these compounds.

Synthesis,Crystal Structure and Theoretical Calculations of a Cadmium Complex Containing 3-Hydroxybenzoic Acid and 1,4-Bis(imidazol-1-yl)-butane

A new complex [Cd（hba）2（bib）]n·nH2O（1,Hhba = 3-hydroxybenzoic acid,bib = 1,4-bis（imidazol-1-yl）-butane） has been hydrothermally synthesized and characterized by elemental analysis,IR spectrum,thermogravimetric analysis,fluorescence spectrum,and singlecrystal X-ray diffraction.Yellow crystal crystallizes in the orthorhombic system,space group Pbca with a = 16.220（5）,b = 14.980（5）,c = 20.521（5） ？,V = 4986（3） ？~3,C（24）H（26）CdN4O7,Mr = 594.89,Dc = 1.585 g/cm^3,μ（Mo Kα） = 0.927 mm^（-1）,F（000） = 2416,Z = 8,the final R = 0.0242 and w R = 0.0589 for 4076 observed reflections（I 〉 2s（I））.In 1,the Cd（Ⅱ） ion takes a six-coordination mode,and bib ligand bridges adjacent Cd（Ⅱ） ions to generate 1D zigzag chains; these neighboring chains are connected by O–H···O hydrogen bonding interactions,producing a 2D folded layered structure.Furthermore,by O–H···O hydrogen bonding between layers and layers,a 3D supramolecular architecture is formed.In addition,we analyzed Natural Bond Orbital（NBO） in using the PBE0/LANL2 DZ method built in Gaussian 03 Program.The calculation results indicated obvious covalent interaction between the coordinated atoms and Cd（Ⅱ） ion.

Synthesis and Crystal Structure of 2,5-Bis(morpholino)-3,4-bis(p-chlorophenyl)thiophene

The title compound 2,5-bis(morpholino)-3,4-bis(p-chlorophenyl) thiophene 2 was obtained by the reaction of -thio-p-chlorobenzoyl thioformmorpholine 1 with trimethyl phosphite in refluxing xylene. The crystal is of triclinic, space group P?with unit cell constants: a = 6.0740(1), b = 10.3250(1), c = 19.779(2) , ?= 76.740(1), = 87.110(1), = 74.920(1), C24H24Cl2N2O2S, Mr = 475.41, Z = 2, V = 1165.7(3) ?, Dc = 1.354 g/cm3, (MoK) = 0.71073, = 0.392 mm-1, F(000) = 496, the final R = 0.0324 and wR = 0.0819 for 3102 observed reflections (I > 2(I)). X-ray analysis reveals that the two morpholinyl groups are located at the -position of thiophene, and the two p-chlorophenyl groups at the -position. Therefore, the title compound is a new symmetric thiophene derivative.

A New Diiminopyridyl Cobalt Complex [CoCl_2L](L=2,6-Bis(N,N'-bis(2,6-diisopropyl-4-(2,3-dimethyoxylbenzoylamide)phenylimino))pyridine)

The reaction of CoCl2·6H2O with 2,6-bis（N,N＇-bis（2,6-diisopropyl-4-（2,3-dimethy-oxyl-benzoylamide）phenylimino））pyridine（L） afforded the complex [CoCl2L],which was fully characterized by elemental analysis,UV-vis,IR spectroscopy,fluorescence,and X-ray diffraction analysis.The compound is of triclinic system,space group P1 with a = 13.058（3）,b = 13.798（3）,c = 16.695（3） ,α = 98.191（3）,β = 102.792（3）,γ = 101.820（3）°,V = 2815.0（9） 3,Z = 2,F（000） = 1122,μ = 0.45 mm-1,R = 0.061 and wR = 0.1349 for 9842 observed reflections（Ⅰ 〉 2σ（Ⅰ））.The Co（Ⅱ） center adopts a distorted square-pyramidal coordination geometry.The extended structure shows a one-dimensional zigzag double chain linked by hydrogen bonds and π-π stacking interactions.

Synthesis of 1,7-Bis(4-hydroxyphenyl)-3-hydroxy-1,3-heptadien-5-one

A facile synthesis of the analog of curcumin. 1,7-bis (4-hydroxyphenyl)-3-hydroxy-1.3-heptadien-5-one 1 was achieved. The key step was completed through the regioselective condensation of ketone 5 and acyl chloride 7.

磁性γ-Bi_2MoO_6/Fe_3O_4复合材料的制备及其光催化性能

采用共沉淀及微波溶剂热法制备出具有核壳结构的磁性γ-Bi2MoO6/Fe3O4复合可见光催化剂。利用X射线衍射(XRD)、透射电子显微镜(TEM)、紫外可见漫反射光谱(UV-Vis)和振动样品磁强计(VSM)等测试手段表征了试样的结构和性能。结果表明:制备的γ-Bi2MoO6/Fe3O4复合材料具有良好的顺磁性,在外加磁场的作用下,可与液相迅速分离。γ-Bi2MoO6包覆在Fe3O4表面形成的核壳结构使催化剂吸收带边红移,在可见光区的吸收增强;以罗丹明B为目标降解物考察了催化剂的可见光催化降解性能。结果显示:磁性γ-Bi2MoO6/Fe3O4的可见光催化活性优于纯γ-Bi2MoO6。当Fe3O4的质量分数为10%时,光催化活性最好,重复使用3次,对罗丹明B的降解率仍能达到85%。

Crystal and Molecular Structure, and Spectral Characteristics of Sodium 3,5-Bis(Hydroxyimino)-1-Methyl-2,4,6-Trioxocyclohexanide

Sodium 3,5-bis(hydroxyimino)-1-methyl-2,4,6-trioxocyclohexanide C7H5N2NaO5 (I) has been isolated as the only product of the reaction of nitrosation of methylphloroglucinol. The structure of the titled compound has been determined from single crystal X-ray diffraction data. The hydrated C7H5N2NaO52.5H2O crystallizes in the monoclinic space group C2/c, with a(?) 16.408(3);b(?) 12.446(3);c(?) 13.716(3);(o) 126.34(3). The planar organic anion exists in a triketo-dihydroxyimino form with the C–O and C–N distances from 1.220(2) to 1.271(2)?? and from 1.292(2) to 1.293?? respectively. In the IR spectrum of I, the sharp absorption band occurred at 1681 cm-1 due to C=O stretching indicating the strong H-interactions. The correlations of theoretical (DFT-B3LYP/aug-cc-pVDZ) and experimental UV-vis absorption spectra in neutral and alkaline ethanolic solutions showed the existence of hydroxyimino-nitroso tautomerism while ionization of I.

Bi_4Si_3O_(12)-Bi_4Ge_3O_(12)赝二元系统析晶行为及其晶体生长

本文采用固相合成方法制备了Bi4(GexSi1-x)3O12(BGSO)固溶体(x=0～0.4),研究了它的固溶特性和析晶行为。实验结果表明,不同组成混合料在900℃左右固相反应能生成BGSO纯相;XRD分析显示,在x=0～0.4区间内,Bi4Si3O12和Bi4Ge3O12可以完全互溶,其晶格常数随x的增加呈线性增长。采用坩埚下降法生长了x=0.15组成的BGSO混晶,获得了透明晶体,并测试了晶体的光学性能。

W^6+掺杂SrBi4Ti4O(15)-Bi4Ti3O(12)共生铋层状压电陶瓷的结构与电学性能

采用固相法制备了SrBi8Ti(7-x)WxO(27)(SBT-BIT-xW^6+,x=0.00,0.02,0.04,0.06,0.08,0.10)共生铋层状压电陶瓷材料,系统研究了W^6+掺杂对陶瓷样品的微观结构、介电、压电及铁电性能的影响。研究发现所有样品均为单一的m=3.5的共生铋层状结构,且所有陶瓷均有较高致密性,烧结效果较好。拉曼结果表明引入W^6+后优化晶体结构,降低了晶格畸变程度。施主掺杂能有效地降低氧空位浓度,使陶瓷样品介电损耗大幅降低,同时显著地增强了样品的铁电性能和压电性能;当掺杂量x=0.08时,样品的压电常数d(33)由11 pC/N提高到24.1 pC/N,剩余极化强度2Pr由3.72 μC/cm~2提至5.54 μC/cm^2,居里温度Tc由595℃降至554℃。并且当退火温度为500℃时,其d(33)仍保持23.2 pC/N,约为初始值的96.3%。表明该材料在高温领域具有潜在应用价值。

Bi_3Ti_4O_(12)/α-Bi_2O_3/TiO_2复合光催化剂的制备及其可见光催化活性研究

以工业二氧化钛(TiO_2)、五水合硝酸铋(Bi(NO_3)_3·5H_2O)为原料制备了Bi_3Ti_4O_(12)/α-Bi_2O_3/TiO_2复合光催化剂。采用X射线衍射(XRD)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、傅里叶变换红外光谱(FTIR)、紫外-可见吸收光谱(UV-Vis)、荧光光谱(PL)等表征方法对光催化剂结构进行分析,表明复合样品中形成了Bi_3Ti_4O_(12)/α-Bi_2O_3/TiO_2异质结结构,其禁带宽度减小、吸收带边红移,光催化效率有明显提高。以亚甲基蓝为目标污染物评价其光催化活性,TiO_2与Bi(NO_3)_3·5H_2O质量比为1∶2.5,煅烧温度为600℃,煅烧时间为5 h时,复合样品光催化活性最佳,在12 W LED灯下,180 min后对浓度为10 mg/L的亚甲基蓝溶液的去除率达96.8%。

SYNTHESIS OF THE RING—AND SIDE—CHAIN—^(14)C—LABELED 1,2—BIS—(4—MORPHOLINOMETHYL—3,5—DIOXOPIPERAZIN—1—YL) PROPANE

The ring-and side-chain-14C-labeled probimane, 1,2-bis （4-morpholinomethy1-3,5-dioxopiperazin-1-yl） propane were synthesized from acetic acid-1-14C in 4 steps and from 14C-formaldehyde in 1 step respectively. The radiochemical yeild for the ring labeling was 28.1%; for the side-chain labeling was 18.5%.

退火温度对Bi_4Ti_3O_(12)_Bi_3TiNbO_9复合薄膜铁电性能的影响

研究了退火工艺对溶胶-凝胶法Bi4Ti3O12_Bi3TiNbO9复合薄膜铁电性能的影响。结果表明,采用溶胶-凝胶工艺制备Bi4Ti3O12_Bi3TiNbO9复合薄膜,可将薄膜的剩余极化值Pr提高到19.8μC/cm2(而Bi4Ti3O12薄膜的Pr只有15μC/cm2);薄膜在650℃退火可获得最佳的铁电性能。