Diimine)nickel {[C 6 H 5 -N = C(CH 3 ) - C(CH 3 ) = N - QH 5 ]NiBr 2 }-TiCl 4 , abbreviated as NiL-TiCl 4 combined catalyst which is supported on MgCl 2 -SiO 2 carrier has been prepared, by using alkyl aluminum (AlR 3...Diimine)nickel {[C 6 H 5 -N = C(CH 3 ) - C(CH 3 ) = N - QH 5 ]NiBr 2 }-TiCl 4 , abbreviated as NiL-TiCl 4 combined catalyst which is supported on MgCl 2 -SiO 2 carrier has been prepared, by using alkyl aluminum (AlR 3 ) as the cocatalyst in place of methylaluminoxane (MAO) to catalyze ethylene oligomerization and copolymerization in situ. The influences of procedure for supporting NiL-TiCl 4 , the molar ratio of NiL to TiCl 4 , cocatalyst type and polymerization temperature on the catalytic performance were studied. The degree of branching and the composition of the branched chain of polymers produced have been investigated by IR and 13C-NMR spectra. The results show that the combined catalyst can synthesize the branched polyethylene with various banched chains .The polymerization reaction was monitored by gas chromatography and mass spectrometry (GC-MS). The results show that this catalyst promotes the oligomerization and copolymerization in situ for ethylene.展开更多
The branching ratios of ions and the angular distributions of electrons ejected from the Eu 4f^76p_（1/2）nd auto-ionizing states are investigated with the velocity-map-imaging technique.To populate the above auto-ion...The branching ratios of ions and the angular distributions of electrons ejected from the Eu 4f^76p_（1/2）nd auto-ionizing states are investigated with the velocity-map-imaging technique.To populate the above auto-ionizing states,the relevant bound Rydberg states have to be detected first.Two new bound Rydberg states are identified in the region between41150 cm^（-1）and 44580 cm^（-1）,from which auto-ionization spectra of the Eu 4f^76p_（1/2）nd states are observed with isolated core excitation method.With all preparations above,the branching ratios from the above auto-ionizing states to different final ionic states and the angular distributions of electrons ejected from these processes are measured systematically.Energy dependence of branching ratios and anisotropy parameters within the auto-ionization spectra are carefully analyzed,followed by a qualitative interpretation.展开更多
A novel tetrafunctional initiator, C [CH_2O (CH_2)_3 OOCCH(Br)CH_3]_4 (1), was synthesized through the reaction oftetraol with α-bromopropionyl chloride, and then was used as initiator of atom transfer radical polyme...A novel tetrafunctional initiator, C [CH_2O (CH_2)_3 OOCCH(Br)CH_3]_4 (1), was synthesized through the reaction oftetraol with α-bromopropionyl chloride, and then was used as initiator of atom transfer radical polymerization (ATRP) in thepreparation of 4-armed polystyrene (PSt) with narrow polydispersity. The structure, molecular weight and molecular weightdistribution (MWD) of each arm were studied by ~1H-NMR and GPC data of hydrolyzed products of the 4-armed PSt. TheATRP of St using 1/CuBr/bpy as initiator system is of 'living' character based on the following evidence: narrow MWD,constant concentration of chain radical during the polymerization, control of molecular weight by the molar ratio of monomerconsumed to 1. The 4-armed poly(St-b-p-nitrophenyl methacrylate) [poly(St-b-NPMA)] was prepared by the ATRP ofNPMA using 4-armed PSt with terminal bromine as the initiator, and characterized by FT-IR, ~1H-NMR spectra and GPCcurves. The micelles with PSt as core, and PNPMA as shell were formed by dropping DMSO into a solution of 4-armedpoly(St-b-NPMA) in DMF, as proved by laser light scatter (LLS) method.展开更多
The microstructure and mechanical properties of TiB_2 /B_4C composites have been investi- gated.It was found that both the strength and hardness for TiB_2 greatly increase with the ad- dition of 20 to 30 wt-% B_4C,and...The microstructure and mechanical properties of TiB_2 /B_4C composites have been investi- gated.It was found that both the strength and hardness for TiB_2 greatly increase with the ad- dition of 20 to 30 wt-% B_4C,and the fracture toughness K_(IC) value remaines on the original high level.The flexure strength,Vicker's hardness and fracture toughness are 782 MPa,26.2 GPa and 7.2 MPam^(1/2),respectively,for the TiB_2-30 wt-% B_4C composite,compared to 450 MPa,21 GPa and 7.0 MPam^(1/2) for monolithic TiB_2.The toughening and strengthening mechanisms,have also been discussed.展开更多
The dynamics of negative surface discharges in c-C_(4)F_(8)/CF_(3)I/CO_(2) gas mixture is investigated here with a 2D fuid model.The distributions of ion concentration,electric field strength and photon flux during th...The dynamics of negative surface discharges in c-C_(4)F_(8)/CF_(3)I/CO_(2) gas mixture is investigated here with a 2D fuid model.The distributions of ion concentration,electric field strength and photon flux during the propagation of the streamer are obtained by solving the drift-diffusion equations of particles and Poisson's equation,and the photon flux variation function during the propagation is also fitted.It is found that the streamer branches occur when the streamer transitions from the upper surface of the insulator to the side surface,and then when the streamer approaches the plane electrode,the photon flux will increase significantly.On this basis,the positive and negative surface discharge models are compared in terms of streamer characteristics,particle characteristics and streamer branches.It is found that the streamer has a higher electron concentration and electric field in the positive model.The streamer develops“floating”in the positive surface discharge,while it is close to the surface of the insulator in the negative model.In addition,the negative streamer branch has a wider width and develops further.展开更多
基金This project was supported by the National Natural Science Foundation of China (No. 29874039) and the Foundation ofGuangdong Province (No. 031598).
文摘Diimine)nickel {[C 6 H 5 -N = C(CH 3 ) - C(CH 3 ) = N - QH 5 ]NiBr 2 }-TiCl 4 , abbreviated as NiL-TiCl 4 combined catalyst which is supported on MgCl 2 -SiO 2 carrier has been prepared, by using alkyl aluminum (AlR 3 ) as the cocatalyst in place of methylaluminoxane (MAO) to catalyze ethylene oligomerization and copolymerization in situ. The influences of procedure for supporting NiL-TiCl 4 , the molar ratio of NiL to TiCl 4 , cocatalyst type and polymerization temperature on the catalytic performance were studied. The degree of branching and the composition of the branched chain of polymers produced have been investigated by IR and 13C-NMR spectra. The results show that the combined catalyst can synthesize the branched polyethylene with various banched chains .The polymerization reaction was monitored by gas chromatography and mass spectrometry (GC-MS). The results show that this catalyst promotes the oligomerization and copolymerization in situ for ethylene.
基金Project supported by the National Natural Science Foundation of China(Grant No.11174218)
文摘The branching ratios of ions and the angular distributions of electrons ejected from the Eu 4f^76p_（1/2）nd auto-ionizing states are investigated with the velocity-map-imaging technique.To populate the above auto-ionizing states,the relevant bound Rydberg states have to be detected first.Two new bound Rydberg states are identified in the region between41150 cm^（-1）and 44580 cm^（-1）,from which auto-ionization spectra of the Eu 4f^76p_（1/2）nd states are observed with isolated core excitation method.With all preparations above,the branching ratios from the above auto-ionizing states to different final ionic states and the angular distributions of electrons ejected from these processes are measured systematically.Energy dependence of branching ratios and anisotropy parameters within the auto-ionization spectra are carefully analyzed,followed by a qualitative interpretation.
基金This work was supported by the National Natural Science Foundation of China (Grant No. 29774027).
文摘A novel tetrafunctional initiator, C [CH_2O (CH_2)_3 OOCCH(Br)CH_3]_4 (1), was synthesized through the reaction oftetraol with α-bromopropionyl chloride, and then was used as initiator of atom transfer radical polymerization (ATRP) in thepreparation of 4-armed polystyrene (PSt) with narrow polydispersity. The structure, molecular weight and molecular weightdistribution (MWD) of each arm were studied by ~1H-NMR and GPC data of hydrolyzed products of the 4-armed PSt. TheATRP of St using 1/CuBr/bpy as initiator system is of 'living' character based on the following evidence: narrow MWD,constant concentration of chain radical during the polymerization, control of molecular weight by the molar ratio of monomerconsumed to 1. The 4-armed poly(St-b-p-nitrophenyl methacrylate) [poly(St-b-NPMA)] was prepared by the ATRP ofNPMA using 4-armed PSt with terminal bromine as the initiator, and characterized by FT-IR, ~1H-NMR spectra and GPCcurves. The micelles with PSt as core, and PNPMA as shell were formed by dropping DMSO into a solution of 4-armedpoly(St-b-NPMA) in DMF, as proved by laser light scatter (LLS) method.
文摘The microstructure and mechanical properties of TiB_2 /B_4C composites have been investi- gated.It was found that both the strength and hardness for TiB_2 greatly increase with the ad- dition of 20 to 30 wt-% B_4C,and the fracture toughness K_(IC) value remaines on the original high level.The flexure strength,Vicker's hardness and fracture toughness are 782 MPa,26.2 GPa and 7.2 MPam^(1/2),respectively,for the TiB_2-30 wt-% B_4C composite,compared to 450 MPa,21 GPa and 7.0 MPam^(1/2) for monolithic TiB_2.The toughening and strengthening mechanisms,have also been discussed.
基金the National Natural Science Foundation of China(No.62075045)。
文摘The dynamics of negative surface discharges in c-C_(4)F_(8)/CF_(3)I/CO_(2) gas mixture is investigated here with a 2D fuid model.The distributions of ion concentration,electric field strength and photon flux during the propagation of the streamer are obtained by solving the drift-diffusion equations of particles and Poisson's equation,and the photon flux variation function during the propagation is also fitted.It is found that the streamer branches occur when the streamer transitions from the upper surface of the insulator to the side surface,and then when the streamer approaches the plane electrode,the photon flux will increase significantly.On this basis,the positive and negative surface discharge models are compared in terms of streamer characteristics,particle characteristics and streamer branches.It is found that the streamer has a higher electron concentration and electric field in the positive model.The streamer develops“floating”in the positive surface discharge,while it is close to the surface of the insulator in the negative model.In addition,the negative streamer branch has a wider width and develops further.
