The Ru3(CO)12/PEDPA complex was firstly applied in the CO selective reduction of 4-propylthio-2-mitroaniline. The effects of reaction temperature, the pressure of CO and concentration of catalyst on the reduction were...The Ru3(CO)12/PEDPA complex was firstly applied in the CO selective reduction of 4-propylthio-2-mitroaniline. The effects of reaction temperature, the pressure of CO and concentration of catalyst on the reduction were investigated. Under the optimum conditions of T=140℃, Pco=5.0MPa and substrate/catalyst = 300 (molar ratio), the conversion and selectivity were 70% and 98%, respectively. After simple phase separation, the catalyst could be recycled.展开更多
A novel and facile method toward a series of yellow water-borne polyurethane was developed by using an intrinsically colored diol in this paper.The yellow aqueous dispersion PCLD-HENA-PU was synthesized based on isoph...A novel and facile method toward a series of yellow water-borne polyurethane was developed by using an intrinsically colored diol in this paper.The yellow aqueous dispersion PCLD-HENA-PU was synthesized based on isophorone diisocyanate(IPDI), polycaprolactonediol(PCLD) and 2,2-dimethylol propionic acid(DMPA) using a yellow diol N,N-bis(2-hydroxyethyl)-4-nitroaniline (HENA) as a chain extender.Due to the complete reaction of OH group in colorant HENA with NCO group in diisocyanate,a series of stable yellow p...展开更多
New mixed ligand chelates synthesized from di-and trivalent metal ions (Cr, Co, Ni, and Cu ions) and Schiff base (L1) resulted from the condensation of 4-dimethylaminobenzaldehyde with 2-aminophenol as primary ligand,...New mixed ligand chelates synthesized from di-and trivalent metal ions (Cr, Co, Ni, and Cu ions) and Schiff base (L1) resulted from the condensation of 4-dimethylaminobenzaldehyde with 2-aminophenol as primary ligand, whereas 2-nitroaniline (L2) represents the secondary ligand in a molar ratio of M:L1:L2 [1:1:1]. The synthesized Schiff base and chelates have been characterized by using several tools, such as, elemental analysis, molar conductivity, magnetic moment measurements, infrared and electronic spectra. The mass spectra of the ligands and Ni(II) chelate were used to justify the process of modification, as well as, the electron paramagnetic resonance spectrum which was carried out for Cu(II) chelate all in order to elucidate the chemical and geometrical structure of the chelates. On the basis of the obtained data, the geometry of the products was proposed for all the chelates.展开更多
文摘The Ru3(CO)12/PEDPA complex was firstly applied in the CO selective reduction of 4-propylthio-2-mitroaniline. The effects of reaction temperature, the pressure of CO and concentration of catalyst on the reduction were investigated. Under the optimum conditions of T=140℃, Pco=5.0MPa and substrate/catalyst = 300 (molar ratio), the conversion and selectivity were 70% and 98%, respectively. After simple phase separation, the catalyst could be recycled.
基金the National Natural Science Foundation of China(No.50273035)
文摘A novel and facile method toward a series of yellow water-borne polyurethane was developed by using an intrinsically colored diol in this paper.The yellow aqueous dispersion PCLD-HENA-PU was synthesized based on isophorone diisocyanate(IPDI), polycaprolactonediol(PCLD) and 2,2-dimethylol propionic acid(DMPA) using a yellow diol N,N-bis(2-hydroxyethyl)-4-nitroaniline (HENA) as a chain extender.Due to the complete reaction of OH group in colorant HENA with NCO group in diisocyanate,a series of stable yellow p...
文摘New mixed ligand chelates synthesized from di-and trivalent metal ions (Cr, Co, Ni, and Cu ions) and Schiff base (L1) resulted from the condensation of 4-dimethylaminobenzaldehyde with 2-aminophenol as primary ligand, whereas 2-nitroaniline (L2) represents the secondary ligand in a molar ratio of M:L1:L2 [1:1:1]. The synthesized Schiff base and chelates have been characterized by using several tools, such as, elemental analysis, molar conductivity, magnetic moment measurements, infrared and electronic spectra. The mass spectra of the ligands and Ni(II) chelate were used to justify the process of modification, as well as, the electron paramagnetic resonance spectrum which was carried out for Cu(II) chelate all in order to elucidate the chemical and geometrical structure of the chelates. On the basis of the obtained data, the geometry of the products was proposed for all the chelates.
