Poly (3, 4-ethylenedioxythiophene) (PEDOT), together with its dopes, such as poly (styrene sulfonate) (PSS), has been acknowledged to have a wide range of biomedical applications as an important conducting pol...Poly (3, 4-ethylenedioxythiophene) (PEDOT), together with its dopes, such as poly (styrene sulfonate) (PSS), has been acknowledged to have a wide range of biomedical applications as an important conducting polymer. In this study, gelatin can be polymerized into PEDOT/PSS polymers on indium tin oxide (ITO)-coated glass. PEDOT/PSS/gelatin layer on ITO-coated glass significantly decreases electrochemical impedance spectroscopy (EIS) and increases charge delivery capacity relative to the gelatin layer and bare ITO- coated glass, comparable to the PEDOT/PSS layer on ITO-coated glass. PEDOT/PSS/gelatin layer on ITO- coated glass enhances pheochromocytoma (PC 12) cell affinity, possesses a high biocompatibility and promotes PC 12 cell growth by delivery of electrical stimulation. These results suggest that gelatin can be incorporated into the PEDOT/PSS polymers through electrochemical polymerization and the PEDOT/PSS/gelatin layer on ITO-coated glass possesses high electrochemical and biological activities.展开更多
Pheniramine maleate (PA), an antihistamine, was determined by Differential Pulse Stripping voltammetry using nano polypyrrole (Ppy) and nano poly(3,4-ethylenedioxythiophene) (PEDOT) modified glassy carbon electrodes. ...Pheniramine maleate (PA), an antihistamine, was determined by Differential Pulse Stripping voltammetry using nano polypyrrole (Ppy) and nano poly(3,4-ethylenedioxythiophene) (PEDOT) modified glassy carbon electrodes. The cyclic voltammetric behavior of pheniramine was studied in aqueous acidic, neutral and alkaline conditions. One well-defined oxidation peak was observed in the cyclic voltammograms at all pHs. The influence of pH, scan rate and concentration revealed irreversible electron transfer and the oxidation was diffusion controlled adsorption. The SEM analysis confirmed good accumulation of PA on the electrode surface. A systematic study of influence of various experimental parameters that affect the stripping voltammetric response was carried out and the maximum peak current conditions were arrived at. Calibration was made under maximum peak current conditions. The range of study was 0.05 to 0.4 μg/mL on Ppy/GCE and 0.025 to 0.4μg/mL on PEDOT/GCE and the lower limit of determination were 0.035μg/mL on Ppy/GCE and 0.016μg/mL on PEDOT/GCE. The suitability of the method for the determination of PA in pharmaceutical preparations and urine samples was also ascertained.展开更多
Composites of Maghnite-H, a Montmorillonite sheet silicate clay, exchanged with protons, and Poly(3,4-ethylenedioxythiophene) (PEDOT) were prepared by in situ chemical polymerization of the 3,4-ethylenedioxythiophene,...Composites of Maghnite-H, a Montmorillonite sheet silicate clay, exchanged with protons, and Poly(3,4-ethylenedioxythiophene) (PEDOT) were prepared by in situ chemical polymerization of the 3,4-ethylenedioxythiophene, without the use of solvent or oxidant. The effect of changing monomer/clay ratio was studied and the resultant composite structures were characterized by Inferred spectroscopy, 27Al and 13CSolid-State NMR spectroscopy, scanning electron microscopy and powder X-ray diffraction. All analyses are consistent with a structure were the polymer is (partially) intercalated into the clay structure, which in favourable cases lead to exfoliation. The presence of the clay in the polymer leads to a desired increase in thermal stability as witnessed by thermogravimetry.展开更多
LiNi0.5Mn1.5O4 (LNMO)/poly(3,4-ethylenedioxythiophene) (PEDOT) composite cathode materials were prepared through in-situ polymerization of thiophene monomer (EDOT), with ammonium persulphate (APS) as oxidizing agent, ...LiNi0.5Mn1.5O4 (LNMO)/poly(3,4-ethylenedioxythiophene) (PEDOT) composite cathode materials were prepared through in-situ polymerization of thiophene monomer (EDOT), with ammonium persulphate (APS) as oxidizing agent, p-toluenesulfonic acid (PTSA) as dopant. The morphology, amount of PEDOT coating, electrochemical properties of LNMO/PEDOT were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and galvanostatic charge and discharge tests. The results show that the composite materials show better cycle performance than bare LNMO.展开更多
In this study, organic solar cells (OSCs) with an active layer, a blend of polymer of non-fullerene (NFA) Y6 as an acceptor, and donor PBDB-T-2F as donor were simulated through the one-dimensional solar capacitance si...In this study, organic solar cells (OSCs) with an active layer, a blend of polymer of non-fullerene (NFA) Y6 as an acceptor, and donor PBDB-T-2F as donor were simulated through the one-dimensional solar capacitance simulator (SCAPS-1D) software to examine the performance of this type of organic polymer thin-film solar cell by varying the thickness of the active layer. PFN-Br interfacial layer entrenched in OPV devices gives overall enhanced open-circuit voltage, short-circuit current density and fill factor thus improving device performance. PEDOT: PSS is an electro-conductive polymer solution that has been extensively utilized in solar cell devices as a hole transport layer (HTL) due to its strong hole affinity, good thermal and mechanical stability, high work function, and high transparency in the visible range. The structure of the organic solar cell is ITO/PEDOT: PSS/BTP-4F: PBDB-T-2F/PFN-Br/Ag. Firstly, the active layer thickness was optimized to 100 nm;after that, the active-layer thickness was varied up to 900 nm. The results of these simulations demonstrated that the active layer thickness improves efficiency significantly up to 500 nm, then it decreased with increasing the thickness of the active layer from 600 nm, also notice that the short circuit current and the fill factor decrease with increasing the active layer from 600 nm, while the open voltage circuit increased with increasing the thickness of the active layer. The optimum thickness is 500 nm.展开更多
A multi-technique approach to prove the preparation of poly(3,4-ethylenedioxythiophene/cucurbit[7]uril)pseudorotaxanes(PEDOT∙CB7-PPs)is reported.Molecular docking simulation and matrix-assisted laser desorption/ioniza...A multi-technique approach to prove the preparation of poly(3,4-ethylenedioxythiophene/cucurbit[7]uril)pseudorotaxanes(PEDOT∙CB7-PPs)is reported.Molecular docking simulation and matrix-assisted laser desorption/ionization mass spectrometry(MALDI MS)validate the complexation ability of the CB7 molecule towards 3,4-ethylenedioxythiophene(EDOT),which leads to the EDOT∙CB7 inclusion complex.Oxidative polymerization of EDOT∙CB7 enabled the synthesis of PEDOT∙CB7-PPs.The water-soluble part of PEDOT∙CB7-PPs was selected,freeze-dried,and chemically characterized.Furthermore,dynamic light scattering(DLS)has been used to study the particle size and z-potential(ZP-ζ)of PEDOT∙CB7-PPs.The ZP-ζvalue(35 mV)evidenced that the PEDOT∙CB7-PPs formed stable water dispersion.By combining the emerging nanopore resistive pulse sensing technique(Np-RPS)and computational modeling,we identified strong interactions of PEDOT∙CB7-PPs with the aerolysin(Ael)nanopore.PEDOT∙CB7-PPs behave as positive charged species,and thus trans negative bias promotes its interactions with the Ael nanopore.The computational modeling results are fully consistent with the Np-RPS detection,which also reveals strong interactions between PEDOT∙CB7-PPs and the Ael nanopore.With this study,we hope to provide new insights and a better understanding of the interactions between supramolecular complexes based on CB7 and biological entities,which is instrumental for future applications in the field of nanobiotechnology.展开更多
Platinum (Pt) implants coated with poly (3, 4-ethylenedioxythiophene)/carbon nanotube (PEDOT/CNT) composite films were implanted into the brain of rats, and the brain response was evaluated 6 weeks after the imp...Platinum (Pt) implants coated with poly (3, 4-ethylenedioxythiophene)/carbon nanotube (PEDOT/CNT) composite films were implanted into the brain of rats, and the brain response was evaluated 6 weeks after the implantation. The surface morphology of Pt implants with and without the PEDOT/CNT coating was studied using scanning electron microscopy (SEM). After 6 weeks post-implantation, the expression of laminin (vascular endothelial marker) and neuronal nuclei (NeuN, neuronal marker) were evaluated by immnohistochemistry. It is revealed that the obvious improvements of the surface density of blood vessels and neurons aound the Pt implants with the coating, which were evidenced by laminin and NeuN staining in the zone within the distance of 150 μm to the implant interface. These results suggest the PEDOT/CNT composite films can improve the biocompatibility of the Pt electrodes while it is implanted in brain.展开更多
An arachidic acid/poly (3, 4-ethylene dioxythiophene) (AA/PEDOT) multilayer Langmuir-Blodgett (LB) film was prepared by a modified LB film method. The theories were utilized to explain the effects between HCl mo...An arachidic acid/poly (3, 4-ethylene dioxythiophene) (AA/PEDOT) multilayer Langmuir-Blodgett (LB) film was prepared by a modified LB film method. The theories were utilized to explain the effects between HCl molecule and LB film. The gas sensitivity mechanism of poly (3, 4-ethylene dioxythiophene) (PEDOT) multilayer film can be explained by the charge transfer between p system of PEDOT and oxidization HCl system. The gas sensitivity of PEDOT LB film deposited interdigital electrode to HCl was tested. The results showed that film thickness, treating temperature, deposition speed had different influence on film gas sensitivity. The AA/PEDOT film deposited device exhibited nonlinear behavior to HCl gas at lower concentration (20-60 ppm) and linear response behavior at higher gas concentration was observed. The time of the compound LB film of the AA/PEDOT responding to the 30 ppm HCl gas is about 20 seconds, which is far quicker than the time of the film to the PEDOTPRESS film(about 80 seconds). It is not higher film press to better film. When the film press attains 45 mNs/m, the sensitivity of the AA/PEDOT film on the contrary descends.展开更多
An increase of work function (0.3 eV) is achieved by irradiating poly(3,4-ethylenedioxythiophene):poly(styrene sul- fonate) (PEDOT:PSS) film in vacuum with 254-nm ultraviolet (UV) light. The mechanism for ...An increase of work function (0.3 eV) is achieved by irradiating poly(3,4-ethylenedioxythiophene):poly(styrene sul- fonate) (PEDOT:PSS) film in vacuum with 254-nm ultraviolet (UV) light. The mechanism for such an improvement is investigated by photoelectron yield spectroscopy, X-ray photo electron energy spectrum, and field emission technique. Sur- face oxidation and composition change are found as the reasons for work function increase. The UV-treated PEDOT:PSS film is used as the hole injection layer in a hole-only device. Hole injection is improved by UV-treated PEDOT:PSS film without baring the enlargement of film resistance. Our result demonstrates that UV treatment is more suitable for modifying the injection barrier than UV ozone exposure.展开更多
Based on the study of a new type of conducting polymer poly (3,4-ethylenedioxythiophene) (PEDOT),we focussed on the preparation and characteristics of PEDOT nanoparticles made by reversed micelle method.Moreover,w...Based on the study of a new type of conducting polymer poly (3,4-ethylenedioxythiophene) (PEDOT),we focussed on the preparation and characteristics of PEDOT nanoparticles made by reversed micelle method.Moreover,we deeply investigated the optical,electrical and the thermal stability of PEDOT nanoparticles.The main results are as follows: the small-sized PEDOT nanoparticles were prepared and utilized by different methods,such as ultraviolet/visible (UV-Vis) spectroscopy,Fourier-transform infrared (FT- IR) spectrum,scanning electron microscopy(SEM) and so on.The results show that the amount of oxidizer,ultrasonic treatment,polymerizing temperature and doping degree can influent morphology,electrical ability and gas sensitivity of PEDOT nanoparticles.The Bragg peaks of nanoparticles at 6.7°,12.7°,25° were observed by XRD and the better orientation of molecular chain was attributed to the effective doping of toluene-p-sulfonic acid,which also resulted in an enhancement of thermal stability of nanoparticles than conventional PEDOT.展开更多
基金Funded by National Natural Science Foundation of China(Nos.11179015,51173108)Innovation Program of Shanghai Municipal Education Commission(No.12ZZ143)
文摘Poly (3, 4-ethylenedioxythiophene) (PEDOT), together with its dopes, such as poly (styrene sulfonate) (PSS), has been acknowledged to have a wide range of biomedical applications as an important conducting polymer. In this study, gelatin can be polymerized into PEDOT/PSS polymers on indium tin oxide (ITO)-coated glass. PEDOT/PSS/gelatin layer on ITO-coated glass significantly decreases electrochemical impedance spectroscopy (EIS) and increases charge delivery capacity relative to the gelatin layer and bare ITO- coated glass, comparable to the PEDOT/PSS layer on ITO-coated glass. PEDOT/PSS/gelatin layer on ITO- coated glass enhances pheochromocytoma (PC 12) cell affinity, possesses a high biocompatibility and promotes PC 12 cell growth by delivery of electrical stimulation. These results suggest that gelatin can be incorporated into the PEDOT/PSS polymers through electrochemical polymerization and the PEDOT/PSS/gelatin layer on ITO-coated glass possesses high electrochemical and biological activities.
文摘Pheniramine maleate (PA), an antihistamine, was determined by Differential Pulse Stripping voltammetry using nano polypyrrole (Ppy) and nano poly(3,4-ethylenedioxythiophene) (PEDOT) modified glassy carbon electrodes. The cyclic voltammetric behavior of pheniramine was studied in aqueous acidic, neutral and alkaline conditions. One well-defined oxidation peak was observed in the cyclic voltammograms at all pHs. The influence of pH, scan rate and concentration revealed irreversible electron transfer and the oxidation was diffusion controlled adsorption. The SEM analysis confirmed good accumulation of PA on the electrode surface. A systematic study of influence of various experimental parameters that affect the stripping voltammetric response was carried out and the maximum peak current conditions were arrived at. Calibration was made under maximum peak current conditions. The range of study was 0.05 to 0.4 μg/mL on Ppy/GCE and 0.025 to 0.4μg/mL on PEDOT/GCE and the lower limit of determination were 0.035μg/mL on Ppy/GCE and 0.016μg/mL on PEDOT/GCE. The suitability of the method for the determination of PA in pharmaceutical preparations and urine samples was also ascertained.
文摘Composites of Maghnite-H, a Montmorillonite sheet silicate clay, exchanged with protons, and Poly(3,4-ethylenedioxythiophene) (PEDOT) were prepared by in situ chemical polymerization of the 3,4-ethylenedioxythiophene, without the use of solvent or oxidant. The effect of changing monomer/clay ratio was studied and the resultant composite structures were characterized by Inferred spectroscopy, 27Al and 13CSolid-State NMR spectroscopy, scanning electron microscopy and powder X-ray diffraction. All analyses are consistent with a structure were the polymer is (partially) intercalated into the clay structure, which in favourable cases lead to exfoliation. The presence of the clay in the polymer leads to a desired increase in thermal stability as witnessed by thermogravimetry.
文摘LiNi0.5Mn1.5O4 (LNMO)/poly(3,4-ethylenedioxythiophene) (PEDOT) composite cathode materials were prepared through in-situ polymerization of thiophene monomer (EDOT), with ammonium persulphate (APS) as oxidizing agent, p-toluenesulfonic acid (PTSA) as dopant. The morphology, amount of PEDOT coating, electrochemical properties of LNMO/PEDOT were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and galvanostatic charge and discharge tests. The results show that the composite materials show better cycle performance than bare LNMO.
文摘In this study, organic solar cells (OSCs) with an active layer, a blend of polymer of non-fullerene (NFA) Y6 as an acceptor, and donor PBDB-T-2F as donor were simulated through the one-dimensional solar capacitance simulator (SCAPS-1D) software to examine the performance of this type of organic polymer thin-film solar cell by varying the thickness of the active layer. PFN-Br interfacial layer entrenched in OPV devices gives overall enhanced open-circuit voltage, short-circuit current density and fill factor thus improving device performance. PEDOT: PSS is an electro-conductive polymer solution that has been extensively utilized in solar cell devices as a hole transport layer (HTL) due to its strong hole affinity, good thermal and mechanical stability, high work function, and high transparency in the visible range. The structure of the organic solar cell is ITO/PEDOT: PSS/BTP-4F: PBDB-T-2F/PFN-Br/Ag. Firstly, the active layer thickness was optimized to 100 nm;after that, the active-layer thickness was varied up to 900 nm. The results of these simulations demonstrated that the active layer thickness improves efficiency significantly up to 500 nm, then it decreased with increasing the thickness of the active layer from 600 nm, also notice that the short circuit current and the fill factor decrease with increasing the active layer from 600 nm, while the open voltage circuit increased with increasing the thickness of the active layer. The optimum thickness is 500 nm.
基金supported by a grant of the Ministry of Research,Innovation and Digitization,CNCS–UEFISCDI,project number PN-III-P4-PCE-2021-0906within PNCDI III and the Institute desÉtudes Avancées(IEA)of Cergy-Pontoise University(Project INEX“Pi-ROT”#73).
文摘A multi-technique approach to prove the preparation of poly(3,4-ethylenedioxythiophene/cucurbit[7]uril)pseudorotaxanes(PEDOT∙CB7-PPs)is reported.Molecular docking simulation and matrix-assisted laser desorption/ionization mass spectrometry(MALDI MS)validate the complexation ability of the CB7 molecule towards 3,4-ethylenedioxythiophene(EDOT),which leads to the EDOT∙CB7 inclusion complex.Oxidative polymerization of EDOT∙CB7 enabled the synthesis of PEDOT∙CB7-PPs.The water-soluble part of PEDOT∙CB7-PPs was selected,freeze-dried,and chemically characterized.Furthermore,dynamic light scattering(DLS)has been used to study the particle size and z-potential(ZP-ζ)of PEDOT∙CB7-PPs.The ZP-ζvalue(35 mV)evidenced that the PEDOT∙CB7-PPs formed stable water dispersion.By combining the emerging nanopore resistive pulse sensing technique(Np-RPS)and computational modeling,we identified strong interactions of PEDOT∙CB7-PPs with the aerolysin(Ael)nanopore.PEDOT∙CB7-PPs behave as positive charged species,and thus trans negative bias promotes its interactions with the Ael nanopore.The computational modeling results are fully consistent with the Np-RPS detection,which also reveals strong interactions between PEDOT∙CB7-PPs and the Ael nanopore.With this study,we hope to provide new insights and a better understanding of the interactions between supramolecular complexes based on CB7 and biological entities,which is instrumental for future applications in the field of nanobiotechnology.
基金Funded by the High Tech Research and Development ("863") Program of China (2006AA02Z4E6)the National Natural Science Foundation of China (Nos. 21073136, 81271364)
文摘Platinum (Pt) implants coated with poly (3, 4-ethylenedioxythiophene)/carbon nanotube (PEDOT/CNT) composite films were implanted into the brain of rats, and the brain response was evaluated 6 weeks after the implantation. The surface morphology of Pt implants with and without the PEDOT/CNT coating was studied using scanning electron microscopy (SEM). After 6 weeks post-implantation, the expression of laminin (vascular endothelial marker) and neuronal nuclei (NeuN, neuronal marker) were evaluated by immnohistochemistry. It is revealed that the obvious improvements of the surface density of blood vessels and neurons aound the Pt implants with the coating, which were evidenced by laminin and NeuN staining in the zone within the distance of 150 μm to the implant interface. These results suggest the PEDOT/CNT composite films can improve the biocompatibility of the Pt electrodes while it is implanted in brain.
基金Funded by the National Natural Science Foundation of China (No.60372002)
文摘An arachidic acid/poly (3, 4-ethylene dioxythiophene) (AA/PEDOT) multilayer Langmuir-Blodgett (LB) film was prepared by a modified LB film method. The theories were utilized to explain the effects between HCl molecule and LB film. The gas sensitivity mechanism of poly (3, 4-ethylene dioxythiophene) (PEDOT) multilayer film can be explained by the charge transfer between p system of PEDOT and oxidization HCl system. The gas sensitivity of PEDOT LB film deposited interdigital electrode to HCl was tested. The results showed that film thickness, treating temperature, deposition speed had different influence on film gas sensitivity. The AA/PEDOT film deposited device exhibited nonlinear behavior to HCl gas at lower concentration (20-60 ppm) and linear response behavior at higher gas concentration was observed. The time of the compound LB film of the AA/PEDOT responding to the 30 ppm HCl gas is about 20 seconds, which is far quicker than the time of the film to the PEDOTPRESS film(about 80 seconds). It is not higher film press to better film. When the film press attains 45 mNs/m, the sensitivity of the AA/PEDOT film on the contrary descends.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61076057,61376059,61171023,and 91221202,)the National Basic Research Program of China(Grant Nos.2012CB932701 and 2011CB933001)
文摘An increase of work function (0.3 eV) is achieved by irradiating poly(3,4-ethylenedioxythiophene):poly(styrene sul- fonate) (PEDOT:PSS) film in vacuum with 254-nm ultraviolet (UV) light. The mechanism for such an improvement is investigated by photoelectron yield spectroscopy, X-ray photo electron energy spectrum, and field emission technique. Sur- face oxidation and composition change are found as the reasons for work function increase. The UV-treated PEDOT:PSS film is used as the hole injection layer in a hole-only device. Hole injection is improved by UV-treated PEDOT:PSS film without baring the enlargement of film resistance. Our result demonstrates that UV treatment is more suitable for modifying the injection barrier than UV ozone exposure.
基金Funded by the National Natural Science Foundation of China (No. 60372002)
文摘Based on the study of a new type of conducting polymer poly (3,4-ethylenedioxythiophene) (PEDOT),we focussed on the preparation and characteristics of PEDOT nanoparticles made by reversed micelle method.Moreover,we deeply investigated the optical,electrical and the thermal stability of PEDOT nanoparticles.The main results are as follows: the small-sized PEDOT nanoparticles were prepared and utilized by different methods,such as ultraviolet/visible (UV-Vis) spectroscopy,Fourier-transform infrared (FT- IR) spectrum,scanning electron microscopy(SEM) and so on.The results show that the amount of oxidizer,ultrasonic treatment,polymerizing temperature and doping degree can influent morphology,electrical ability and gas sensitivity of PEDOT nanoparticles.The Bragg peaks of nanoparticles at 6.7°,12.7°,25° were observed by XRD and the better orientation of molecular chain was attributed to the effective doping of toluene-p-sulfonic acid,which also resulted in an enhancement of thermal stability of nanoparticles than conventional PEDOT.