A high current RFQ （radio frequency quadrupole） is being studied at the Institute of Modern Physics, CAS for the direct plasma injection scheme. Shunt impedance is an important parameter when designing a ＆rod RFQ c...A high current RFQ （radio frequency quadrupole） is being studied at the Institute of Modern Physics, CAS for the direct plasma injection scheme. Shunt impedance is an important parameter when designing a ＆rod RFQ cavity, it reflects the RF efficiency of the cavity, and has a direct influence on the cost of the structure. Voltage distribution of a RFQ cavity has an effect on beam transmission, and particles would be lost if the actual voltage distribution is not as what it should be. The influence of cell length, stem thickness and height on shunt impedance and voltage distribution have been studied, in particular the effect of projecting electrodes has been investigated in detail.展开更多
A series of(Y_(1-y), Gdy)_(0.95-x)(P_y, V_(1-y))O_4 :0.05Eu^(3+), xBi^(3+)+phosphors have been successfully prepared by a subsection method. The crystal structure, surface morphology and luminescence properties were i...A series of(Y_(1-y), Gdy)_(0.95-x)(P_y, V_(1-y))O_4 :0.05Eu^(3+), xBi^(3+)+phosphors have been successfully prepared by a subsection method. The crystal structure, surface morphology and luminescence properties were investigated. It was found that the sintered samples crystallized in a tetragonal crystal system with space group I_(41)/amd(a = b = 0.7119 nm, c = 0.6290 nm). The products presented rod-like morphology with length of 100-150 nm and width of 50-100 nm. A maximum peak at 619 nm(~5D_0 →~7F_2) was observed in emission spectrum of the phosphors. It was also found that co-doping of Bi^(3+)+, P5+and Gd^(3+)ions into YVO_4:Eu^(3+)can not only made the right edge of the excitation band shift to the long-wavelength region, but also increased the emission intensity at 619 nm sharply and decreased the lifetime of fluorescence decay. These results may expand the application scope of the phosphors.展开更多
A new heat-resistant, soluble polymer, poly(phenyl-1,2,4-triazine imide), has been prepared via a two-step method of polycondensation of N,N'-bis(4-benzil)pyromellitimide and terephthalamidrazone in cresol, follow...A new heat-resistant, soluble polymer, poly(phenyl-1,2,4-triazine imide), has been prepared via a two-step method of polycondensation of N,N'-bis(4-benzil)pyromellitimide and terephthalamidrazone in cresol, followed by curing at higher temperature. The rigid 1,2,4-triazine group increases the solubility of the polyimide so that the polymer is soluble in cresol, N-methyl-2-pyrrolidone (NMP), trifluoroacetic acid and concentrated sulfuric acid, etc. Thermogravimetric analysis (TGA) indicates that this novel polyimide has good thermal stability with a high decomposition temperature of 447degreesC in air and of 423 degreesC in N-2, It has a tensile strength of 107.4 MI'a with an elongation at break of around 7.6%.展开更多
A high current radio frequency quadrupole (RFQ) is being studied at the Institute of Modern Physics, Chinese Academy of Sciences (IMP, CAS) for the direct plasma injection scheme (DPIS). Because of the strong space ch...A high current radio frequency quadrupole (RFQ) is being studied at the Institute of Modern Physics, Chinese Academy of Sciences (IMP, CAS) for the direct plasma injection scheme (DPIS). Because of the strong space charge of beams from laser ion source, the beam dynamics design of the RFQ has been carried out with a new code, which can deal with space charge effectively. The design of the RFQ structure is performed with an electromagnetic simulation code and the determination of parameters of the structure has been done to maximize the shunt impedance when the frequency is kept fixed. The influences of dipole mode effect and flatness on beams were also discussed.展开更多
文摘A high current RFQ （radio frequency quadrupole） is being studied at the Institute of Modern Physics, CAS for the direct plasma injection scheme. Shunt impedance is an important parameter when designing a ＆rod RFQ cavity, it reflects the RF efficiency of the cavity, and has a direct influence on the cost of the structure. Voltage distribution of a RFQ cavity has an effect on beam transmission, and particles would be lost if the actual voltage distribution is not as what it should be. The influence of cell length, stem thickness and height on shunt impedance and voltage distribution have been studied, in particular the effect of projecting electrodes has been investigated in detail.
基金supported by the Program for New Material Development & Application innovative Research Team of Higher Education in Chong Qing of China (Grant No. 201042)
文摘A series of(Y_(1-y), Gdy)_(0.95-x)(P_y, V_(1-y))O_4 :0.05Eu^(3+), xBi^(3+)+phosphors have been successfully prepared by a subsection method. The crystal structure, surface morphology and luminescence properties were investigated. It was found that the sintered samples crystallized in a tetragonal crystal system with space group I_(41)/amd(a = b = 0.7119 nm, c = 0.6290 nm). The products presented rod-like morphology with length of 100-150 nm and width of 50-100 nm. A maximum peak at 619 nm(~5D_0 →~7F_2) was observed in emission spectrum of the phosphors. It was also found that co-doping of Bi^(3+)+, P5+and Gd^(3+)ions into YVO_4:Eu^(3+)can not only made the right edge of the excitation band shift to the long-wavelength region, but also increased the emission intensity at 619 nm sharply and decreased the lifetime of fluorescence decay. These results may expand the application scope of the phosphors.
基金This project was supported by the National Natural Science Foundation of China (Grant No. 29773024).
文摘A new heat-resistant, soluble polymer, poly(phenyl-1,2,4-triazine imide), has been prepared via a two-step method of polycondensation of N,N'-bis(4-benzil)pyromellitimide and terephthalamidrazone in cresol, followed by curing at higher temperature. The rigid 1,2,4-triazine group increases the solubility of the polyimide so that the polymer is soluble in cresol, N-methyl-2-pyrrolidone (NMP), trifluoroacetic acid and concentrated sulfuric acid, etc. Thermogravimetric analysis (TGA) indicates that this novel polyimide has good thermal stability with a high decomposition temperature of 447degreesC in air and of 423 degreesC in N-2, It has a tensile strength of 107.4 MI'a with an elongation at break of around 7.6%.
文摘A high current radio frequency quadrupole (RFQ) is being studied at the Institute of Modern Physics, Chinese Academy of Sciences (IMP, CAS) for the direct plasma injection scheme (DPIS). Because of the strong space charge of beams from laser ion source, the beam dynamics design of the RFQ has been carried out with a new code, which can deal with space charge effectively. The design of the RFQ structure is performed with an electromagnetic simulation code and the determination of parameters of the structure has been done to maximize the shunt impedance when the frequency is kept fixed. The influences of dipole mode effect and flatness on beams were also discussed.
