Geometry optimization of p-C_(6)H_(4)-connected cyclo[20]carbon(p-C_(6)H_(4)-C_(20))was carried out at M062X/6-311G(d,p)level,three kinds of bond orders(Mayer,Laplacian,and Wiberg),electron-hole distributions,localize...Geometry optimization of p-C_(6)H_(4)-connected cyclo[20]carbon(p-C_(6)H_(4)-C_(20))was carried out at M062X/6-311G(d,p)level,three kinds of bond orders(Mayer,Laplacian,and Wiberg),electron-hole distributions,localized orbital locators(LOL),and infrared(IR)spectrum were also performed at the same level.Based on TD-DFT M062X/6-311G(d,p)method,the first 20 excited states and ultraviolet(UV)spectra of p-C_(6)H_(4)-C_(20) were calculated.Calculation results of π-electron delocalization analyses prove thatπ-electron delocalization of p-C_(6)H_(4)-C_(20) is more likely to occur on shorter C-C bonds rather than longer C-C bonds,and inside/outside of the ring plane rather than above/below the ring plane.Two absorption peaks of p-C_(6)H_(4)-C_(20) locate at about 319 nm and 236 nm,respectively.展开更多
Mechanisms regulating neurogenesis involve broad and complex processes that represent intriguing therapeutic targets in the field of regenerative medicine.One influential factor guiding neural stem cell proliferation ...Mechanisms regulating neurogenesis involve broad and complex processes that represent intriguing therapeutic targets in the field of regenerative medicine.One influential factor guiding neural stem cell proliferation and cellular differentiation during neurogenesis are epigenetic mechanisms.We present an overview of epigenetic mechanisms including chromatin structure and histone modifications;and discuss novel roles of two histone modifiers,Ezh2 and Suv4-20h1/Suv4-20h2(collectively referred to as Suv4-20h),in neurodevelopment and neurogenesis.This review will focus on broadly reviewing epigenetic regulatory components,the roles of epigenetic components during neurogenesis,and potential applications in regenerative medicine.展开更多
Instrument calibration is vital to a successful control system because signal inputs to the system controllers come from such instruments. This paper presents a method for actualizing a standard low-cost loop calibrat...Instrument calibration is vital to a successful control system because signal inputs to the system controllers come from such instruments. This paper presents a method for actualizing a standard low-cost loop calibrator for the famous 4-20 mA electrical signaling scheme. The loop calibrator generates a linear current signal from 4 to 20 mA over a 250 ? typical process instrument load for calibration. The realization of the loop calibrator relies on a voltage-to-current converter to build a constant current source. The voltage controlled constant current source is built from discrete components and an op-amp to keep the cost low. Results from simulations and the prototype demonstrate the performance of the 4-20 mA loop calibrator which utilizes a greatly reduced number of components. The cost of these components is approximately 34% of the least expensive calibrator sampled, though other production costs are not included. This conclusion reinforces the fact that loop calibrators can be cheaper.展开更多
Five mobile digital seismic stations were set up by the Earthquake Administration of Yunnan Province near the epicenter of the main shock after the Ning＇er M6. 4 earthquake on June 3, 2007. In this paper, the aftersh...Five mobile digital seismic stations were set up by the Earthquake Administration of Yunnan Province near the epicenter of the main shock after the Ning＇er M6. 4 earthquake on June 3, 2007. In this paper, the aftershock sequence of the Ning＇er M6. 4 earthquake is relocated by using the double difference earthquake location method. The data is from the 5 mobile digital seismic stations and the permanent Simao seismic station. The results show that the length of the aftershock sequence is 40kin and the width is 30km, concentrated obviously at the lateral displacement area between the Pu＇er fault and the NNE-trending faults, with the majority occurring on the Pu＇er fault around the main shock. The depths of aftershocks are from 2kin to 12km, and the predominant distribution is in the depth of 8 ~ 10km. The mean depth is 7. 9kin. The seismic fault dips to the northwest revealed from the profile parallel to this aftershock sequence, which is identical to the dip of the secondary fault of the NE-trending Menglian-Mojiang fault in the earthquake area. There are more earthquakes concentrated in the northwest segment than in the southeast segment, which is perhaps related to the underground medium and faults. The depth profile of the earthquake sequence shows that the relocated earthquakes are mainly located near the Pu＇er fault and the seismic faults dip to the southwest, consistent with the dip of the west branch of the Pu＇er fault. In all, the fault strike revealed by earthquake relocations matches well with the strike in the focal mechanism solutions. The main shock is in the top of the aftershock sequence and the aftershocks are symmetrically distributed, showing that faulting was complete in both the NE and SW directions.展开更多
In this paper,the seismogenic structures of the Da Qaidam strong earthquakes are preliminarily discussed by using the regional seismotectonic data and focal mechanism solutions. Analysis is done on the temporal and sp...In this paper,the seismogenic structures of the Da Qaidam strong earthquakes are preliminarily discussed by using the regional seismotectonic data and focal mechanism solutions. Analysis is done on the temporal and spatial distribution characteristics of the two strong earthquake sequences in Da Qaidam in combination with the sequence distribution characteristics of the M6. 6 earthquake of 2003 and the five strong earthquakes of about M5. 0 in 2004 in Delingha. At the same time,the regional characteristics of the historical seismic activity are also investigated. Preliminary analysis is done on the influence of the two M8. 0 earthquakes in the past 10 years on this region. Precursory anomalies and their characteristics are discussed in combination with the analysis of the precursor observation data of Qinghai Province.展开更多
文摘Geometry optimization of p-C_(6)H_(4)-connected cyclo[20]carbon(p-C_(6)H_(4)-C_(20))was carried out at M062X/6-311G(d,p)level,three kinds of bond orders(Mayer,Laplacian,and Wiberg),electron-hole distributions,localized orbital locators(LOL),and infrared(IR)spectrum were also performed at the same level.Based on TD-DFT M062X/6-311G(d,p)method,the first 20 excited states and ultraviolet(UV)spectra of p-C_(6)H_(4)-C_(20) were calculated.Calculation results of π-electron delocalization analyses prove thatπ-electron delocalization of p-C_(6)H_(4)-C_(20) is more likely to occur on shorter C-C bonds rather than longer C-C bonds,and inside/outside of the ring plane rather than above/below the ring plane.Two absorption peaks of p-C_(6)H_(4)-C_(20) locate at about 319 nm and 236 nm,respectively.
文摘Mechanisms regulating neurogenesis involve broad and complex processes that represent intriguing therapeutic targets in the field of regenerative medicine.One influential factor guiding neural stem cell proliferation and cellular differentiation during neurogenesis are epigenetic mechanisms.We present an overview of epigenetic mechanisms including chromatin structure and histone modifications;and discuss novel roles of two histone modifiers,Ezh2 and Suv4-20h1/Suv4-20h2(collectively referred to as Suv4-20h),in neurodevelopment and neurogenesis.This review will focus on broadly reviewing epigenetic regulatory components,the roles of epigenetic components during neurogenesis,and potential applications in regenerative medicine.
文摘Instrument calibration is vital to a successful control system because signal inputs to the system controllers come from such instruments. This paper presents a method for actualizing a standard low-cost loop calibrator for the famous 4-20 mA electrical signaling scheme. The loop calibrator generates a linear current signal from 4 to 20 mA over a 250 ? typical process instrument load for calibration. The realization of the loop calibrator relies on a voltage-to-current converter to build a constant current source. The voltage controlled constant current source is built from discrete components and an op-amp to keep the cost low. Results from simulations and the prototype demonstrate the performance of the 4-20 mA loop calibrator which utilizes a greatly reduced number of components. The cost of these components is approximately 34% of the least expensive calibrator sampled, though other production costs are not included. This conclusion reinforces the fact that loop calibrators can be cheaper.
基金sponsored by the Joint Earthquake Science Foundation,China (200804)
文摘Five mobile digital seismic stations were set up by the Earthquake Administration of Yunnan Province near the epicenter of the main shock after the Ning＇er M6. 4 earthquake on June 3, 2007. In this paper, the aftershock sequence of the Ning＇er M6. 4 earthquake is relocated by using the double difference earthquake location method. The data is from the 5 mobile digital seismic stations and the permanent Simao seismic station. The results show that the length of the aftershock sequence is 40kin and the width is 30km, concentrated obviously at the lateral displacement area between the Pu＇er fault and the NNE-trending faults, with the majority occurring on the Pu＇er fault around the main shock. The depths of aftershocks are from 2kin to 12km, and the predominant distribution is in the depth of 8 ~ 10km. The mean depth is 7. 9kin. The seismic fault dips to the northwest revealed from the profile parallel to this aftershock sequence, which is identical to the dip of the secondary fault of the NE-trending Menglian-Mojiang fault in the earthquake area. There are more earthquakes concentrated in the northwest segment than in the southeast segment, which is perhaps related to the underground medium and faults. The depth profile of the earthquake sequence shows that the relocated earthquakes are mainly located near the Pu＇er fault and the seismic faults dip to the southwest, consistent with the dip of the west branch of the Pu＇er fault. In all, the fault strike revealed by earthquake relocations matches well with the strike in the focal mechanism solutions. The main shock is in the top of the aftershock sequence and the aftershocks are symmetrically distributed, showing that faulting was complete in both the NE and SW directions.
基金funded by the project of "Intensive Monitoring and Tracking Studies in the Key Seismic Risk Regions of China in 2011 " of China Earthquake Administration( 2011016301)the‘Comprehensive study of Delingha and Da Qaidam Strong Earthquake Swarms ( 2009A01)of the Earthquake Science Foundation of Qinghai Province,China
文摘In this paper,the seismogenic structures of the Da Qaidam strong earthquakes are preliminarily discussed by using the regional seismotectonic data and focal mechanism solutions. Analysis is done on the temporal and spatial distribution characteristics of the two strong earthquake sequences in Da Qaidam in combination with the sequence distribution characteristics of the M6. 6 earthquake of 2003 and the five strong earthquakes of about M5. 0 in 2004 in Delingha. At the same time,the regional characteristics of the historical seismic activity are also investigated. Preliminary analysis is done on the influence of the two M8. 0 earthquakes in the past 10 years on this region. Precursory anomalies and their characteristics are discussed in combination with the analysis of the precursor observation data of Qinghai Province.
