Dynamic recrystallization （DRX） behaviors of a heat-resistant martensitic stainless steel 403Nb during hot deformation have been investigated by single-pass thermo-mechanical simulative experiment at temperatures of...Dynamic recrystallization （DRX） behaviors of a heat-resistant martensitic stainless steel 403Nb during hot deformation have been investigated by single-pass thermo-mechanical simulative experiment at temperatures of 900-1150℃ and strain rates of 0.01-1 s-1 The results show that the true stress-true strain curves of this alloy can be classified into two types, one is of dynamic recovery and the other is of dynamic recrystallization. The DRX in 403Nb alloy is easy to occur at strain rates lower than 0.5 s-1 and deformation temperatures higher than 1000℃. Using regression analysis, the stress multiplier （a） and apparent stress exponent （n） were calculated to be 0.0153 and 3.22, respectively, while the activation energy （Qd） for DRX of 403Nb was calculated to be 367.293 kJ/mol. The constitutive equation of peak stress for DRX was also obtained. Based on P-J method, the critical strain for DRX was accurately determined. The mathematical models of peak strain and kinetic equation for DRX of 403Nb steel were finally established.展开更多
A static recrystallization behavior between the roiling passes of a martensitic heatresistant stainless steel 403Nb has been studied by OM, TEM and double-hit thermomechanical simulator to explore the effects of defor...A static recrystallization behavior between the roiling passes of a martensitic heatresistant stainless steel 403Nb has been studied by OM, TEM and double-hit thermomechanical simulator to explore the effects of deformation temperature, strain rate, strain and the prior austenite grain size. The results show that increases of deformation temperature and strain rate and strain can promote the static recrystallization of 403Nb steel. Static recrystallization also proceeds faster when the prior austenite grain size is smaller. Microstructural observation indicates that the volume fraction of static recrystallization increases with prolonged interval of the rolling passes. Straininduced precipitation can lead to an appearance of a platform in the kinetic curve of static recrystallization. Different from the conventional micro-alloying steel, the strain-induced precipitates in 403Nb steel during hot rolling are carbides containing Nb and Cr.展开更多
基金supports from the Fundamental Research Funds for the Central Universities (Grant No.N100507003)the National Natural Science Foundation of China (Key Program,Grant No.50634030) are greatly acknowledged
文摘Dynamic recrystallization （DRX） behaviors of a heat-resistant martensitic stainless steel 403Nb during hot deformation have been investigated by single-pass thermo-mechanical simulative experiment at temperatures of 900-1150℃ and strain rates of 0.01-1 s-1 The results show that the true stress-true strain curves of this alloy can be classified into two types, one is of dynamic recovery and the other is of dynamic recrystallization. The DRX in 403Nb alloy is easy to occur at strain rates lower than 0.5 s-1 and deformation temperatures higher than 1000℃. Using regression analysis, the stress multiplier （a） and apparent stress exponent （n） were calculated to be 0.0153 and 3.22, respectively, while the activation energy （Qd） for DRX of 403Nb was calculated to be 367.293 kJ/mol. The constitutive equation of peak stress for DRX was also obtained. Based on P-J method, the critical strain for DRX was accurately determined. The mathematical models of peak strain and kinetic equation for DRX of 403Nb steel were finally established.
基金supported by the Fundamental Research Funds for the Central Universities (No.N100507003)the National Natural Science Foundation of China (No.50634030)
文摘A static recrystallization behavior between the roiling passes of a martensitic heatresistant stainless steel 403Nb has been studied by OM, TEM and double-hit thermomechanical simulator to explore the effects of deformation temperature, strain rate, strain and the prior austenite grain size. The results show that increases of deformation temperature and strain rate and strain can promote the static recrystallization of 403Nb steel. Static recrystallization also proceeds faster when the prior austenite grain size is smaller. Microstructural observation indicates that the volume fraction of static recrystallization increases with prolonged interval of the rolling passes. Straininduced precipitation can lead to an appearance of a platform in the kinetic curve of static recrystallization. Different from the conventional micro-alloying steel, the strain-induced precipitates in 403Nb steel during hot rolling are carbides containing Nb and Cr.
