5-Hydroxymethylfurfural(5-HMF),as a key platform compound for the conversion of biomass to various biomass-derived chemicals and biofuels,has been attracted extensive attention.In this research,using Pickering high in...5-Hydroxymethylfurfural(5-HMF),as a key platform compound for the conversion of biomass to various biomass-derived chemicals and biofuels,has been attracted extensive attention.In this research,using Pickering high internal phase emulsions(Pickering HIPEs)as template and functional metal-organic frameworks(MOFs,UiO-66-SO;H and UiO-66-NH;)/Tween 85 as co-stabilizers to synthesis the dual acid-base bifunctional macroporous polymer catalyst by one-pot process,which has excellent catalytic activity in the cascade reaction of converting cellulose to 5-HMF.The effects of the emulsion parameters including the amount of surfactant(ranging from 0.5%to 2.0%(mass)),the internal phase volume fraction(ranging from 75%to 90%)and the acid/base Pickering particles mass ratio(ranging from 0:6 to 6:0)on the morphology and catalytic performance of solid catalyst were systematically researched.The results of catalytic experiments suggested that the connected large pore size of catalyst can effectively improve the cellulose conversion,and the synergistic effect of acid and base active sites can effectively improve the 5-HMF yield.The highest 5-HMF yield,about 40.5%,can be obtained by using polymer/MOFs composite as catalyst(Poly-P12,the pore size of(53.3±11.3)μm,the acid density of 1.99 mmol·g^(-1)and the base density of 1.13 mol·g^(-1))under the optimal reaction conditions(130℃,3 h).Herein,the polymer/MOFs composite with open-cell structure was prepared by the Pickering HIPEs templating method,which provided a favorable experimental basis and theoretical reference for achieving efficient production of high addedvalue product from abundant biomass.展开更多
基金financially supported by the National Natural Science Foundation of China(No.21606100)the Natural Science Foundation of Jiangsu Province(No.BK20180850)+1 种基金the China Postdoctoral Science Foundation(Nos.2019M651740 and 2019T120397)the Young Talent Cultivate Programme of Jiangsu University。
文摘5-Hydroxymethylfurfural(5-HMF),as a key platform compound for the conversion of biomass to various biomass-derived chemicals and biofuels,has been attracted extensive attention.In this research,using Pickering high internal phase emulsions(Pickering HIPEs)as template and functional metal-organic frameworks(MOFs,UiO-66-SO;H and UiO-66-NH;)/Tween 85 as co-stabilizers to synthesis the dual acid-base bifunctional macroporous polymer catalyst by one-pot process,which has excellent catalytic activity in the cascade reaction of converting cellulose to 5-HMF.The effects of the emulsion parameters including the amount of surfactant(ranging from 0.5%to 2.0%(mass)),the internal phase volume fraction(ranging from 75%to 90%)and the acid/base Pickering particles mass ratio(ranging from 0:6 to 6:0)on the morphology and catalytic performance of solid catalyst were systematically researched.The results of catalytic experiments suggested that the connected large pore size of catalyst can effectively improve the cellulose conversion,and the synergistic effect of acid and base active sites can effectively improve the 5-HMF yield.The highest 5-HMF yield,about 40.5%,can be obtained by using polymer/MOFs composite as catalyst(Poly-P12,the pore size of(53.3±11.3)μm,the acid density of 1.99 mmol·g^(-1)and the base density of 1.13 mol·g^(-1))under the optimal reaction conditions(130℃,3 h).Herein,the polymer/MOFs composite with open-cell structure was prepared by the Pickering HIPEs templating method,which provided a favorable experimental basis and theoretical reference for achieving efficient production of high addedvalue product from abundant biomass.
文摘采用十二烷基硫酸钠(SDS)和聚乙二醇辛基苯基醚(OP乳化剂)组成的复合乳化剂,制备了甲基丙烯酸1,1,5-三氢全氟戊酯(OFPM A)-丙烯酸丁酯(BA)-甲基丙烯酸甲酯(MM A)三元共聚乳液。通过FT-IR、1H-NM R对共聚物进行了表征。对乳液的稳定性、乳胶膜的耐溶剂性进行了研究,用接触角法研究了共聚物膜表面的性质。结果表明,加入含氟丙烯酸酯单体进行共聚合反应时,所得共聚物膜的表面自由能与无氟共聚物膜比较有显著的降低,当含氟单体的加入量达到质量分数为20%时,所得膜的表面自由能降低到25.12 m J/m2。对该含氟膜进行退火处理后,其表面自由能进一步降低到23.52 m J/m2。
