The influence of temperature and hardness level on the cyclic behavior of 55NiCrMoV7 steel, and the mierostrueture variation and hardness diminution during low cycle fatigue behavior were investigated. By means of SEM...The influence of temperature and hardness level on the cyclic behavior of 55NiCrMoV7 steel, and the mierostrueture variation and hardness diminution during low cycle fatigue behavior were investigated. By means of SEM and XRD, the modality of carbides and the full width half-maximum （FWHM） of martensite （211） [M（211）] of Xray diffraction spectrum in fatigue specimen were studied. The results showed that the cyclic stress response behav ior generally showed an initial exponential softening for the first few cycles, followed by a gradual softening without cyclic softening saturation. The fatigue behavior of the steel is closely related to the hardness level. The hardness diminution and the variation of half-width M（211） are remarkably influenced by the interaction between the cyclic plastic deformation and the thermal loading when the fatigue temperature exceeds the tempering temperature of the steel.展开更多
Low cycle fatigue behaviour of a steel 55NiCrMoV7 under four tempered conditions is reported. One special type of total strain controlled isothermal cyclic deformation tests were performed in the temperature range 20&...Low cycle fatigue behaviour of a steel 55NiCrMoV7 under four tempered conditions is reported. One special type of total strain controlled isothermal cyclic deformation tests were performed in the temperature range 20°C to 600°C for the steel tempered 2h at 350 °C, 460 °C, 560 °C and 600 °C. The influence of temperature on cyclic behaviour was investigated. Generally, the cyclic stress response shows an initial exponential softening for the first few cycles, followed by a gradual softening without cyclic softening saturation. At 10"2 strain rate, amax,A(T/2 decrease with the test temperature for all hardness levels. They decrease linearly with tempering temperature when testing temperature is lower than that of tempering, but rest nearly constant when test temperature is equal to or exceed tempering temperature of steel. Cyclic softening intensity increases with testing temperature from 300°C to 600°C, but the maximal softening intensity occurs at room temperature. The strain rate influences notably the cyclic behaviour when T>500°C. The time dependence of cyclic behaviour is closely related to test temperature and the tempering history of the steel.展开更多
基金Item Sponsored by Scientific Research Foundation for Returned Overseas Chinese Scholars ,State Education Ministry(2004176)
文摘The influence of temperature and hardness level on the cyclic behavior of 55NiCrMoV7 steel, and the mierostrueture variation and hardness diminution during low cycle fatigue behavior were investigated. By means of SEM and XRD, the modality of carbides and the full width half-maximum （FWHM） of martensite （211） [M（211）] of Xray diffraction spectrum in fatigue specimen were studied. The results showed that the cyclic stress response behav ior generally showed an initial exponential softening for the first few cycles, followed by a gradual softening without cyclic softening saturation. The fatigue behavior of the steel is closely related to the hardness level. The hardness diminution and the variation of half-width M（211） are remarkably influenced by the interaction between the cyclic plastic deformation and the thermal loading when the fatigue temperature exceeds the tempering temperature of the steel.
文摘Low cycle fatigue behaviour of a steel 55NiCrMoV7 under four tempered conditions is reported. One special type of total strain controlled isothermal cyclic deformation tests were performed in the temperature range 20°C to 600°C for the steel tempered 2h at 350 °C, 460 °C, 560 °C and 600 °C. The influence of temperature on cyclic behaviour was investigated. Generally, the cyclic stress response shows an initial exponential softening for the first few cycles, followed by a gradual softening without cyclic softening saturation. At 10"2 strain rate, amax,A(T/2 decrease with the test temperature for all hardness levels. They decrease linearly with tempering temperature when testing temperature is lower than that of tempering, but rest nearly constant when test temperature is equal to or exceed tempering temperature of steel. Cyclic softening intensity increases with testing temperature from 300°C to 600°C, but the maximal softening intensity occurs at room temperature. The strain rate influences notably the cyclic behaviour when T>500°C. The time dependence of cyclic behaviour is closely related to test temperature and the tempering history of the steel.
