Hybrid polymer membrane(TA-APTES),synthesized by tannic acid(TA)and aminopropyl trethoxysilane(APTES)based on the Schif’s base and Michael addition reaction,is deposited on the surface of poly(p-phenylene-2,6-benzobi...Hybrid polymer membrane(TA-APTES),synthesized by tannic acid(TA)and aminopropyl trethoxysilane(APTES)based on the Schif’s base and Michael addition reaction,is deposited on the surface of poly(p-phenylene-2,6-benzobisoxazole)(PBO)fbers,and then grafted with epoxy-terminated polysesquisiloxane(POSS)to obtain POSS-g-PBO@TA-APTES fbers.The POSS-g-PBO@TA-APTES fbers reinforced bisphenol A dicyanate ester(BADCy)resins(POSS-g-PBO@TAAPTES fbers/BADCy)wave-transparent laminated composites are prepared.The interlaminar shear strength and fexural strength of POSS-g-PBO@TA-APTES fbers/BADCy composites are respectively enhanced from 36.7 and 587.4 MPa to 42.8 and 645.8 MPa,increased by 16.6%and 9.9%compared with those of PBO fbers/BADCy composites.At 1 MHz,the corresponding dielectric constant and dielectric loss are reduced to 2.85 and 0.0047,respectively,lower than those of PBO fbers/BADCy(3.06 and 0.006)composites.Meanwhile,the simulated wave transmittance rate of POSS-g-PBO@TA-APTES fbers/BADCy composites with the thicknesses of 1.5–3.5 mm is higher than 86.2%at 0.3–40 GHz.The volume resistivity and breakdown strength of POSS-g-PBO@TA-APTES fbers/BADCy composites are 2.8×10^(15)Ω·cm and 19.80 kV/mm,higher than PBO fbers/BADCy composites(2.2×10^(15)Ω·cm and 17.69 kV/mm),respectively.And the corresponding heat resistant index is 221.5℃,lower than PBO fbers/BADCy composites(229.6℃).展开更多
基金The authors are grateful for the support and funding from National Scientifc Research Project(Basis Strengthening Plan)China Postdoctoral Science Foundation(2019M653735)+3 种基金State Key Laboratory for Modifcation of Chemical Fibers and Polymer Materials from Donghua University(KF2001)State Key Laboratory of Solidifcation Processing in NWPU(SKLSP202103)L.Tang thanks for the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(CX2021036)This work is also fnancially supported by Polymer Electromagnetic Functional Materials Innovation Team of Shaanxi Sanqin Scholars.
文摘Hybrid polymer membrane(TA-APTES),synthesized by tannic acid(TA)and aminopropyl trethoxysilane(APTES)based on the Schif’s base and Michael addition reaction,is deposited on the surface of poly(p-phenylene-2,6-benzobisoxazole)(PBO)fbers,and then grafted with epoxy-terminated polysesquisiloxane(POSS)to obtain POSS-g-PBO@TA-APTES fbers.The POSS-g-PBO@TA-APTES fbers reinforced bisphenol A dicyanate ester(BADCy)resins(POSS-g-PBO@TAAPTES fbers/BADCy)wave-transparent laminated composites are prepared.The interlaminar shear strength and fexural strength of POSS-g-PBO@TA-APTES fbers/BADCy composites are respectively enhanced from 36.7 and 587.4 MPa to 42.8 and 645.8 MPa,increased by 16.6%and 9.9%compared with those of PBO fbers/BADCy composites.At 1 MHz,the corresponding dielectric constant and dielectric loss are reduced to 2.85 and 0.0047,respectively,lower than those of PBO fbers/BADCy(3.06 and 0.006)composites.Meanwhile,the simulated wave transmittance rate of POSS-g-PBO@TA-APTES fbers/BADCy composites with the thicknesses of 1.5–3.5 mm is higher than 86.2%at 0.3–40 GHz.The volume resistivity and breakdown strength of POSS-g-PBO@TA-APTES fbers/BADCy composites are 2.8×10^(15)Ω·cm and 19.80 kV/mm,higher than PBO fbers/BADCy composites(2.2×10^(15)Ω·cm and 17.69 kV/mm),respectively.And the corresponding heat resistant index is 221.5℃,lower than PBO fbers/BADCy composites(229.6℃).
