Chiral Phosphine Ligands Derived from Sugars8. Crystal and Molecular Structure of Diphenyl (methyl 4', 6'-O-benzylidene-2'-deoxy-α-D-altropyranoside-2-)phosphine Oxide

The crystal structure of the title compound, C26H27O6P, has been determined by single--crystal X-ray diffraction. The crystal is monoclinic with space groupP21, a=16. 193(l), b=5. 804(1), c=12. 512(2) A, β=93. 187(5)°, V=1174. 13A3, Dc=1. 319 g/cm3, F(000) =492, μ= 13. 52 cm-1, Z= 2, and final R= 0. 042and Rw= 0. 040 for 2349 reflections (I≥3σ(I)). Structure analysis revealed that thepyranose and 4, 6-O-benzylidene ring of the title compound adopts a distorted chair conformation.

Kinetics of 2-Methyl-6-acetyl-naphthalene Liquid Phase Catalytic Oxidation

In this paper, a kinetics model for the liquid-phase oxidation of 2-methyl-6-acetyl-naphthalene to 2,6-naphthalene dicarboxylic acid catalyzed by cobalt-manganese-bromide is proposed. The effects of the reaction temperature, catalyst concentration and ratio of catalyst on the lime evolution of the experimental concentration for the constituents including raw material, intermediates and product are investigated. The model parameters are determined in a nonlinear optimization, minimizing the difference between the simulated and experimental time evolution of the product composition obtained in a semi-batch oxidation reactor where the gas and liquid phase were well nuxed. The kinetics data demonstrate that the model is suitable to the liquid-phase oxidation of 2-methyl-6-acetyl-naphthalene to 2,6-naphthalene dicarboxylic acid.

Synthesis and Crystal Structure of 2-[(4-Methoxy- 6-methylthio-2-pyrimidinyl)aminocarbonyl- aminosulfonyl] Benzoic Acid Methyl Ester

The title compound 2-[(4-methoxy-6-methylthio-2-pyrimidinyl)aminocarbonyl- aminosulfonyl]benzoic acid methyl ester (C15H16N4O6S2, Mr = 412.44) was obtained by the reaction of (4-methoxy-6-methylthio-2-pyrimidinyl)amine with 2-methoxylcarbonylbenzene-sulfonylisocya- nate. The crystal is of monoclinic, space group P21/c with a =11.169(3), b = 9.508(3), c = 17.690(5) ? b = 91.593(5), Z = 4, V = 1877.9(10) 3, Dc = 1.459 g/cm3, F(000) = 856, m(MoKa) = 0.324 mm-1, R = 0.0690 and wR = 0.1368 for 3301 observed reflections (I > 2s(I)). The N(1)H…N(3) and N(2)H…O(4) hydrogen bonds can be observed. In the molecule the phenyl plane(I), pyrimi- din-2-yl-urea bridge plane(Ⅱ) and ester plane(Ⅲ) form three conjugated systems.

Synthesis and Crystal Structure of 3-(2-Hydroxy-phenyl)-5-(2-methyl-phenyl)-6-thoxycarbonyl-cyclohexen-2-one

Hydroxy-phenyl)-5-(2-methyl-phenyl)-6-ethoxycarbonyl-cyclohexen-2-one has been synthesized and characterized by elemental analysis, IR, UV, H NMR and MS, and its crystal 1 structure was determined by X-ray single-crystal diffraction method. The crystal belongs to the monoclinic system, space group P21/c with a = 14.6298(13), b = 5.8623(5), c = 22.255(2) ?, β = 105.855(2)o, V = 1836.0(3) ?3, Mr = 350.40, Z = 4, Dc = 1.268 g/cm3, F(000) = 744, μ(MoKα) = 0.086 mm-1, R = 0.0680 and wR = 0.1498. The crystal analysis results show that the cyclohexene unit of the title compound has a quasi-chair conformation, and a centrosymmetric dimer with a 16-membered ring is produced by the intermolecular hydrogen bonds.

Crystal Structure and Electrochemical Behavior of Copper Complex with 6-Hydroxymethyl-substituted Tris(2-pyridylmethyl) Amine, [CuCl(C_(19)H_(20)N_4O)]ClO_4

A Cu(II) complex [CuCl(C19H20N4O)]ClO4 1 containing hydroxymethyl substituted TPA (TPA = tris(2-pyridylmethyl)amine) was prepared. It crystallizes in monoclinic, space group P21/c with a = 11.7628(2), b = 13.0083(3), c = 15.11280(10) ?, β = 108.724(2)°, V = 2190.09(7) ?3, Mr = 518.83, Z = 4, T = 293(2) K, Dc = 1.574 g/cm3, μ = 1.280 mm-1, F(000) = 1060 and S = 1.085. The final R = 0.0543 and wR = 0.1433 for 2693 observed reflections with I >2σ(I). The penta- coordinated copper (II) complex assumes an approximate square pyramidal geometry. Cyclic volta- mmetry measurement of the complex showed a quasi-reversible CuII/CuI redox couple with E1/2 = –0.467 v and ?E = 68 mv.

Study on the regioselective alkylation of 2-thiopyrimidine

Aim To investigate the alkylation of 2-thiopyrimidine. Methods Treating the starting material 2-thiopyrimidine with chloromethyl ethers via a procedure of K2CO3 in DMF or with alkyl halide in CH3ONa-CH3OH at room temperature, to obtain the corresponding regioselective 2-S-allkyl pyrimidines. The products were determined by JH NMR, 2D NMR, IR and MS spectra. Results 2-S-alkyl-pyrimidines were regioselectively synthesized. Conclusion In different conditions with different alkyl halides, 2- thiouracil could be converted into the corresponding 2-S-alkylpyrimidines regioselectively.