In this study,a binder based 3D-printing technology viz.Fused Granular Fabrication(FGF)technique was used to produce interconnected and open porous Mg-6.3Gd bone scaffolds for compression test analyses.The consolidati...In this study,a binder based 3D-printing technology viz.Fused Granular Fabrication(FGF)technique was used to produce interconnected and open porous Mg-6.3Gd bone scaffolds for compression test analyses.The consolidation of the green parts(as printed scaffolds)was performed using solvent debinding in cyclohexane and subsequent conventional sintering in argon atmosphere.Compression tests were performed on as sintered parts.Additionally,a simulation strategy was developed for modeling the compression behavior of the sintered parts,utilizing the data from the experimental results.The experimental compression test results and the simulation strategy for the compression behavior of the 3D-printed scaffolds demonstrated good agreement.展开更多
基金Alexander von Humboldt Foundation for the award of the Post-Doctoral Fellowship to M.Marvi-Mashhadi to undertake this research workthe support from the Bundesministerium für Bildung und Forschung(BMBF)through Bio Mag3D project code Nr.03VP09852 to undertake this research。
文摘In this study,a binder based 3D-printing technology viz.Fused Granular Fabrication(FGF)technique was used to produce interconnected and open porous Mg-6.3Gd bone scaffolds for compression test analyses.The consolidation of the green parts(as printed scaffolds)was performed using solvent debinding in cyclohexane and subsequent conventional sintering in argon atmosphere.Compression tests were performed on as sintered parts.Additionally,a simulation strategy was developed for modeling the compression behavior of the sintered parts,utilizing the data from the experimental results.The experimental compression test results and the simulation strategy for the compression behavior of the 3D-printed scaffolds demonstrated good agreement.