In the present work,the laminar plasma surface hardening method is employed to enhance the service life of metal components fabricated from 65 Mn steel.The mechanical and wear behaviors of the laminar plasma surface h...In the present work,the laminar plasma surface hardening method is employed to enhance the service life of metal components fabricated from 65 Mn steel.The mechanical and wear behaviors of the laminar plasma surface hardened 65 Mn steel were analyzed.The martensite transition transformation of the temperature of the laminar plasma-hardened 65 ferrite Mn steel was determined by a thermal-solid coupling model.Based on the orthogonal experimental results,the optimal hardening parameters were confirmed.The scanning velocity,quenching distance and arc current are 130 mm/min,50 mm and 120 A,respectively.The pearlites and ferrites are transformed into martensites in the hardened zone,while the ratio of martensite in the heataffected zone decreases with the increase in the hardening depth.Compared to the untreated 65Mn steel,the average hardness increases from 220 HV_(0.2)to 920 HV_(0.2)in the hardened zone and the corresponding absorbed power increases from 118.7 J to 175.5 J.At the same time,the average coefficient of friction(COF)decreases from 0.763 to 0.546,and the wear rate decreases from 5.39×10^(-6)mm^(3)/(N·m)to 2.95×10^(-6)mm^(3)/(N·m),indicating that the wear resistance of 65Mn steel could be significantly improved by using laminar surface hardening.With the same hardening parameters,the depth and width of the hardened zone predicted by the thermal-solid coupling model are 1.85 mm and 11.20 mm,respectively,which are in accordance with the experimental results;depth is 1.83 mm and width is 11.15 mm.In addition,the predicted hardness distributions of the simulation model are in accordance with the experimental results.These results indicate that the simulation model could effectively predict the microstructure characteristics of 65 Mn steel.展开更多
Submerged arc welding（SAW）is one of the main welding processes with high deposition rate and high welding quality.This welding method is extensively used in welding large-diameter gas transmission pipelines and high...Submerged arc welding（SAW）is one of the main welding processes with high deposition rate and high welding quality.This welding method is extensively used in welding large-diameter gas transmission pipelines and high-pressure vessels.In welding of such structures,the selection process parameters has great influence on the weld bead geometry and consequently affects the weld quality.Based on Fuzzy logic and NSGA-II（Non-dominated Sorting Genetic Algorithm-II）algorithm,a new approach was proposed for weld bead geometry prediction and for process parameters optimization.First,different welding parameters including welding voltage,current and speed were set to perform SAW under different conditions on API X65 steel plates.Next,the designed Fuzzy model was used for predicting the weld bead geometry and modeling of the process.The obtained mean percentage error of penetration depth,weld bead width and height from the proposed Fuzzy model was 6.06%,6.40% and 5.82%,respectively.The process parameters were then optimized to achieve the desired values of convexity and penetration indexes simultaneously using NSGA-II algorithm.As a result,a set of optimum vectors（each vector contains current,voltage and speed within their selected experimental domains）was presented for desirable values of convexity and penetration indexes in the ranges of（0.106,0.168）and（0.354,0.561）respectively,which was more applicable in real conditions.展开更多
100 t LF原精炼终渣(/%:53.8CaO,8.16MgO,16.6SiO_2,17.45Al_2O_3,1.44TFe,1.26S,R3.08)优化成终渣(/%:51.3CaO,6.36MgO,25.0SiO_2,6.73Al_2O_3,2.96TFe,0.76S,R2.05)后,通过降低碱度和渣中Al_2O_3含量,65Mn钢(/%:0.63~0.65C,0.19~0.22S...100 t LF原精炼终渣(/%:53.8CaO,8.16MgO,16.6SiO_2,17.45Al_2O_3,1.44TFe,1.26S,R3.08)优化成终渣(/%:51.3CaO,6.36MgO,25.0SiO_2,6.73Al_2O_3,2.96TFe,0.76S,R2.05)后,通过降低碱度和渣中Al_2O_3含量,65Mn钢(/%:0.63~0.65C,0.19~0.22Si,0.92~0.96Mn,0.005~0.006S,0.021~0.022P,0.003 5~0.0037T[O])中的夹杂物当量个数由18.4个/mm^2减少到11.3个/mm^2,其平均直径由8.4μm减小到4.5μm。相比原精炼渣系,采用优化渣系的65Mn在LF出站时的钢中Al_2O_3由5.9个/mm^2降低到1.7个/mm^2;其CaO-SiO_2-Al_2O_3和CaO-SiO_2-Al_2O_3-MgO复合夹杂物中Al_2O_3含量由38.3%~44.7%降低到17.5%~28.7%。B类Al_2O_3夹杂物不合格的卷数由6%降至3%。展开更多
基金appreciate the support of the Key Laboratory of Mechanical Structure Optimization&Material Application Technology of Luzhou(No.SCHYZSA-2022-02)the Scientific Research and Innovation Team Program of Sichuan University of Science and Technology(No.SUSE652A004)+1 种基金the Key Laboratory of Intelligent Manufacturing of Construction Machinery Project(No.IMCM202103)the Panzhihua Key Laboratory of Advanced Manufacturing Technology Open Fund Project(No.2022XJZD01)。
文摘In the present work,the laminar plasma surface hardening method is employed to enhance the service life of metal components fabricated from 65 Mn steel.The mechanical and wear behaviors of the laminar plasma surface hardened 65 Mn steel were analyzed.The martensite transition transformation of the temperature of the laminar plasma-hardened 65 ferrite Mn steel was determined by a thermal-solid coupling model.Based on the orthogonal experimental results,the optimal hardening parameters were confirmed.The scanning velocity,quenching distance and arc current are 130 mm/min,50 mm and 120 A,respectively.The pearlites and ferrites are transformed into martensites in the hardened zone,while the ratio of martensite in the heataffected zone decreases with the increase in the hardening depth.Compared to the untreated 65Mn steel,the average hardness increases from 220 HV_(0.2)to 920 HV_(0.2)in the hardened zone and the corresponding absorbed power increases from 118.7 J to 175.5 J.At the same time,the average coefficient of friction(COF)decreases from 0.763 to 0.546,and the wear rate decreases from 5.39×10^(-6)mm^(3)/(N·m)to 2.95×10^(-6)mm^(3)/(N·m),indicating that the wear resistance of 65Mn steel could be significantly improved by using laminar surface hardening.With the same hardening parameters,the depth and width of the hardened zone predicted by the thermal-solid coupling model are 1.85 mm and 11.20 mm,respectively,which are in accordance with the experimental results;depth is 1.83 mm and width is 11.15 mm.In addition,the predicted hardness distributions of the simulation model are in accordance with the experimental results.These results indicate that the simulation model could effectively predict the microstructure characteristics of 65 Mn steel.
文摘Submerged arc welding（SAW）is one of the main welding processes with high deposition rate and high welding quality.This welding method is extensively used in welding large-diameter gas transmission pipelines and high-pressure vessels.In welding of such structures,the selection process parameters has great influence on the weld bead geometry and consequently affects the weld quality.Based on Fuzzy logic and NSGA-II（Non-dominated Sorting Genetic Algorithm-II）algorithm,a new approach was proposed for weld bead geometry prediction and for process parameters optimization.First,different welding parameters including welding voltage,current and speed were set to perform SAW under different conditions on API X65 steel plates.Next,the designed Fuzzy model was used for predicting the weld bead geometry and modeling of the process.The obtained mean percentage error of penetration depth,weld bead width and height from the proposed Fuzzy model was 6.06%,6.40% and 5.82%,respectively.The process parameters were then optimized to achieve the desired values of convexity and penetration indexes simultaneously using NSGA-II algorithm.As a result,a set of optimum vectors（each vector contains current,voltage and speed within their selected experimental domains）was presented for desirable values of convexity and penetration indexes in the ranges of（0.106,0.168）and（0.354,0.561）respectively,which was more applicable in real conditions.
文摘100 t LF原精炼终渣(/%:53.8CaO,8.16MgO,16.6SiO_2,17.45Al_2O_3,1.44TFe,1.26S,R3.08)优化成终渣(/%:51.3CaO,6.36MgO,25.0SiO_2,6.73Al_2O_3,2.96TFe,0.76S,R2.05)后,通过降低碱度和渣中Al_2O_3含量,65Mn钢(/%:0.63~0.65C,0.19~0.22Si,0.92~0.96Mn,0.005~0.006S,0.021~0.022P,0.003 5~0.0037T[O])中的夹杂物当量个数由18.4个/mm^2减少到11.3个/mm^2,其平均直径由8.4μm减小到4.5μm。相比原精炼渣系,采用优化渣系的65Mn在LF出站时的钢中Al_2O_3由5.9个/mm^2降低到1.7个/mm^2;其CaO-SiO_2-Al_2O_3和CaO-SiO_2-Al_2O_3-MgO复合夹杂物中Al_2O_3含量由38.3%~44.7%降低到17.5%~28.7%。B类Al_2O_3夹杂物不合格的卷数由6%降至3%。
