The Li_(2)ZnTi_(3)O_(8)@Li AlO_(2)was synthesized by a facile high-temperature solid-state route.The LiAlO_(2)modification does not alter the morphology and particle size of Li_(2)Zn Ti_(3)O_(8)(LZTO).The LiAlO_(2)mod...The Li_(2)ZnTi_(3)O_(8)@Li AlO_(2)was synthesized by a facile high-temperature solid-state route.The LiAlO_(2)modification does not alter the morphology and particle size of Li_(2)Zn Ti_(3)O_(8)(LZTO).The LiAlO_(2)modification improves the structure stability,intercalation/deintercalation reversibility of lithium-ions,and electrochemical reaction activity of Li_(2)Zn Ti_(3)O_(8),and promotes the transfer of lithium ions.Benefited from the unique component,Li_(2)Zn Ti_(3)O_(8)@Li AlO_(2)(8wt%) shows a good rate performance with charge capacities of 203.9,194.8,187.4,180.6,and177.1 mAh·g^(-1)at 0.5,1,2,3,and 5 C,respectively.Nevertheless,pure LZTO only delivers charge capacities of 134.5,109.7,89.4,79.9,and 72.9 mAh·g^(-1)at the corresponding rates.Even at large charge–discharge rate,the Li_(2)Zn Ti_(3)O_(8)@Li AlO_(2)(8wt%) composite indicates a good cycle performance with a high reversible charge/discharge capacity of 263.5/265.8 mAh·g^(-1)at 5 C after 150 cycles.The introduction of LiAlO_(2)on the surface of Li_(2)Zn Ti_(3)O_(8)enhances electronic conductivity of the composite,resulting in the good electrochemical performance of Li_(2)Zn Ti_(3)O_(8)@Li AlO_(2)composite.Li_(2)Zn Ti_(3)O_(8)@LiAlO_(2)(8wt%) composite shows a good potential as an anode material for the next generation of high-performance Li-ion batteries.展开更多
The requirement of energy-storage equipment needs to develop the lithium ion battery(LIB) with high electrochemical performance. The surface modification of commercial LiFePO_4(LFP) by utilizing zeolitic imidazolate f...The requirement of energy-storage equipment needs to develop the lithium ion battery(LIB) with high electrochemical performance. The surface modification of commercial LiFePO_4(LFP) by utilizing zeolitic imidazolate frameworks-8(ZIF-8) offers new possibilities for commercial LFP with high electrochemical performances.In this work, the carbonized ZIF-8(C_(ZIF-8)) was coated on the surface of LFP particles by the in situ growth and carbonization of ZIF-8. Transmission electron microscopy indicates that there is an approximate 10 nm coating layer with metal zinc and graphite-like carbon on the surface of LFP/C_(ZIF-8) sample. The N_2 adsorption and desorptionisotherm suggests that the coating layer has uniform and simple connecting mesopores. As cathode material, LFP/C_(ZIF-8) cathode-active material delivers a discharge specific capacity of 159.3 m Ah g^(-1) at 0.1 C and a discharge specific energy of 141.7 m Wh g^(-1) after 200 cycles at 5.0 C(the retention rate is approximate 99%). These results are attributed to the synergy improvement of the conductivity,the lithium ion diffusion coefficient, and the degree of freedom for volume change of LFP/C_(ZIF-8) cathode. This work will contribute to the improvement of the cathode materials of commercial LIB.展开更多
Several challenging issues,such as the poor conductivity of sulfur,shuttle effects,large volume change of cathode,and the dendritic lithium in anode,have led to the low utilization of sulfur and hampered the commercia...Several challenging issues,such as the poor conductivity of sulfur,shuttle effects,large volume change of cathode,and the dendritic lithium in anode,have led to the low utilization of sulfur and hampered the commercialization of lithium–sulfur batteries.In this study,a novel three-dimensionally interconnected network structure comprising Co9 S8 and multiwalled carbon nanotubes(MWCNTs)was synthesized by a solvothermal route and used as the sulfur host.The assembled batteries delivered a specific capacity of1154 m Ah g-1 at 0.1 C,and the retention was 64%after 400 cycles at 0.5 C.The polar and catalytic Co9 S8 nanoparticles have a strong adsorbent effect for polysulfide,which can effectively reduce the shuttling effect.Meanwhile,the three-dimensionally interconnected CNT networks improve the overall conductivity and increase the contact with the electrolyte,thus enhancing the transport of electrons and Li ions.Polysulfide adsorption is greatly increased with the synergistic effect of polar Co9 S8 and MWCNTs in the three-dimensionally interconnected composites,which contributes to their promising performance for the lithium–sulfur batteries.展开更多
以 L i2 CO3 和 NH4 VO3 为原料 ,低温合成了 L i1+ x V3 O8.通过对中间产物的热分析 ,选定了低温合成 L i1+ x V3 O8的适宜煅烧温度为 30 0℃ .研究表明 ,L i1+ x V3 O8,原料 L i/ V摩尔比应大于1∶ 3.以 Li1+ x V3 O8作为正极材料 ,...以 L i2 CO3 和 NH4 VO3 为原料 ,低温合成了 L i1+ x V3 O8.通过对中间产物的热分析 ,选定了低温合成 L i1+ x V3 O8的适宜煅烧温度为 30 0℃ .研究表明 ,L i1+ x V3 O8,原料 L i/ V摩尔比应大于1∶ 3.以 Li1+ x V3 O8作为正极材料 ,金属锂为负极组装了模拟电池 ,高、低温合成材料具有较高的放电容量和放电电压 .XRD、SEM分析结果说明低温合成样品的结晶度低、粒径较小 .展开更多
基金supported by the National Natural Science Foundation of China (No.U1960107)the“333”Talent Project of Hebei Province,China (No.A202005018)+1 种基金the Fundamental Research Funds for the Central Universities(No.N2123001)the Performance Subsidy Fund for Key Laboratory of Dielectric and Electrolyte Functional Material Hebei Province,China (No.22567627H)。
文摘The Li_(2)ZnTi_(3)O_(8)@Li AlO_(2)was synthesized by a facile high-temperature solid-state route.The LiAlO_(2)modification does not alter the morphology and particle size of Li_(2)Zn Ti_(3)O_(8)(LZTO).The LiAlO_(2)modification improves the structure stability,intercalation/deintercalation reversibility of lithium-ions,and electrochemical reaction activity of Li_(2)Zn Ti_(3)O_(8),and promotes the transfer of lithium ions.Benefited from the unique component,Li_(2)Zn Ti_(3)O_(8)@Li AlO_(2)(8wt%) shows a good rate performance with charge capacities of 203.9,194.8,187.4,180.6,and177.1 mAh·g^(-1)at 0.5,1,2,3,and 5 C,respectively.Nevertheless,pure LZTO only delivers charge capacities of 134.5,109.7,89.4,79.9,and 72.9 mAh·g^(-1)at the corresponding rates.Even at large charge–discharge rate,the Li_(2)Zn Ti_(3)O_(8)@Li AlO_(2)(8wt%) composite indicates a good cycle performance with a high reversible charge/discharge capacity of 263.5/265.8 mAh·g^(-1)at 5 C after 150 cycles.The introduction of LiAlO_(2)on the surface of Li_(2)Zn Ti_(3)O_(8)enhances electronic conductivity of the composite,resulting in the good electrochemical performance of Li_(2)Zn Ti_(3)O_(8)@Li AlO_(2)composite.Li_(2)Zn Ti_(3)O_(8)@LiAlO_(2)(8wt%) composite shows a good potential as an anode material for the next generation of high-performance Li-ion batteries.
基金supported by the Scientific and Technological Development Project of the Beijing Education Committee(No.KZ201710005009)
文摘The requirement of energy-storage equipment needs to develop the lithium ion battery(LIB) with high electrochemical performance. The surface modification of commercial LiFePO_4(LFP) by utilizing zeolitic imidazolate frameworks-8(ZIF-8) offers new possibilities for commercial LFP with high electrochemical performances.In this work, the carbonized ZIF-8(C_(ZIF-8)) was coated on the surface of LFP particles by the in situ growth and carbonization of ZIF-8. Transmission electron microscopy indicates that there is an approximate 10 nm coating layer with metal zinc and graphite-like carbon on the surface of LFP/C_(ZIF-8) sample. The N_2 adsorption and desorptionisotherm suggests that the coating layer has uniform and simple connecting mesopores. As cathode material, LFP/C_(ZIF-8) cathode-active material delivers a discharge specific capacity of 159.3 m Ah g^(-1) at 0.1 C and a discharge specific energy of 141.7 m Wh g^(-1) after 200 cycles at 5.0 C(the retention rate is approximate 99%). These results are attributed to the synergy improvement of the conductivity,the lithium ion diffusion coefficient, and the degree of freedom for volume change of LFP/C_(ZIF-8) cathode. This work will contribute to the improvement of the cathode materials of commercial LIB.
基金National Natural Science Foundation of China(No.51974209)the Natural Science Foundation of Hubei Province of China(Nos.2013CFA021,2017CFB401,2018CFA022)。
文摘Several challenging issues,such as the poor conductivity of sulfur,shuttle effects,large volume change of cathode,and the dendritic lithium in anode,have led to the low utilization of sulfur and hampered the commercialization of lithium–sulfur batteries.In this study,a novel three-dimensionally interconnected network structure comprising Co9 S8 and multiwalled carbon nanotubes(MWCNTs)was synthesized by a solvothermal route and used as the sulfur host.The assembled batteries delivered a specific capacity of1154 m Ah g-1 at 0.1 C,and the retention was 64%after 400 cycles at 0.5 C.The polar and catalytic Co9 S8 nanoparticles have a strong adsorbent effect for polysulfide,which can effectively reduce the shuttling effect.Meanwhile,the three-dimensionally interconnected CNT networks improve the overall conductivity and increase the contact with the electrolyte,thus enhancing the transport of electrons and Li ions.Polysulfide adsorption is greatly increased with the synergistic effect of polar Co9 S8 and MWCNTs in the three-dimensionally interconnected composites,which contributes to their promising performance for the lithium–sulfur batteries.
文摘以 L i2 CO3 和 NH4 VO3 为原料 ,低温合成了 L i1+ x V3 O8.通过对中间产物的热分析 ,选定了低温合成 L i1+ x V3 O8的适宜煅烧温度为 30 0℃ .研究表明 ,L i1+ x V3 O8,原料 L i/ V摩尔比应大于1∶ 3.以 Li1+ x V3 O8作为正极材料 ,金属锂为负极组装了模拟电池 ,高、低温合成材料具有较高的放电容量和放电电压 .XRD、SEM分析结果说明低温合成样品的结晶度低、粒径较小 .
