TIG welding was used to deposit Co-8.8 Al-9.8 W-0.2 B superalloy on 304 austenite stainless steel. The form factor of weld, dilution ratio, microhardness, microstructure and distribution of alloying elements were inve...TIG welding was used to deposit Co-8.8 Al-9.8 W-0.2 B superalloy on 304 austenite stainless steel. The form factor of weld, dilution ratio, microhardness, microstructure and distribution of alloying elements were investigated. The microstructure of cladding layer was mainly hypoeutectic. The primary phases were cobalt-rich solid solution. The eutectic phase was composed of cobalt-rich solid solution,Co6W6C and Co Cx. When the boron content increased from 0.2% to 0.5%,the dilution ratio decreased,the primary phase became coarse and the microhardness decreased. When the boron content was from 0.5% to 2%,the dilution ratio and microhardness increased obviously,but the primary phase was refined.The hard phase of Co-8.8 Al-9.8 W became refined and the amount was raised,and the performance of cladding layer was improved with appropriate boron increase.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.51561019)
文摘TIG welding was used to deposit Co-8.8 Al-9.8 W-0.2 B superalloy on 304 austenite stainless steel. The form factor of weld, dilution ratio, microhardness, microstructure and distribution of alloying elements were investigated. The microstructure of cladding layer was mainly hypoeutectic. The primary phases were cobalt-rich solid solution. The eutectic phase was composed of cobalt-rich solid solution,Co6W6C and Co Cx. When the boron content increased from 0.2% to 0.5%,the dilution ratio decreased,the primary phase became coarse and the microhardness decreased. When the boron content was from 0.5% to 2%,the dilution ratio and microhardness increased obviously,but the primary phase was refined.The hard phase of Co-8.8 Al-9.8 W became refined and the amount was raised,and the performance of cladding layer was improved with appropriate boron increase.
