Through the experiment of natural seawater exposure corrosion, the antifouling properties of the plate specimens of 90Cu 10Ni alloy were studied, which were processed by different deformations, annealing treatments an...Through the experiment of natural seawater exposure corrosion, the antifouling properties of the plate specimens of 90Cu 10Ni alloy were studied, which were processed by different deformations, annealing treatments and surface treatments. The results indicate that after exposure corrosion for half a year, the antifouling properties of the specimens are quite different. The specimens processed by suitable deformations, annealing treatment at 650?℃ and pretreatment of surface film possess both good corrosion resistance and antifouling properties. However, the specimens processed by different deformations and annealing treatment at 450?℃ possess lower corrosion resistance, although they are also treated by the pretreatment of surface film; their antifouling properties change with different deformations. The relationships among the corrosion morphology and microstructure with the antifouling property of 90Cu 10Ni alloy are observed under the scanning electron microscopy (SEM).展开更多
Two kinds of 90Cu10 Ni tubes with different service lives（more than 3 years and only 1 year,respectively）under identical working conditions were studied by an immersion test in a 3.5 wt% NaCl solution and the electr...Two kinds of 90Cu10 Ni tubes with different service lives（more than 3 years and only 1 year,respectively）under identical working conditions were studied by an immersion test in a 3.5 wt% NaCl solution and the electron backscattered diffraction（EBSD） technique.The morphology after immersion showed severer corrosion attack at the grain boundaries of the tube with shorter service life compared with the tube with longer service life.The grain boundary characterization distributions（GBCDs） of the two tubes obtained by EBSD revealed more Σ3 boundaries and twins,and larger random boundary meshes in the tube with longer service life.A short immersion test in a modified Livingston＇s solution was conducted to evaluate the tendency to corrosion attack of different types of the grain boundaries.SEM and AFM were used to characterize the corrosion morphologies of the boundaries.A strong correlation between varying depths of corrosion grooves and types of the grain boundaries was obtained.The influence of deviation angle of low Σ boundaries on corrosion resistance of the grain boundaries was also discussed.It is concluded that a special ‘‘grain boundary engineering＇＇（GBE） treatment has been performed on the tube with longer service life.It is proposed that the optimized GBCD is responsible for the better service performance of the tube.展开更多
文摘Through the experiment of natural seawater exposure corrosion, the antifouling properties of the plate specimens of 90Cu 10Ni alloy were studied, which were processed by different deformations, annealing treatments and surface treatments. The results indicate that after exposure corrosion for half a year, the antifouling properties of the specimens are quite different. The specimens processed by suitable deformations, annealing treatment at 650?℃ and pretreatment of surface film possess both good corrosion resistance and antifouling properties. However, the specimens processed by different deformations and annealing treatment at 450?℃ possess lower corrosion resistance, although they are also treated by the pretreatment of surface film; their antifouling properties change with different deformations. The relationships among the corrosion morphology and microstructure with the antifouling property of 90Cu 10Ni alloy are observed under the scanning electron microscopy (SEM).
基金supported by the National Natural Science Foundation of China (No.51131008)the Shanghai Science and Technology Commission (No.13520500500)
文摘Two kinds of 90Cu10 Ni tubes with different service lives（more than 3 years and only 1 year,respectively）under identical working conditions were studied by an immersion test in a 3.5 wt% NaCl solution and the electron backscattered diffraction（EBSD） technique.The morphology after immersion showed severer corrosion attack at the grain boundaries of the tube with shorter service life compared with the tube with longer service life.The grain boundary characterization distributions（GBCDs） of the two tubes obtained by EBSD revealed more Σ3 boundaries and twins,and larger random boundary meshes in the tube with longer service life.A short immersion test in a modified Livingston＇s solution was conducted to evaluate the tendency to corrosion attack of different types of the grain boundaries.SEM and AFM were used to characterize the corrosion morphologies of the boundaries.A strong correlation between varying depths of corrosion grooves and types of the grain boundaries was obtained.The influence of deviation angle of low Σ boundaries on corrosion resistance of the grain boundaries was also discussed.It is concluded that a special ‘‘grain boundary engineering＇＇（GBE） treatment has been performed on the tube with longer service life.It is proposed that the optimized GBCD is responsible for the better service performance of the tube.
