In order to study the effects of the process parameters on springback and section deformation, a sensitivity analysis model was established based on the combination use of the multi-parameter sensitivity analysis meth...In order to study the effects of the process parameters on springback and section deformation, a sensitivity analysis model was established based on the combination use of the multi-parameter sensitivity analysis method and the springback/section deformation prediction finite element model, and by using this model the sensitivities of the springback and the section deformation to process parameters were analyzed and compared. The results show that the most sensitive process conditions for springback angle are the boost speed and the pressure of pressure die, and the most sensitive process condition for section deformation is the number of cores. When the clamp force, the boost speed and the pressure of pressure die are utilized to control section deformation, the effect of these process parameters on springback should be considered. When the process parameters are mainly used to control springback, the effect of these process parameters on the section deformation should be always considered.展开更多
The objective of this study is to improve the production of L-DOPA from fungal source like Aspergillus terreus that can be further used to large-scale commercial production of this important drug from microbial source...The objective of this study is to improve the production of L-DOPA from fungal source like Aspergillus terreus that can be further used to large-scale commercial production of this important drug from microbial sources. L-DOPA, a dopamine precursor that can pass the blood-brain barrier, is presently the drug of choice for Parkinson＇s disease. Microbial production and isolation of L-DOPA from natural sources is yet to be achieved an economical process. In this study, the mycelial pellets ofAspergillus terreus 104 were entrapped in 2% calcium alginate and were studied for their capacity for L-3, 4-dihydroxyphenylalanine production. Results showed that the immobilized pellets produced L-DOPA to the extent of 0.74 mg·G^-1 biomass while the free pellets produced 0.8 mg·G^-1 biomass. Further, storage of immobilized pellets for 96 h at 4 ℃ resulted in the reduction of the original L-DOPA producing activity of the gel beads only 40% and that of free pellets lost completely. In order to improve the production yield, further experiments were designed. It was found that L-DOPA production could be prolonged with repeated batch wise use of immobilized mycelial pellets in calcium alginate retaining 80% of their L-DOPA producing capacity for a period of 72 h while free pellets lost completely within 24 h. Results of this kind therefore is interesting and promising for commercial scale production of L-DOPA from microbial sources.展开更多
基金Project (50975235) supported by the National Natural Science Foundation of ChinaProject (B08040) supported by the 111 Project
文摘In order to study the effects of the process parameters on springback and section deformation, a sensitivity analysis model was established based on the combination use of the multi-parameter sensitivity analysis method and the springback/section deformation prediction finite element model, and by using this model the sensitivities of the springback and the section deformation to process parameters were analyzed and compared. The results show that the most sensitive process conditions for springback angle are the boost speed and the pressure of pressure die, and the most sensitive process condition for section deformation is the number of cores. When the clamp force, the boost speed and the pressure of pressure die are utilized to control section deformation, the effect of these process parameters on springback should be considered. When the process parameters are mainly used to control springback, the effect of these process parameters on the section deformation should be always considered.
文摘The objective of this study is to improve the production of L-DOPA from fungal source like Aspergillus terreus that can be further used to large-scale commercial production of this important drug from microbial sources. L-DOPA, a dopamine precursor that can pass the blood-brain barrier, is presently the drug of choice for Parkinson＇s disease. Microbial production and isolation of L-DOPA from natural sources is yet to be achieved an economical process. In this study, the mycelial pellets ofAspergillus terreus 104 were entrapped in 2% calcium alginate and were studied for their capacity for L-3, 4-dihydroxyphenylalanine production. Results showed that the immobilized pellets produced L-DOPA to the extent of 0.74 mg·G^-1 biomass while the free pellets produced 0.8 mg·G^-1 biomass. Further, storage of immobilized pellets for 96 h at 4 ℃ resulted in the reduction of the original L-DOPA producing activity of the gel beads only 40% and that of free pellets lost completely. In order to improve the production yield, further experiments were designed. It was found that L-DOPA production could be prolonged with repeated batch wise use of immobilized mycelial pellets in calcium alginate retaining 80% of their L-DOPA producing capacity for a period of 72 h while free pellets lost completely within 24 h. Results of this kind therefore is interesting and promising for commercial scale production of L-DOPA from microbial sources.
