Variation in the surface heat flux on the north and south slopes of Mount Qomolangma

The distinctive conditions present on the north and south slopes of Mount Qomolangma,along with the intricate variations in the underlying surfaces,result in notable variations in the surface energy flux patterns of the two slopes.In this paper,data from TESEBS(Topographical Enhanced Surface Energy Balance System),remote sensing data from eight cloud-free scenarios,and observational data from nine stations are utilized to examine the fluctuations in the surface heat flux on both slopes.The inclusion of MCD43A3 satellite data enhances the surface albedo,contributing to more accurate simulation outcomes.The model results are validated using observational data.The RMSEs of the net radiation,ground heat,sensible heat,and latent heat flux are 40.73,17.09,33.26,and 30.91 W m^(−2),respectively.The net radiation flux is greater on the south slope and exhibits a rapid decline from summer to autumn.Due to the influence of the monsoon,on the north slope,the maximum sensible heat flux occurs in the pre-monsoon period in summer and the maximum latent heat flux occurs during the monsoon.The south slope experiences the highest latent heat flux in summer.The dominant flux on the north slope is sensible heat,while it is latent heat on the south slope.The seasonal variations in the ground heat flux are more pronounced on the south slope than on the north slope.Except in summer,the ground heat flux on the north slope surpasses that on the south slope.

Study of Flow and Heat Transfer in an Ejector-Driven Swirl Anti-Icing Chamber

The formation of ice on the leading edge of aircraft engines is a serious issue,as it can have catastrophic consequences.The Swirl Anti-Icing(SAI)system,driven by ejection,circulates hot fluid within a 360°annular chamber to heat the engine inlet lip surface and prevent icing.This study employs a validated Computational Fluid Dynamics(CFD)approach to study the impact of key geometric parameters of this system on flow and heat transfer characteristics within the anti-icing chamber.Additionally,the entropy generation rate and exergy efficiency are analyzed to assess the energy utilization in the system.The research findings indicate that,within the considered flow range,reducing the nozzle specific areaφfrom 0.03061 to 0.01083 can enhance the ejection coefficient by over 60.7%.This enhancement increases the air circulating rate,thereby intensifying convective heat transfer within the SAI chamber.However,the reduction inφalso leads to a significant increase in the required bleed air pressure and a higher entropy generation rate,indicating lower exergy efficiency.The nozzle angleθnotably affects the distribution of hot and cold spots on the lip surface of the SAI chamber.Increasingθfrom 0°to 20°reduces the maximum temperature difference on the anti-icing chamber surface by 60 K.

Genetic Analysis of Cold Tolerance at Seedling Stage and Heat Tolerance at Anthesis in Rice (Oryza sativa L.)

A set of 240 introgression lines derived from the advanced backcross population of a cross between a japonica cultivar,Xiushui 09,and an indica breeding line,IR2061,was developed to dissect QTLs affecting cold tolerance （CT） at seedling stage and heat tolerance （HT） at anthesis.Survival rate of seedlings （SRS） and spikelet fertility （SF）,the index traits of CT and HT,showed significant differences between the two parents under stresses.A total of four QTLs （qSRS1,qSRS7,qSRS11a and qSRS11b） for CT were identified on chromosomes 1,7,11,and the Xiushui 09 alleles increased SRS at all loci except qSRS7.Four QTLs for SF were identified on chromosomes 4,5,6,and 11.These QTLs could be classified into two major types based on their behaviors under normal and stress conditions.The first was QTL expressed only under normal condition;and the second QTL was apparently stress induced and only expressed under stress.Among them,two QTLs （qSF4 and qSF6） which reduced the trait difference between heat stress and normal conditions must have contributed to HT because of their obvious contribution to trait stability,and the IR2061 allele at the qSF6 and the Xiushui 09 allele at the qSF4 improved HT,respectively.No similar QTL was found between CT at seedling stage and HT at anthesis.Therefore,it is possible to breed a new variety with CT and HT by pyramiding the favorable CT-and HT-improved alleles at above loci from Xiushui 09 and IR2061,respectively,through marker-assisted selection （MAS）.

Integration of Low-level Waste Heat Recovery and Liquefied Nature Gas Cold Energy Utilization

Two novel thermal cycles based on Brayton cycle and Rankine cycle are proposed, respectively, which integrate the recovery of low-level waste heat and Liquefied Nature Gas （LNG） cold energy utilization for power generation. Cascade utilization of energy is realized in the two thermal cycles, where low-level waste heat,low-temperature exergy and pressure exergy of LNG are utilized efficiently through the system synthesis. The simulations are carried out using the commercial Aspen Plus 10.2, and the results are analyzed. Compared with the conventional Brayton cycle and Rankine cycle, the two novel cycles bring 60.94% and 60% in exergy efficiency, respectively and 53.08% and 52.31% in thermal efficiency, respectively.

Microstructure, cold rolling, heat treatment, and mechanical properties of Mg-Li alloys

The magnesium-lithium （Mg-Li） alloy exhibits two phase structures between 5.7wt% and 10.3wt% Li contents, consisting of the a （hcp） Mg-rich and the β （bcc） Li-rich phases, at room temperature. In the experiment, Mg-5Li-2Zn, Mg-9Li-2Zn, Mg-16Li-2Zn, Mg-22Li-2Zn, Mg-5Li-2Zn-2Ca, Mg-9Li-2Zn-2Ca, Mg-16Li-2Zn-2Ca, and Mg-22Li-2Zn-2Ca （wt%） were melted. During the melting process, the flux, which was composed of lithium chloride （LiCl） and lithium fluoride （LiF） in the proportion of 3：1 （mass ratio） and argon gas were used to protect the alloys from oxidation. The microstructure, mechanical properties, and cold-rolling workability of the wrought alloys were studied. The crystal grain of the alloys （adding Ga） is fine . The hardness of the studied alloys decreases with an increase in element Li. The density of the studied alloys is in the range of 1.187 to 1.617 g/cm^3. The reduction of the Mg-16Li-2Zn and Mg-22Li-2Zn alloys can exceed 85% at room temperature. The Mg-9Li-2Zn-2Ca alloy was heat treated at 300℃ for 8, 12, 16, and 24 h, respectively. The optimum heat treatment of the Mg-9Li-2Zn-2Ca alloy is 300℃×12h by metallographic observation and by studying the mechanical properties of the alloys.

Effects of sustained cold and heat stress on energy intake, growth and mitochondrial function of broiler chickens

To study the correlation of broiler chickens with energy intake, growth and mitochondrial function which exposed to sustained cold and heat stress and to find out the comfortable temperature, 288 broiler chickens（21-day with（748±26） g, 144 males and 144 females） were divided randomly into six temperature-controlled chambers. Each chamber contained six cages including eight AA broilers per cage, each cage as a repeat. After acclimation for one week（temperature, 21℃; relative humidity, 60%）, the temperature of each chamber was adjusted（finished within 1 h） respectively to 10, 14, 18, 22, 26, or 30℃（RH, 60%） for a 14-day experimental period. After treatment, gross energy intake（GEI）, metabolizable energy intake（MEI）, the ratio of MEI/BW, metabolizability, average daily gain（ADG）, the concentration of liver mitochondria protein and cytochrome c oxidase（CCO） were measured respectively. Our results confirmed that when the temperature over 26℃ for 14 days, GEI, MEI and CCO activities were decreased significantly（P〈0.05）, but the concentration of liver mitochondria protein was increased and metabolizability of broilers was not influenced（P〉0.05）. Compared with treatment for 14 days, the ratio of MEI/body weight（BW） were also decreased when the temperature over 26℃ after temperature stress for 7 days（P〈0.05）, meanwhile mitochondrial protein concentration was increased at 10℃ and CCO activity was not affected（P〉0.05）. Additionally at 22℃, the ADG reached the maximal value. When kept in uncomfortable temperatures for a long time, the ADG and CCO activities of broiler were reduced, which was accompanied by mitochondrial hyperplasia. In summary, our study focused on the performance of broilers during sustained cold and heat environmental temperatures ranging from 10 to 30℃. From the point of view of energy utilization, moreover, 22 to 26℃ is comfortable for 28–42 day s broilers. And these could provide the theoretical basis on the high efficient production.

Evolution of microstructure, phase composition, and tensile properties of severely cold deformed titanium metastable β alloy in rapid continuous heating

Influence of severe cold deformation of titanium alloy Ti-1.5%A1-6.8%Mo-4.5%Fe in metastable β condition on the evolution of phase composition, microstructure, and tensile properties during continuous rapid heating was studied. As-deformed alloy was characterized by quasi-amorphous single-phase β condition with an abnormal temperature dependence of electric resistance that was normalized after 48 h exposure at room temperature as a result of isothermal ω phase precipitation. Subsequent rapid heating with a rate of 5 ℃/s caused recovery and recrystallization. Tensile properties of the alloy after different treatments were determined and discussed.

Effect of heat treatment on microstructure and properties of single crystal copper cold-welded joints

With the means of electron backscattered diffraction(EBSD),mechanical properties test and digital eddy current metal conductivity,the single crystal copper cold-welded joint was tested and analyzed,the structure change of cold-welded joint and the effect of heat treating on the structure and property of cold-welded joint were discussed.The results show that:The deformation area of the single crystal copper cold welded joint is broken,the crystalline grain at the interface of the joint is refined,and the single crystal structure is still maintained in the base metal area.The hardness of the deformation area increases greatly,the conductivity of the joint does not change much,and the tensile strength of the joint reaches about 70%of that of the base metal.At the interface of the heat treating joint,the single crystal structure of the deformation area and the base metal area are destroyed,and the grains grow up at the interface and the orientation is different.The hardness of the joint interface is much lower than that of the non-heat treating joint,the electrical conductivity of the joint is good,and the tensile strength of the joint is higher than that of the base metal.

Experimental and Simulation Studies on Cold Welding Sealing Process of Heat Pipes

Sealing quality strongly affects heat pipe performance, but few studies focus on the process of heat pipe sealing. Cold welding sealing technology based on a stamping process is applied for heat pipe sealing. The bonding mechanism of the cold welding sealing process （CWSP） is investigated and compared with the experimental results obtained from the bonding interface analysis. An orthogonal experiment is conducted to observe the effects of various parameters, including the sealing gap, sealing length, sealing diameter, and sealing velocity on bonding strength. A method with the utilization of saturated vapor pressure inside a copper tube is proposed to evaluate bonding strength. A corresponding finite element model is developed to investigate the effects of sealing gap and sealing velocity on plastic deformation during the cold welding process. Effects of various parameters on the bonding strength are determined and it is found that the sealing gap is the most critical factor and that the sealing velocity contributes the least effect. The best parameter combination （AIB3CID3, with a 0.5 mm sealing gap, 6 mm sealing length, 3.8 mm sealing diameter, and 50 mm/s sealing velocity） is derived within the experimental parameters. Plastic deformation results derived from the finite element model are consistent with those from the experiment. The instruction for the CWSP of heat pipes and the design of sealing dies of heat pipes are provided.

Effects of a Traditional Japanese Medicine Goshajinkigan, Tokishigyakukagoshuyushokyoto on the Warm and Cold Sense Threshold and Peripheral Blood Flow

The purpose of this study was to investigate the effects of a traditional Japanese medicine Goshajinkigan (TJ-107) and Tokishigyakukagoshuyushokyoto (TJ-38) on warm sense threshold, cold sense threshold and the peripheral blood flow. 31 healthy volunteers (control group: 9people, TJ-107 group: 12 people, TJ-38group:10 people) were examined. Drugs administered 2.5 g a dose. Analysis was before and after 1 hour dosage. The warm and cold sense threshold in the thenar of the non-handedness site of these subjects was measured using a thermostimulator (Intercross-200, Intercross Co., Tokyo, Japan). The peripheral blood flow in the finger of the non-handedness site of these subjects was measured using a full-field laser perfusion imager (FLPI, Moor Instruments Ltd., England). Control: The vehicle had no significant effect on the warm sense threshold, cold sense threshold and the peripheral blood flow. TJ-107: The warm sense threshold and cold sense threshold were significantly decreased, and the reaction latency of cold sense was significantly shortening. The peripheral blood flow was significantly increased second and third finger at 115.6%, 119.3%, respectively. TJ-38: The cold sense threshold and the reaction latency of cold sense were significantly increased. The peripheral blood flow was significantly increased second and third finger with 114.3%, 112.8%, respectively. These results suggest that TJ-107 and TJ-38 have effects on the changed warm sense threshold, cold sense threshold and increased peripheral blood flow.

Therapeutic Actions of the Chinese Herbal Formulae with Cold and Heat Properties and Their Effects on Ultrastructures of Synoviocytes in Rats of the Collagen-Induced Arthritis

The therapeutic actions of Qing Luo Yin (QLY清络饮) with heat property and Wen Luo Yin (WLY温络饮) with cold property on pain, swelling of the ankle, arthritis index and ultrastructures of synoviocytes were compared in rats of type II collagen-induced arthritis (CIA), with tripterygium glycosidorum (TG) used as control. The results indicated that both QLY and WLY could reduce pain, swelling of the ankle and the arthritis index of CIA, and QLY had better effects in reducing the swelling of the ankle and controlling the secondary pathological lesions as compared with WLY. Investigation on the ultrastructures of synoviocytes indicated that both QLY and WLY could reduce the number of Golgi apparatus, rough surface endoplasmic reticulum, dense bodies, matrix filaments and vacuoles so as to suppress the excessive secretion of synoviocytes in rats of CIA.

Effect of vacuum heat treatment on microstructure and microhardness of cold sprayed Cu-4Cr-2Nb alloy coating

The effect of vacuum heat treatment on the microstructure and microhardness of cold-sprayed Cu-4%Cr-2%Nb alloy coating was investigated. The heat treatment was conducted under the temperatures from 250 ℃ to 950 ℃ with a step of 100 ℃ for 2 h. It was found that a dense thick Cu-4Cr-2Nb coating could be formed by cold spraying. After heat treatment, a Cr2Nb phase was uniformly distributed in the matrix, which was transferred from the gas-atomized feedstock. A little grain growth of Cr2Nb phase was observed accompanying with the healing-up of the incomplete interfaces between the deposited particles at the elevated temperatures. The coating microhardness increases a little with increasing the temperature to 350 ℃, and then decreases with further increasing temperature up to 950 ℃. This fact can be attributed to the microstructure evolution during the heat treatment.

Availability of Heat Conduction for Environmental Control Method to Improving Thermal Environment and Preventing Oversensitivity to Cold and Air-Conditioning Disease on Female Office Workers

The purpose of this study is to demonstrate the effect localized heating of the feet has on physiological and psychological reactions of female in an air-conditioned environment in summer. In Japan, female office workers wear less clothing than their male counterparts. In an air-conditioned office space in summer, female conducts thermoregulation by putting on cardigans, etc. but this action does not greatly contribute to improving conditions for the legs and feet, the lower extremities of the body. The improvement of sensational and physiological temperature by localized warming of the body can contribute to a healthy working environment for female office workers, their safety, and a reduction in air conditioning’s energy expenditure. We used the indoor thermal environment evaluation index ETF to investigate the effect localized heating of the feet has on human physiological and psychological response in an air-conditioned environment in summer. The result of heating by means of heat conduction via the sole of the foot was expressed more strongly as a psychological effect than as a whole-body physiological effect. Heating by means of heat conduction via the sole of the foot was a thermal environment factor that compensates for a low temperature in whole-body thermal sensation and whole-body thermal comfort. The effect of heating due to heat conduction via the sole of the foot was expressed in the change in sole-of- the-foot skin temperature. Applying slight heat conduction by means of heating via the sole of the foot demonstrated the result of improved whole-body thermal sensation and whole-body thermal comfort.

Recent Development and Application of Geothermal Heat Pump Systems in Cold-Climate Regions of the US: A Further Investigation

A Geothermal Heat Pump (GHP) system is known to have enormous potential for building energy savings and the reduction of associated greenhouse gas emissions, due to its high Coefficient Of Performance (COP). The use of a GHP system in cold-climate regions is more attractive owing to its higher COP for heating compared to conventional heating devices, such as furnaces or boilers. Many factors, however, determine the operational performance of an existing GHP system, such as control strategy, part/full-load efficiency, the age of the system, defective parts, and whether or not regular maintenance services are provided. The omitting of any of these factors in design and operation stages could have significant impacts on the normal operation of GHP systems. Therefore, the objectives of this paper are to further investigate and study the existing GHP systems currently used in buildings located in cold-climate regions of the US, in terms of system operational performance, potential energy and energy cost savings, system cost information, the reasons for installing geothermal systems, current operating difficulties, and owner satisfaction to date. After the comprehensive investigation and in-depth analysis of 24 buildings, the results indicate that for these buildings, about 75% of the building owners are very satisfied with their GHP systems in terms of noise, cost, and indoor comfort. About 71% of the investigated GHP systems have not had serious operating difficulties, and about 85% of the respondents (building owners) would suggest this type of system to other people. Compared to the national median of energy use and energy cost of typical buildings of the same type nationwide, the overall performance of the actual GHP systems used in the cold-climate regions is slightly better, i.e. about 7.2% energy savings and 6.1% energy cost savings on average.

An Assessment of Urban Heat Island Effect using Remote Sensing Data

Characteristics of urban heat island （UHI） effect and its cause are investigated by using MODIS data in April 2004. Surface parameters from the MODIS data have surface temperature （ts） albedo（α）, and normalized difference vegetation index （NDVI）. Their heterogeneities over urban and rural area are analyzed based on land cover classification, and their relations are also presented in order to explain the UHI effect. The results show that there exists obvious the UHI effect. Ts over urban areas are by 10.83 % higher than those over rural area, and NDVI and α over urban area are by 62 % and 18.75 % less than those over rural area, respectively. Surface temperature has significantly negative correlation with NDVI and their correlation coefficient is -0.73. Correlation between NDVI and albedo is determined by the spectrum of light. Difference in vegetation cover is the primary cause of the UHI effect.

Air-sea fluxes of heat and momentum over the Yellow Sea during cold air outbreaks

The impact of sea surface waves on air-sea fluxes of heat and momentum over the Yellow Sea caused by cold fronts during cold air outbreak(CAO)events is investigated through numerical experiments with a FVCOM-SWAVE(Finite-Volume Coastal Ocean Model-Surface WAVE)wave-current coupled model.Two typical types of cold fronts,i.e.,those respectively from the north and from the west,are simulated and compared to each other and with monthly mean.During cold seasons,currents in the Yellow Sea are weaker than that during warm seasons.As a result,waves show a more prominent impact.The numerical simulations suggested that both the heat and momentum fluxes are significantly enhanced during CAO events;and they could be a few times larger than the monthly average of a five-year mean.The enhancement is highly sensitive to the features of CAOs.Specifically,it depends on the cold front orientation,intensity and evolution.One mechanism that strengthens the two fluxes is via sea waves.For the CAOs that are studied,an increase in sea wave height by 50%can double the maximal momentum flux,and cause an increase in heat flux by 10-160 W/m^2.

INFLUENCE OF COLD-WORKING AND HEAT TREATING ON ELASTIC PROPERTIES OF Nb AND Nb-BASE ALLOYS

The elastic limit of single-phase alloy Nb-2Mo-2Zr-1Ti is higher as recovered state in comparison with as cold-rolled or recrystallized one.For Nb-40Ti-5.5AI alloy of age-hardening type,the elastic limit is lower as cold-rolled state,but increases considerably after proper aging.However,its elastic modulus changes no more,so the stored-energy (σ_e^2/E)may raise significantly.The temperature dependence on elastic modulus for pure Nb as intensely cold-worked or recrystallized state is anomalous.This anomaly may disap- pear after recovered treatment of intensely cold-worked state at 600℃ for 4 h.and may change no more after that of recrystallized state.The anomalous behaviour of elasticity was also discussed on the non-magnetic Nb.

Remote sensing of the urban heat island and its changes in Xiamen City of SE China

World-wide urbanization has significantly modified the landscape, which has important climatic implications across all scales due to the simultaneous removal of natural land cover and introduction of urban materials. This resulted in a phenomenon known as an urban heat island(UHI). A study on the UHI in Xiamen of China was carried out using remote sensing technology. Satellite thermal infrared images were used to determine surface radiant temperatures. Thermal remote sensing data were obtained from band 6 of two Landsat TM/ETM\++ images of 1989 and 2000 to observe the UHI changes over 11-year period. The thermal infrared bands were processed through several image enhancement technologies. This generated two 3-dimension-perspective images of Xiamen's urban heat island in 1989 and 2000, respectively, and revealed heat characteristics and spatial distribution features of the UHI. To find out the change of the UHI between 1989 and 2000, the two thermal images were first normalized and scaled to seven grades to reduce seasonal difference and then overlaid to produce a difference image by subtracting corresponding pixels. The difference image showed an evident development of the urban heat island in the 11 years. This change was due largely to the urban expansion with a consequent alteration in the ratio of sensible heat flux to latent heat flux. To quantitatively compare UHI, an index called Urban-Heat-Island Ratio Index(URI) was created. It can reveal the intensity of the UHI within the urban area. The calculation of the index was based on the ratio of UHI area to urban area. The greater the index, the more intense the UHI was. The calculation of the index for the Xiamen City indicated that the ratio of UHI area to urban area in 2000 was less than that in 1989. High temperatures in several areas in 1989 were reduced or just disappeared, such as those in old downtown area and Gulangyu Island. For the potential mitigation of the UHI in Xiamen, a long-term heat island reduction strategy of planting shade trees and using light-colored, highly reflective roof and paving materials should be included in the plans of the city planers, environmental managers and other decision-makers to improve the overall urban environment in the future.

Simulating canopy stomatal conductance of winter wheat and its distribution using remote sensing information

The canopy stomatal movement, a plant physiological process, generally occurs within leaves but its influence on exchange of CO2, water vapor, and sensible heat fluxes between atmosphere and terrestrial ecosystem. Many studies have documented that the interaction between leaf photosynthesis and canopy stomatal conductance is obvious. Thus, information on stomatal conductance is valuable in climate and ecosystem models. In current study, a newly developed model was adopted to calculate canopy stomatal conductance of winter wheat in Huang-Huai-Hai (H-H-H) Plain of China (31.5 - 42.7°N, 110.0 - 123.0°E). The remote sensing information from NOAA-AVHRR and meteorological observed data were used to estimate regional scale stomatal conductance distribution. Canopy stomatal conductance distribution pattern of winter wheat on March 18, 1997 was also presented. The developed canopy stomatal conductance model might be used to estimate canopy stomatal conductance in land surface schemes and seems can be acted as a boundary condition in regional climatic model runs.

Acclimation-dependent expression of heat shock protein 70 in Pacific abalone (Haliotis discus hannai Ino) and its acute response to thermal exposure

Heat shock protein 70 （Hsp70） is one important member of heat shock protein （Hsp） family that is responsible for various stresses, especially thermal stress. Here we examined the response of Hsp70 gene to both chronic and acute thermal exposure in Pacific abalone （Haliotis discus hannai Ino）. For the chronic exposure, abalones were maintained at 8, 12, 20, and 30∩ for four months and their mRNA levels were measured. The highest mRNA level of Hsp70 gene relative to actin gene was detected in the 30~C-acclimated group, followed by the 8~C-acclimated group and then the 12~C- and 20~C-acclimated groups. After the long-term acclimation, gills from each of the above acclimation groups were dissected and exposed to different temperatures between 8~C and 38~C for 30 min. Hsp70 expression in gills acclimated to different temperatures responded differentially to the same temperature exposure. The incubation temperature that induced maximum Hsp70 mRNA expression was higher in the higher temperature acclimation groups than lower temperature groups. Pacific abalones could alter the expression pattern of Hsp70 gene according to environmental thermal conditions, through which they deal with the stress of thermal variations.