[Objective] The aim was to investigate the differences in nitrification and denitrification activities and the N20 emission of orchard soils cultivated for different periods of time. [Method] Incubation experiment was...[Objective] The aim was to investigate the differences in nitrification and denitrification activities and the N20 emission of orchard soils cultivated for different periods of time. [Method] Incubation experiment was conducted to determine the ni- trification and denitrification activities and N20 emission of three types of orchard soil samples that had been cultivated for 5, 12 and 20 years, respectively, by using the virgin soil sample as control. [Result] After 26 d of incubation, the nitrification rates of nitrogen fertilizer in the virgin soil sample and the orchard soil samples cultivated for 5, 12 and 20 years were 6.85%, 10.26%, 13.29% and 12.90%, respectively, which were positively correlated with content of soil organic matter, ammonium nitro- gen and total nitrogen （P〈0.05）, and negatively correlated with soil carbon-nitrogen ratio and pH value （P〈0.05）. The denitrification activities of these soil samples in- creased with the increase of cultivation years. The amount of nitrogen loss by deni- trification accounted for 0.01%-3.11% of the amount of fertilizer nitrogen, and had a positive correlation with the content of soil organic matter （P〈0.05）. The N20 emis- sions of orchard soil samples were higher than that of the virgin soil samples （P〈 0.05）. [Conclusion] In South China, the nitrification activity of orchard soil is relatively low, but it has a tendency to increase as the cultivation years increases; the denitri- fication activity is relatively high, and increases significantly with the increase of culti- vation years.展开更多
In order to improve nitrogen removal in anoxic/oxic(A/O) process effectively for treating domestic wastewaters, the influence factors, DO(dissolved oxygen), nitrate recirculation, sludge recycle, SRT(solids residence ...In order to improve nitrogen removal in anoxic/oxic(A/O) process effectively for treating domestic wastewaters, the influence factors, DO(dissolved oxygen), nitrate recirculation, sludge recycle, SRT(solids residence time), influent COD/TN and HRT(hydraulic retention time) were studied. Results indicated that it was possible to increase nitrogen removal by using corresponding control strategies, such as, adjusting the DO set point according to effluent ammonia concentration; manipulating nitrate recirculation flow according to nitrate concentration at the end of anoxic zone. Based on the experiments results, a knowledge-based approach for supervision of the nitrogen removal problems was considered, and decision trees for diagnosing nitrification and denitrification problems were built and successfully applied to A/O process.展开更多
A field experiment was conducted on Chinese cabbage （Brassica campestris L. ssp. pekinensis （Lour.） Olsson） in a Nanjing suburb in 2003. The experiment included 4 treatments in a randomized complete block design w...A field experiment was conducted on Chinese cabbage （Brassica campestris L. ssp. pekinensis （Lour.） Olsson） in a Nanjing suburb in 2003. The experiment included 4 treatments in a randomized complete block design with 3 replicates： zero chemical fertilizer N （CK）; urea at rates of 300 kg N ha^-1 （U300） and 600 kg N ha^-1 （U600）, both as basal and two topdressings; and polymer-coated urea at a rate of 180 kg N ha^-1 （PCU180） as a basal application. The acetylene inhibition technique was used to measure denitrification （N2 ＋ N2O） from intact soil cores and N2O emissions in the absence of acetylene. Results showed that compared to （3K total denitrification losses were significantly greater （P ≤ 0.05） in the PCU180, U300, and U600 treatments,while N2O emissions in the U300 and U600 treatments were significantly higher （P ≤ 0.05） than （3K. In the U300 and U600 treatments peaks of denitrification and N2O emission were usually observed after N application. In the polymer-coated urea treatment （PCU180） during the period 20 to 40 days after transplanting, higher denitrification rates and N2O fluxes occurred. Compared with urea, polymer-coated urea did not show any effect on reducing denitrification losses and N2O emissions in terms of percentage of applied N. As temperature gradually decreased from transplanting to harvest, denitrification rates and N2O emissions tended to decrease. A significant （P ≤0.01） positive correlation occurred between denitrification （r = 0.872） or N2O emission （r = 0.781） flux densities and soil temperature in the CK treatment with a stable nitrate content during the whole growing season.展开更多
Soil denitrification was studied in wheat-maize rotation cropping system on an aquic cambisol. Results showed that the N loss amount by denitrification ranged from 4.7 to 9.7 kg per hectare with different levels of ni...Soil denitrification was studied in wheat-maize rotation cropping system on an aquic cambisol. Results showed that the N loss amount by denitrification ranged from 4.7 to 9.7 kg per hectare with different levels of nitrogen application and the key stage for denitification was during summer maize-growth-period, especially within 1-2 weeks after fertilizer nitrogen was applied. Similar trend was found between soil N2O production/emission dynamic and denitrification dynamic in the rotation system, which may indicate that mainly N2O is produced in nitrification process.展开更多
Magnetically recyclable porous sodium dodecyl sulfate(SDS)/Fe2O3 hybrids,which combine the porous structure of Fe2O3 and hydrophobicity of SDS,have been successfully synthesized for the first time.Porous Fe2O3 has bee...Magnetically recyclable porous sodium dodecyl sulfate(SDS)/Fe2O3 hybrids,which combine the porous structure of Fe2O3 and hydrophobicity of SDS,have been successfully synthesized for the first time.Porous Fe2O3 has been first pyrolyzed from MIL-100(Fe)using a simple two-step calcination route.Then,the obtained porous Fe2O3 nanoparticles have been self-assembled with SDS molecules and yielded hydrophobic SDS/Fe2O3 hybrids.The porous SDS/Fe2O3 hybrids have been demonstrated to be highly efficient for the denitrification of pyridine under visible light irradiation.The pyridine removal ratio has reached values as high as 100%after irradiation for 240 min.Combining the results of a series of experimental measurements,it was concluded that the superior photocatalytic performance of SDS/Fe2O3 hybrids could be attributed to(i)the fast electron transport owing to the unique porous structure of Fe2O3,(ii)the superior visible light absorption of Fe2O3 nanoparticles,and(iii)the“bridge molecule”role of SDS efficiently improving the separation and transfer across the interfacial domain of SDS/Fe2O3 of photogenerated electron-hole pairs.More significantly,after the catalytic reaction,the SDS/Fe2O3 hybrids could be easily recovered using magnets and reused during subsequent cycles,which indicated their stability and recyclability.展开更多
To improve the denitrification performance of carbon-based materials for sintering flue gas,we prepared a composite catalyst comprising coconut shell activated carbon(AC)modified by thermal oxidation air.The microstru...To improve the denitrification performance of carbon-based materials for sintering flue gas,we prepared a composite catalyst comprising coconut shell activated carbon(AC)modified by thermal oxidation air.The microstructure,the specific surface area,the pore volume,the crystal structure,and functional groups presented in the prepared Cu2O/AC catalysts were thoroughly characterized.By using scanning electron microscopy(SEM),nitrogen adsorption/desorption isotherms,Fourier-transform infrared(FTIR)spectroscopy and X-ray diffractometry(XRD),the effects of Cu2O loading and calcination temperature on Cu2O/AC catalysts were investigated at low temperature(150℃).The research shows that Cu on the Cu2O/AC catalyst is in the form of Cu2O with good crystalline performance and is spherical and uniformly dispersed on the AC surface.The loading of Cu2O increases the active sites and the specific surface area of the reaction gas contact,which is conducive to the rapid progress of the carbon monoxide selective catalytic reduction(CO-SCR)reaction.When the loading of Cu2O was 8%and the calcination temperature was 500℃,the removal rate of NOx facilitated by the Cu2O/AC catalyst reached 97.9%.These findings provide a theoretical basis for understanding the denitrification of sintering flue gas.展开更多
基金Supported by the Natural Science Foundation of Fujian(2008J0120)the Projects for the Nonprofit Specialized Research Institutes in Fujian Province(2009R10032-1,2010R1024-2)Youth Innovation Fund of Fujian Academy of Agricultural Sciences(2010QB-7),Key Project of Fujian Academy of Agricultural Sciences~~
文摘[Objective] The aim was to investigate the differences in nitrification and denitrification activities and the N20 emission of orchard soils cultivated for different periods of time. [Method] Incubation experiment was conducted to determine the ni- trification and denitrification activities and N20 emission of three types of orchard soil samples that had been cultivated for 5, 12 and 20 years, respectively, by using the virgin soil sample as control. [Result] After 26 d of incubation, the nitrification rates of nitrogen fertilizer in the virgin soil sample and the orchard soil samples cultivated for 5, 12 and 20 years were 6.85%, 10.26%, 13.29% and 12.90%, respectively, which were positively correlated with content of soil organic matter, ammonium nitro- gen and total nitrogen （P〈0.05）, and negatively correlated with soil carbon-nitrogen ratio and pH value （P〈0.05）. The denitrification activities of these soil samples in- creased with the increase of cultivation years. The amount of nitrogen loss by deni- trification accounted for 0.01%-3.11% of the amount of fertilizer nitrogen, and had a positive correlation with the content of soil organic matter （P〈0.05）. The N20 emis- sions of orchard soil samples were higher than that of the virgin soil samples （P〈 0.05）. [Conclusion] In South China, the nitrification activity of orchard soil is relatively low, but it has a tendency to increase as the cultivation years increases; the denitri- fication activity is relatively high, and increases significantly with the increase of culti- vation years.
文摘In order to improve nitrogen removal in anoxic/oxic(A/O) process effectively for treating domestic wastewaters, the influence factors, DO(dissolved oxygen), nitrate recirculation, sludge recycle, SRT(solids residence time), influent COD/TN and HRT(hydraulic retention time) were studied. Results indicated that it was possible to increase nitrogen removal by using corresponding control strategies, such as, adjusting the DO set point according to effluent ammonia concentration; manipulating nitrate recirculation flow according to nitrate concentration at the end of anoxic zone. Based on the experiments results, a knowledge-based approach for supervision of the nitrogen removal problems was considered, and decision trees for diagnosing nitrification and denitrification problems were built and successfully applied to A/O process.
基金Project supported by the National Natural Science Foundation of China (No. 40171048)the Science and Technique Key Project of the Tenth Five-Year Plan of China (No. 2002BA516A03)
文摘A field experiment was conducted on Chinese cabbage （Brassica campestris L. ssp. pekinensis （Lour.） Olsson） in a Nanjing suburb in 2003. The experiment included 4 treatments in a randomized complete block design with 3 replicates： zero chemical fertilizer N （CK）; urea at rates of 300 kg N ha^-1 （U300） and 600 kg N ha^-1 （U600）, both as basal and two topdressings; and polymer-coated urea at a rate of 180 kg N ha^-1 （PCU180） as a basal application. The acetylene inhibition technique was used to measure denitrification （N2 ＋ N2O） from intact soil cores and N2O emissions in the absence of acetylene. Results showed that compared to （3K total denitrification losses were significantly greater （P ≤ 0.05） in the PCU180, U300, and U600 treatments,while N2O emissions in the U300 and U600 treatments were significantly higher （P ≤ 0.05） than （3K. In the U300 and U600 treatments peaks of denitrification and N2O emission were usually observed after N application. In the polymer-coated urea treatment （PCU180） during the period 20 to 40 days after transplanting, higher denitrification rates and N2O fluxes occurred. Compared with urea, polymer-coated urea did not show any effect on reducing denitrification losses and N2O emissions in terms of percentage of applied N. As temperature gradually decreased from transplanting to harvest, denitrification rates and N2O emissions tended to decrease. A significant （P ≤0.01） positive correlation occurred between denitrification （r = 0.872） or N2O emission （r = 0.781） flux densities and soil temperature in the CK treatment with a stable nitrate content during the whole growing season.
文摘Soil denitrification was studied in wheat-maize rotation cropping system on an aquic cambisol. Results showed that the N loss amount by denitrification ranged from 4.7 to 9.7 kg per hectare with different levels of nitrogen application and the key stage for denitification was during summer maize-growth-period, especially within 1-2 weeks after fertilizer nitrogen was applied. Similar trend was found between soil N2O production/emission dynamic and denitrification dynamic in the rotation system, which may indicate that mainly N2O is produced in nitrification process.
基金supported by the National Natural Science Foundation of China(21603112,21806085)Natural Science Foundation of Fujian Province(2016J02692,2019J01837)+1 种基金Natural Science Foundation of Ningde Normal University(2018T03,2018Z02)the Program of Innovative Research Team in Science and Technology in Fujian Province University(IRTSTFJ)~~
文摘Magnetically recyclable porous sodium dodecyl sulfate(SDS)/Fe2O3 hybrids,which combine the porous structure of Fe2O3 and hydrophobicity of SDS,have been successfully synthesized for the first time.Porous Fe2O3 has been first pyrolyzed from MIL-100(Fe)using a simple two-step calcination route.Then,the obtained porous Fe2O3 nanoparticles have been self-assembled with SDS molecules and yielded hydrophobic SDS/Fe2O3 hybrids.The porous SDS/Fe2O3 hybrids have been demonstrated to be highly efficient for the denitrification of pyridine under visible light irradiation.The pyridine removal ratio has reached values as high as 100%after irradiation for 240 min.Combining the results of a series of experimental measurements,it was concluded that the superior photocatalytic performance of SDS/Fe2O3 hybrids could be attributed to(i)the fast electron transport owing to the unique porous structure of Fe2O3,(ii)the superior visible light absorption of Fe2O3 nanoparticles,and(iii)the“bridge molecule”role of SDS efficiently improving the separation and transfer across the interfacial domain of SDS/Fe2O3 of photogenerated electron-hole pairs.More significantly,after the catalytic reaction,the SDS/Fe2O3 hybrids could be easily recovered using magnets and reused during subsequent cycles,which indicated their stability and recyclability.
基金Open Fund of Key Laboratory of Ministry of Education for Metallurgical Emission Reduction and Comprehensive Utilization of Resources,China(No.JKF19-08)General Project of Science and Technology Plan of Yunnan Science and Technology Department,China(No.2019FB077)+1 种基金Industrialization Cultivation Project of Scientific Research Fund of Yunnan Provincial Department of Education,China(No.2016CYH07)Top Young Talents of Yunnan Ten Thousand Talents Plan,China(No.YNWR-QNBJ-2019-263)。
文摘To improve the denitrification performance of carbon-based materials for sintering flue gas,we prepared a composite catalyst comprising coconut shell activated carbon(AC)modified by thermal oxidation air.The microstructure,the specific surface area,the pore volume,the crystal structure,and functional groups presented in the prepared Cu2O/AC catalysts were thoroughly characterized.By using scanning electron microscopy(SEM),nitrogen adsorption/desorption isotherms,Fourier-transform infrared(FTIR)spectroscopy and X-ray diffractometry(XRD),the effects of Cu2O loading and calcination temperature on Cu2O/AC catalysts were investigated at low temperature(150℃).The research shows that Cu on the Cu2O/AC catalyst is in the form of Cu2O with good crystalline performance and is spherical and uniformly dispersed on the AC surface.The loading of Cu2O increases the active sites and the specific surface area of the reaction gas contact,which is conducive to the rapid progress of the carbon monoxide selective catalytic reduction(CO-SCR)reaction.When the loading of Cu2O was 8%and the calcination temperature was 500℃,the removal rate of NOx facilitated by the Cu2O/AC catalyst reached 97.9%.These findings provide a theoretical basis for understanding the denitrification of sintering flue gas.
