The influences of Ca and Ce/La microalloying on the microstructure evolution and bio-corrosion resistances of extruded Mg-Zn alloys have been systematically investigated in the current study.Compared with single Ca or...The influences of Ca and Ce/La microalloying on the microstructure evolution and bio-corrosion resistances of extruded Mg-Zn alloys have been systematically investigated in the current study.Compared with single Ca or Ce/La addition,the Ca-Ce/La cooperative microalloying results in an outstanding grain refinement,because the fine secondary phase particles effectively hinder the recrystallized grain growth.The coarse Ca2Mg6Zn3 phases promote the formation of Ca3(PO4)2 or hydroxyapatite particles during the immersion process and accelerate the dissolution of the corrosion product film,which destroys its integrity and results in the deterioration of anti-corrosive performance.The Ce/La elements can be dispersed within the conventional Mg7Zn3 phases,which reduce the internal galvanic corrosion between Mg matrix and the secondary phases,leading to an obvious improvement of corrosion resistance.Therefore,the Ca-Ce/La cooperative microalloying achieves a homogenous fine-grained microstructure and improves the protective ability of surface film,which will pave a new avenue for the design of biomedical Mg alloys in the coming future.展开更多
The influences of rare earth elements（cerium and lanthanum） on the microstructure and phases of Al-3.0 wt%Mg alloys used for electromagnetic shielding wire were characterized by scanning electron microscopy（SEM）, ...The influences of rare earth elements（cerium and lanthanum） on the microstructure and phases of Al-3.0 wt%Mg alloys used for electromagnetic shielding wire were characterized by scanning electron microscopy（SEM）, energy-dispersive spectroscopy（EDS）, X-ray diffraction（XRD） and differential scanning calorimetry（DSC）. The mechanical properties and electrical resistivity were also investigated. The results indicated that a certain content of rare earth could improve the purification of the aluminum molten, enhance the strength, and reduce the electrical resistivity of Al-3.0 wt%Mg alloys. The strength reached the top value when RE content was 0.3 wt% while the alloy with 0.2 wt% RE addition had the smallest electrical resistivity. The elongation varied little when RE addition was no more than 0.2 wt%. But the excessive addition of rare earth would be harmful to the microstructure and properties of Al-3.0 wt%Mg alloys.展开更多
Fe-La, Fe-Ce, Fe-La-P, Fe-Ce-P and Fe-P alloys were obtained f rom aqueous solutions by using optimized electroplaing solutions and process con ditions. The experimental results show that these alloys (Fe-La-P, Fe-Ce-...Fe-La, Fe-Ce, Fe-La-P, Fe-Ce-P and Fe-P alloys were obtained f rom aqueous solutions by using optimized electroplaing solutions and process con ditions. The experimental results show that these alloys (Fe-La-P, Fe-Ce- P and Fe-P) have amorphous structure. The crystallization activation energy a nd kinetics equation of three kinds amorphous coatings have been determined by D SC method. The results indicated that the crystallization activation energy of F e-P, Fe-La-P, Fe-Ce-P amorphous coatings are 175.2, 370.1, 434.6kJ·m ol-1 respectively. The crystallization mechamism of three kinds amorphous alloy s may be expressed by Avrami-Erofeev equation (n=1), the kinetics equation is .展开更多
基金the National Natural Science Foundation(Grant nos.5177117&51671152 and 51874225)the Key Research and Development Program of Shanxi Province(Grant nos.2020KWZ-007 and 2018ZDXMGY-149)the Youth Innovation Team of Shanxi Universities and the Natural Science Foundation of Jilin Province(Grant no.20180414016GH).
文摘The influences of Ca and Ce/La microalloying on the microstructure evolution and bio-corrosion resistances of extruded Mg-Zn alloys have been systematically investigated in the current study.Compared with single Ca or Ce/La addition,the Ca-Ce/La cooperative microalloying results in an outstanding grain refinement,because the fine secondary phase particles effectively hinder the recrystallized grain growth.The coarse Ca2Mg6Zn3 phases promote the formation of Ca3(PO4)2 or hydroxyapatite particles during the immersion process and accelerate the dissolution of the corrosion product film,which destroys its integrity and results in the deterioration of anti-corrosive performance.The Ce/La elements can be dispersed within the conventional Mg7Zn3 phases,which reduce the internal galvanic corrosion between Mg matrix and the secondary phases,leading to an obvious improvement of corrosion resistance.Therefore,the Ca-Ce/La cooperative microalloying achieves a homogenous fine-grained microstructure and improves the protective ability of surface film,which will pave a new avenue for the design of biomedical Mg alloys in the coming future.
基金Funded by the National Natural Science Foundation of China(No.51379070)the Fundamental Research Funds for the Central Universities(No.2017B40314)
文摘The influences of rare earth elements（cerium and lanthanum） on the microstructure and phases of Al-3.0 wt%Mg alloys used for electromagnetic shielding wire were characterized by scanning electron microscopy（SEM）, energy-dispersive spectroscopy（EDS）, X-ray diffraction（XRD） and differential scanning calorimetry（DSC）. The mechanical properties and electrical resistivity were also investigated. The results indicated that a certain content of rare earth could improve the purification of the aluminum molten, enhance the strength, and reduce the electrical resistivity of Al-3.0 wt%Mg alloys. The strength reached the top value when RE content was 0.3 wt% while the alloy with 0.2 wt% RE addition had the smallest electrical resistivity. The elongation varied little when RE addition was no more than 0.2 wt%. But the excessive addition of rare earth would be harmful to the microstructure and properties of Al-3.0 wt%Mg alloys.
文摘Fe-La, Fe-Ce, Fe-La-P, Fe-Ce-P and Fe-P alloys were obtained f rom aqueous solutions by using optimized electroplaing solutions and process con ditions. The experimental results show that these alloys (Fe-La-P, Fe-Ce- P and Fe-P) have amorphous structure. The crystallization activation energy a nd kinetics equation of three kinds amorphous coatings have been determined by D SC method. The results indicated that the crystallization activation energy of F e-P, Fe-La-P, Fe-Ce-P amorphous coatings are 175.2, 370.1, 434.6kJ·m ol-1 respectively. The crystallization mechamism of three kinds amorphous alloy s may be expressed by Avrami-Erofeev equation (n=1), the kinetics equation is .
