The Al-Mg-Mn alloy sheets with and without trace Sc and Zr were investigated by means of tensile test,X-ray diffraction,optical microscope,and transmission electron microscope.The indexes of in-plane anisotropy(IIPA)o...The Al-Mg-Mn alloy sheets with and without trace Sc and Zr were investigated by means of tensile test,X-ray diffraction,optical microscope,and transmission electron microscope.The indexes of in-plane anisotropy(IIPA)of their tensile mechanical properties were calculated and their inverse pole figures were obtained by Harris method.The two alloy sheets have the same law of in-plane anisotropy and remarkable in-plane anisotropy of mechanical properties,and the IIPA of the alloy sheet with Sc and Zr is bigger than that of the alloy sheet without Sc and Zr.The relationships of the in-plane anisotropy and the anisotropy of the crystallographic texture were analyzed based on the model of monocrystal.It is the common action of the anisotropy of crystallography and microstructures that causes the in-plane anisotropy of their mechanical properties,but the major cause is the{110}〈112〉crystallographic texture.The trace Sc and Zr can promote the formation and stabilization of the{110}〈112〉texture,inhibit the formation of the{100}〈001〉texture,and increase the in-plane anisotropy of the alloy sheet containing trace Sc and Zr.展开更多
Alloying elements, present in the aluminum solid solution or the precipitates, influence the corrosion resistance of A1-Mg-Mn-Zn alloys. In this study, sensi- tizing treatment was applied to an A1-Mg-Mn-Zn alloy to mo...Alloying elements, present in the aluminum solid solution or the precipitates, influence the corrosion resistance of A1-Mg-Mn-Zn alloys. In this study, sensi- tizing treatment was applied to an A1-Mg-Mn-Zn alloy to modify the precipitation at the grain boundaries or in the grains. Transmission electron microscopy （TEM） and scanning electron microscope （SEM） were used to characterize various second-phase particles and determine their orientation relationship with the A1 matrix. After sensitizing treatment, z-phase （Mg32（Al, Zn）49） is observed to precipitate along the grain boundaries in a coarser size, producing a discontinuous grain boundary precipitate structure. In addition, Mn-rich particles are found to form with various shapes, such as global, plate and rhombus.展开更多
基金This work was financially supported by the National Key Fundamental Research Development Program(No.G1999064911).
文摘The Al-Mg-Mn alloy sheets with and without trace Sc and Zr were investigated by means of tensile test,X-ray diffraction,optical microscope,and transmission electron microscope.The indexes of in-plane anisotropy(IIPA)of their tensile mechanical properties were calculated and their inverse pole figures were obtained by Harris method.The two alloy sheets have the same law of in-plane anisotropy and remarkable in-plane anisotropy of mechanical properties,and the IIPA of the alloy sheet with Sc and Zr is bigger than that of the alloy sheet without Sc and Zr.The relationships of the in-plane anisotropy and the anisotropy of the crystallographic texture were analyzed based on the model of monocrystal.It is the common action of the anisotropy of crystallography and microstructures that causes the in-plane anisotropy of their mechanical properties,but the major cause is the{110}〈112〉crystallographic texture.The trace Sc and Zr can promote the formation and stabilization of the{110}〈112〉texture,inhibit the formation of the{100}〈001〉texture,and increase the in-plane anisotropy of the alloy sheet containing trace Sc and Zr.
基金financially supported by the National Natural Science Foundation of China (No.51301017)the Common Construction Project from Beijing Municipal Commission of Education
文摘Alloying elements, present in the aluminum solid solution or the precipitates, influence the corrosion resistance of A1-Mg-Mn-Zn alloys. In this study, sensi- tizing treatment was applied to an A1-Mg-Mn-Zn alloy to modify the precipitation at the grain boundaries or in the grains. Transmission electron microscopy （TEM） and scanning electron microscope （SEM） were used to characterize various second-phase particles and determine their orientation relationship with the A1 matrix. After sensitizing treatment, z-phase （Mg32（Al, Zn）49） is observed to precipitate along the grain boundaries in a coarser size, producing a discontinuous grain boundary precipitate structure. In addition, Mn-rich particles are found to form with various shapes, such as global, plate and rhombus.
