The preparation process-dependent phase morphology of blends composed of nylon 6 and acrylonitrile-butadiene- styrene(ABS)over a composition range of 30-70 wt% using a styrene-maleic anhydride(SMA)copolymer as the com...The preparation process-dependent phase morphology of blends composed of nylon 6 and acrylonitrile-butadiene- styrene(ABS)over a composition range of 30-70 wt% using a styrene-maleic anhydride(SMA)copolymer as the compatibilizing agent with a constant content(5phr)was investigated.The results of the scanning electron microscope (SEM)observation revealed that compared with the binary blends of nylon 6 and ABS,the existence of SMA caused a composition shift of phase inversion to a higher weight fraction of ny...展开更多
A series of blends of Acrylonitrile-Butadiene-Styrene (ABS) and Polycarbonate (PC) were prepared and some of their thermal and mechanical properties were determined. The Young’s modulus changed gradually and monotoni...A series of blends of Acrylonitrile-Butadiene-Styrene (ABS) and Polycarbonate (PC) were prepared and some of their thermal and mechanical properties were determined. The Young’s modulus changed gradually and monotonically with the polycarbonate content. This effect was tentatively explained as the antiplasticization of the PC which is ascribed to the chain mobility, which permits the PC chains to pack more tightly, to the secondary cross-linking between the PC chains, or to the secondary attachment of bulky side-chains to the PC, thus producing steric hindrance to the rotation of the PC main chains. The experimental values found for the impact strength were intermediate between those of the neat polymers, depending upon the dispersed rubber particles of butadiene in the matrix of SAN (Styrene-Acrylonitrile), and the dispersed PC particles which generally make the ABS more brittle. A maximum value of about 88 KJ/m2 for the impact strength was observed for the blend with 90% PC. This may be attributed to the strong polymer-polymer interactions for this particular composition. The variations in the heat deflection temperature HDT and the Vicat softening point with the blend composition were very similar, and allowed us to assume that the phase inversion between the matrices of the two polymers takes place at 50% PC. The morphology of the blends revealed by SEM observation, show a co-continuous structure.展开更多
This paper experimentally studies the tensile deformation behavior of poly- carbonate （PC）, acrylonitrile-butadiene-styrene （ABS）, and PC/ABS blends （with the blending ratios of PC to ABS being 80：20, 60：40, 50...This paper experimentally studies the tensile deformation behavior of poly- carbonate （PC）, acrylonitrile-butadiene-styrene （ABS）, and PC/ABS blends （with the blending ratios of PC to ABS being 80：20, 60：40, 50：50, and 40：60） from low to high strain rates. Using the universal MTS-810 machine and the split Hopkinson tension bar （SHTB） testing system, the quasi-static and impact tension tests are carried out at the room temperature. The curves of the true stress and the true strain are obtained. The deformation behaviors of PC, ABS, and PC/ABS blends are characterized in detail. The linear relationship between the strain rate and the yielding stress is given.展开更多
Series of PVC/ABS and PVC/SBS blends of composition 20/ 80. 40/ 60, 60 / 40 and 80 / 20were prepared in a screw extruder. The phase morphology, miscibility and rheological behaviour of two systems were investigated. T...Series of PVC/ABS and PVC/SBS blends of composition 20/ 80. 40/ 60, 60 / 40 and 80 / 20were prepared in a screw extruder. The phase morphology, miscibility and rheological behaviour of two systems were investigated. The viscosity-composition plots were represented by sub-cluster equation, the various differences between two systems are interpreted with the equation parameters展开更多
基金This work was supported by the National Science Funds for GuiZhou Province Science Projects(No.GY-2005-3036)the Special Funds for Major State Basic Research Projects(No.2005CB623802).
文摘The preparation process-dependent phase morphology of blends composed of nylon 6 and acrylonitrile-butadiene- styrene(ABS)over a composition range of 30-70 wt% using a styrene-maleic anhydride(SMA)copolymer as the compatibilizing agent with a constant content(5phr)was investigated.The results of the scanning electron microscope (SEM)observation revealed that compared with the binary blends of nylon 6 and ABS,the existence of SMA caused a composition shift of phase inversion to a higher weight fraction of ny...
文摘A series of blends of Acrylonitrile-Butadiene-Styrene (ABS) and Polycarbonate (PC) were prepared and some of their thermal and mechanical properties were determined. The Young’s modulus changed gradually and monotonically with the polycarbonate content. This effect was tentatively explained as the antiplasticization of the PC which is ascribed to the chain mobility, which permits the PC chains to pack more tightly, to the secondary cross-linking between the PC chains, or to the secondary attachment of bulky side-chains to the PC, thus producing steric hindrance to the rotation of the PC main chains. The experimental values found for the impact strength were intermediate between those of the neat polymers, depending upon the dispersed rubber particles of butadiene in the matrix of SAN (Styrene-Acrylonitrile), and the dispersed PC particles which generally make the ABS more brittle. A maximum value of about 88 KJ/m2 for the impact strength was observed for the blend with 90% PC. This may be attributed to the strong polymer-polymer interactions for this particular composition. The variations in the heat deflection temperature HDT and the Vicat softening point with the blend composition were very similar, and allowed us to assume that the phase inversion between the matrices of the two polymers takes place at 50% PC. The morphology of the blends revealed by SEM observation, show a co-continuous structure.
基金supported by the National Natural Science Foundation of China (No. 11142004)the Shang-hai Leading Academic Discipline Project (No. S30106)the Innovative Foundation of Shanghai University
文摘This paper experimentally studies the tensile deformation behavior of poly- carbonate （PC）, acrylonitrile-butadiene-styrene （ABS）, and PC/ABS blends （with the blending ratios of PC to ABS being 80：20, 60：40, 50：50, and 40：60） from low to high strain rates. Using the universal MTS-810 machine and the split Hopkinson tension bar （SHTB） testing system, the quasi-static and impact tension tests are carried out at the room temperature. The curves of the true stress and the true strain are obtained. The deformation behaviors of PC, ABS, and PC/ABS blends are characterized in detail. The linear relationship between the strain rate and the yielding stress is given.
文摘Series of PVC/ABS and PVC/SBS blends of composition 20/ 80. 40/ 60, 60 / 40 and 80 / 20were prepared in a screw extruder. The phase morphology, miscibility and rheological behaviour of two systems were investigated. The viscosity-composition plots were represented by sub-cluster equation, the various differences between two systems are interpreted with the equation parameters
