A novel operation control method for relay protection in flexible DC distribution networks with distributed power supply is proposed to address the issue of inaccurate fault location during relay protection,leading to...A novel operation control method for relay protection in flexible DC distribution networks with distributed power supply is proposed to address the issue of inaccurate fault location during relay protection,leading to poor performance.The method combines a fault-tolerant fault location method based on long-term and short-term memory networks to accurately locate the fault section.Then,an operation control method for relay protection based on adaptive weight and whale optimization algorithm(WOA)is used to construct an objective function considering the shortest relay protection action time and the smallest impulse current.The adaptive weight and WOA are employed to obtain the optimal strategy for relay protection operation control,reducing the action time and impulse current.Experimental results demonstrate the effectiveness of the proposed method in accurately locating faults and improving relay protection performance.The longest operation time is reduced by 4.7023 s,and the maximum impulse current is limited to 0.3 A,effectively controlling the impact of large impulse currents and enhancing control efficiency.展开更多
This paper presents a novel transformer magnetic biasing control method for high-power high-performance AC power supplies. Serious consequences due to magnetic biasing and several methods to overcome magnetic biasing ...This paper presents a novel transformer magnetic biasing control method for high-power high-performance AC power supplies. Serious consequences due to magnetic biasing and several methods to overcome magnetic biasing are first discussed. The causes of the transformer magnetic biasing are then analyzed in detail. The proposed method is based on a high-pass filter inserted in the forward path and the feedforward control. Without testing magnetic biasing of transformer, this method can eliminate magnetic biasing of transformer completely in real-time waveform feedback control systems though the zero error of the Hall effect sensors varies with time and temperature. The method has already been employed in a 90KVA AC power supply. It is shown that it offers improved performance over existing ones. In this method, no sensors are used such that the zero error of the Hall effect sensors has not any influence on the system. It is simple to design and implement. Furthermore, the method is suitable for various power applications.展开更多
To meet the stringent requirements of the fusion power supply for large-scale fusion devices,the J-TEXT engineering team has carried out key technology research and applications in several important directions of fusi...To meet the stringent requirements of the fusion power supply for large-scale fusion devices,the J-TEXT engineering team has carried out key technology research and applications in several important directions of fusion power supply.This article presents the advances made by the J-TEXT engineering team in recent years in the following areas:(1) a high-voltage power supply for an auxiliary heating system;(2) a breakdown protection device for an auxiliary heating power supply;(3) magnetic field compatibility;(4) a high-voltage pulsed power supply for a fieldreversed configuration;(5) a large physics experimental facility control system.The research backgrounds,technical progress,test results,applications,summaries and prospects are described in detail in each part.These innovative research results and valuable engineering experience can promote the progress of fusion power supply technology,and also lay a foundation for the development of power supplies with higher parameters in the future.展开更多
In recent years, a large number of high voltage direct current(HVDC) transmission projects have been connected to AC systems. This has started to have an impact on AC/DC hybrid power grids, particularly receiving term...In recent years, a large number of high voltage direct current(HVDC) transmission projects have been connected to AC systems. This has started to have an impact on AC/DC hybrid power grids, particularly receiving terminal power grids. An HVDC system is a large-scale power electronic integrated nonlinear system, and it includes a primary system and a control and protection system. Hence, the precision and degree of detail of HVDC systems directly affect the actual effect of simulation. In recent years, in the case of the normal operation and failure of AC power grids, the abnormal fluctuation and even locking of HVDC systems caused by the inappropriate strategies of the control and protection system component have strongly affected power grids. This has significantly affected the safety and stability of receiving power grids and normal operation. In this study, the actual engineering HVDC control logic provided by a manufacturer is analyzed and simulated based on the user defined component library of the ADPSS electromagnetic transient calculation program, and an HVDC control model based on an actual system is established. The accuracy of the DC control custom model based on ADPSS is verified through the simulation of an actual power grid.展开更多
AC 25 kV供电市域动车组的供电系统吸纳了城际动车组技术,运营性能需满足公交化运营要求。文章通过系统分析,提出了市域动车组高压系统、牵引系统、制动系统、车门系统等主要系统的设计原则和控制策略,以期为市域动车组的高性能运营提...AC 25 kV供电市域动车组的供电系统吸纳了城际动车组技术,运营性能需满足公交化运营要求。文章通过系统分析,提出了市域动车组高压系统、牵引系统、制动系统、车门系统等主要系统的设计原则和控制策略,以期为市域动车组的高性能运营提供顶层技术支撑和有效的控制技术保障。展开更多
文摘A novel operation control method for relay protection in flexible DC distribution networks with distributed power supply is proposed to address the issue of inaccurate fault location during relay protection,leading to poor performance.The method combines a fault-tolerant fault location method based on long-term and short-term memory networks to accurately locate the fault section.Then,an operation control method for relay protection based on adaptive weight and whale optimization algorithm(WOA)is used to construct an objective function considering the shortest relay protection action time and the smallest impulse current.The adaptive weight and WOA are employed to obtain the optimal strategy for relay protection operation control,reducing the action time and impulse current.Experimental results demonstrate the effectiveness of the proposed method in accurately locating faults and improving relay protection performance.The longest operation time is reduced by 4.7023 s,and the maximum impulse current is limited to 0.3 A,effectively controlling the impact of large impulse currents and enhancing control efficiency.
文摘This paper presents a novel transformer magnetic biasing control method for high-power high-performance AC power supplies. Serious consequences due to magnetic biasing and several methods to overcome magnetic biasing are first discussed. The causes of the transformer magnetic biasing are then analyzed in detail. The proposed method is based on a high-pass filter inserted in the forward path and the feedforward control. Without testing magnetic biasing of transformer, this method can eliminate magnetic biasing of transformer completely in real-time waveform feedback control systems though the zero error of the Hall effect sensors varies with time and temperature. The method has already been employed in a 90KVA AC power supply. It is shown that it offers improved performance over existing ones. In this method, no sensors are used such that the zero error of the Hall effect sensors has not any influence on the system. It is simple to design and implement. Furthermore, the method is suitable for various power applications.
基金supported by the National Key Research and Development Program of China(Nos.2017YFE0300104 and 2017YFE0301803)National Natural Science Foundation of China(No.51821005)
文摘To meet the stringent requirements of the fusion power supply for large-scale fusion devices,the J-TEXT engineering team has carried out key technology research and applications in several important directions of fusion power supply.This article presents the advances made by the J-TEXT engineering team in recent years in the following areas:(1) a high-voltage power supply for an auxiliary heating system;(2) a breakdown protection device for an auxiliary heating power supply;(3) magnetic field compatibility;(4) a high-voltage pulsed power supply for a fieldreversed configuration;(5) a large physics experimental facility control system.The research backgrounds,technical progress,test results,applications,summaries and prospects are described in detail in each part.These innovative research results and valuable engineering experience can promote the progress of fusion power supply technology,and also lay a foundation for the development of power supplies with higher parameters in the future.
基金supported by National Key Research and Development Program of China-High performance analysis and situational awareness technology for interconnected power grids
文摘In recent years, a large number of high voltage direct current(HVDC) transmission projects have been connected to AC systems. This has started to have an impact on AC/DC hybrid power grids, particularly receiving terminal power grids. An HVDC system is a large-scale power electronic integrated nonlinear system, and it includes a primary system and a control and protection system. Hence, the precision and degree of detail of HVDC systems directly affect the actual effect of simulation. In recent years, in the case of the normal operation and failure of AC power grids, the abnormal fluctuation and even locking of HVDC systems caused by the inappropriate strategies of the control and protection system component have strongly affected power grids. This has significantly affected the safety and stability of receiving power grids and normal operation. In this study, the actual engineering HVDC control logic provided by a manufacturer is analyzed and simulated based on the user defined component library of the ADPSS electromagnetic transient calculation program, and an HVDC control model based on an actual system is established. The accuracy of the DC control custom model based on ADPSS is verified through the simulation of an actual power grid.
