The China Spallation Neutron Source （CSNS） is a high intensity proton accelerator based facility. Its accelerator complex includes two main parts： an H- linac and a rapid cycling synchrotron （RCS）. The RCS accumu...The China Spallation Neutron Source （CSNS） is a high intensity proton accelerator based facility. Its accelerator complex includes two main parts： an H- linac and a rapid cycling synchrotron （RCS）. The RCS accumulates the 80 MeV proton beam and accelerates it to 1.6 GeV, with a repetition rate of 25 Hz. The AC dipole of the CSNS/RCS is operated at a 25 Hz sinusoidal alternating current which causes severe vibration. The vibration will influence the long-term safety and reliable operation of the magnet. The dipole magnet of CSNS/RCS is an active vibration equipment, which is different from the ground vibration accelerator. It is very important to design and study the dynamic characteristics of the dipole-girder system. This paper takes the AC dipole and girder as a specific model system. A method for studying the dynamic characteristics of the system is put forward by combining theoretical calculation with experimental testing. The ANSYS simulation method plays a very important role in the girder structure design stage. With this method, the mechanical resonance phenomenon was avoided in the girder design time. At the same time the dipole vibratory force will influence the other equipment through the girder. Since it is necessary to isolate and decrease the dipole vibration, a new isolator was designed to isolate the vibratory force and decrease the vibration amplitude of the magnet.展开更多
China Spallation Neutron Source （CSNS） is a high intensity proton accelerator-based facility. Its acceler- ator complex includes two main parts： an H- linac and a rapid cycling synchrotron （RCS）. The RCS accumula...China Spallation Neutron Source （CSNS） is a high intensity proton accelerator-based facility. Its acceler- ator complex includes two main parts： an H- linac and a rapid cycling synchrotron （RCS）. The RCS accumulates an 80 MeV proton beam and accelerates it to 1.6 GeV, with a repetition rate of 25 Hz. The AC dipole of the CSNS/RCS is operated at a 25 Hz sinusoidal alternating current which causes severe vibration. The vibration will influence the long-term safety and reliable operation of the magnet. The CSNS/RCS AC dipole-girder system takes vibration isolator to decrease the vibratory force and the vibration amplitude of the dipole. For the long-term safety and reliable operation of the dipole, it is very important to study the dynanfic characteristics of the dipole-girder system. This paper takes the dipole-girder as a specific model system. A method for studying the dynamic characteristics of the system is put forward by combining theoretical calculation with experimental testing. The modal parameters with and without vibration isolator of the dipole-girder system are obtained through ANSYS simulation and testing. Then, the dynamic response of the system is calculated with modal analysis and vibration testing data. With the simulation and testing method, the dynamic characteristics of the AC dipole-girder are studied.展开更多
文摘The China Spallation Neutron Source （CSNS） is a high intensity proton accelerator based facility. Its accelerator complex includes two main parts： an H- linac and a rapid cycling synchrotron （RCS）. The RCS accumulates the 80 MeV proton beam and accelerates it to 1.6 GeV, with a repetition rate of 25 Hz. The AC dipole of the CSNS/RCS is operated at a 25 Hz sinusoidal alternating current which causes severe vibration. The vibration will influence the long-term safety and reliable operation of the magnet. The dipole magnet of CSNS/RCS is an active vibration equipment, which is different from the ground vibration accelerator. It is very important to design and study the dynamic characteristics of the dipole-girder system. This paper takes the AC dipole and girder as a specific model system. A method for studying the dynamic characteristics of the system is put forward by combining theoretical calculation with experimental testing. The ANSYS simulation method plays a very important role in the girder structure design stage. With this method, the mechanical resonance phenomenon was avoided in the girder design time. At the same time the dipole vibratory force will influence the other equipment through the girder. Since it is necessary to isolate and decrease the dipole vibration, a new isolator was designed to isolate the vibratory force and decrease the vibration amplitude of the magnet.
文摘China Spallation Neutron Source （CSNS） is a high intensity proton accelerator-based facility. Its acceler- ator complex includes two main parts： an H- linac and a rapid cycling synchrotron （RCS）. The RCS accumulates an 80 MeV proton beam and accelerates it to 1.6 GeV, with a repetition rate of 25 Hz. The AC dipole of the CSNS/RCS is operated at a 25 Hz sinusoidal alternating current which causes severe vibration. The vibration will influence the long-term safety and reliable operation of the magnet. The CSNS/RCS AC dipole-girder system takes vibration isolator to decrease the vibratory force and the vibration amplitude of the dipole. For the long-term safety and reliable operation of the dipole, it is very important to study the dynanfic characteristics of the dipole-girder system. This paper takes the dipole-girder as a specific model system. A method for studying the dynamic characteristics of the system is put forward by combining theoretical calculation with experimental testing. The modal parameters with and without vibration isolator of the dipole-girder system are obtained through ANSYS simulation and testing. Then, the dynamic response of the system is calculated with modal analysis and vibration testing data. With the simulation and testing method, the dynamic characteristics of the AC dipole-girder are studied.
