New Adaptive Cruise Control Method

A new adaptive cruise control (ACC) method based on the desired safety headway distance is investigated for improving the vehicle traffic safety at high speed by regulating the additional throttle opening and braking torque of driving wheels only. The selection of headway distance sensors, the determination of desired safety headway distance and desired deceleration are elaborated. The ACC flowchart and simulation, as well as signal misinformation and its resolutions are described. The simulation proves that the new ACC method is simpler and feasible. The new method is easily integrated ACC with ABS/ASR to form an organic ABS/ASR/ACC system.

Longitudinal Control Strategy for Vehicle Adaptive Cruise Control Systems

A new longitudinal control strategy for vehicle adaptive cruise control （ACC） systems is presented. The running relationship between the ACC vehicle and the detected target vehicle is described by the relative velocity and the deviation between the actual headway distance and the prescribed safety distance. Based on this, two state space models are built and the linear quadratic optimal control theory is used to yield desired velocity for the ACC-equipped vehicle when with the target vehicle detected. By switching among four control modes, the desired velocity profile is designed to deal with different running situations. A velocity controller, which includes a PID controller for throttle openness and a neural network controller for brake application, is developed to achieve the desired velocity profile. The proposed control strategy is applied to a non-linear vehicle model in a simulation environment and is shown to provide the ACC vehicle comfortable ride and satisfying safety.

Research on Directly Adaptive Fuzzy Algorithm Based ACC Controller

A directly adaptive fuzzy algorithm is applied in vehicle adaptive cruise control system. The basic principle of the adaptive fuzzy algorithm is analyzed. The initial value of the fuzzy based vector is given by the traditional fuzzy membership. Adaptive law of the adjustable parameters 6 is also determined. The directly adaptive fuzzy ACC controller is designed based on Matlab fuzzy toolbox. Matlab-Simulink is adopted to test the function of the adaptive fuzzy ACC controller. The control system is established using a 7 DOF vehicle dynamics model. Simulation results indicate that the principle of the method is correct and it performs well both in cruise and distance keeping.

Enhancing Safety in Autonomous Vehicle Navigation:An Optimized Path Planning Approach Leveraging Model Predictive Control

This paper explores the application of Model Predictive Control(MPC)to enhance safety and efficiency in autonomous vehicle(AV)navigation through optimized path planning.The evolution of AV technology has progressed rapidly,moving from basic driver-assistance systems(Level 1)to fully autonomous capabilities(Level 5).Central to this advancement are two key functionalities:Lane-Change Maneuvers(LCM)and Adaptive Cruise Control(ACC).In this study,a detailed simulation environment is created to replicate the road network between Nantun andWuri on National Freeway No.1 in Taiwan.The MPC controller is deployed to optimize vehicle trajectories,ensuring safe and efficient navigation.Simulated onboard sensors,including vehicle cameras and millimeterwave radar,are used to detect and respond to dynamic changes in the surrounding environment,enabling real-time decision-making for LCM and ACC.The simulation resultshighlight the superiority of the MPC-based approach in maintaining safe distances,executing controlled lane changes,and optimizing fuel efficiency.Specifically,the MPC controller effectively manages collision avoidance,reduces travel time,and contributes to smoother traffic flow compared to traditional path planning methods.These findings underscore the potential of MPC to enhance the reliability and safety of autonomous driving in complex traffic scenarios.Future research will focus on validating these results through real-world testing,addressing computational challenges for real-time implementation,and exploring the adaptability of MPC under various environmental conditions.This study provides a significant step towards achieving safer and more efficient autonomous vehicle navigation,paving the way for broader adoption of MPC in AV systems.

Vehicle Dynamics Modeling and Simulation for ACC

A 7 degree-of-freedom （DOF） 4 wheels vehicle dynamics model based on Matlab-Simulink is established,and 7 DOF vehicle dynamics equations in the form of nonlinear state-space standards are given.The characters of the electronic throttle and the active braking system have been analyzed.And the electronic throttle model and the active braking system model are built according to the test results respectively.Off-line simulation results indicate that the model is suitable for the vehicle adaptive cruise control system,and both of the electronic throttle and the active braking system work in a reasonable way.An adaptive cruise control （ACC） example illustrates that the model has a good performance in cruise and distance keeping.

Design of the pressure regulation algorithm for active braking in vehicle ACC system

To develop the pressure control algorithm for active braking of adaptive cruise control（ACC） system,a test bench with real parts of the tested vehicle is built.With the dynamic analysis of the active braking actuators,it is demonstrated that different duty of pulse-width modulation（PWM） signals could control the pressure changing rate of the wheel cylinder.To obtain that signal,a modified proportional-integral-differential（PID） control algorithm is developed using the variable parameter method,the control value reset method,the dead zone method and the integral saturation method.Experimental results show that the delay and overshoot of the pressure response could be reduced considerably using the modified PID algorithm compared with the conventional one.The proposed pressure control algorithm could be used for the further development of the ACC＇s controller.

Cooperative merging control strategy of connected and automated vehicles on highways

To improve traffic performance when on-ramp vehicles merge into the mainstream,a collaborative merging control strategy is proposed to determine the merging sequence and trajectory control of vehicles.Merging trajectory planning takes the minimization of vehicle acceleration as the optimization objective.Either the variational method or the quadratic programming method is utilized to determine arrival time,optimal time and control variables for each vehicle.As a supplement,the adaptive cruise control(ACC)model is used to calculate each control variable in each time interval on special occasions.Simulation results show that the cooperative merging control strategy outperforms the optimal control strategy.The root mean square(RMS)of acceleration and the root mean square error(RMSE)of time headway are significantly decreased,with the reductions up to 90.1%and 25.2%,respectively.Under the cooperative control strategy,the difference between the average speed and desired speed consistently approaches zero.In addition,few or no collisions occur.To conclude,the proposed strategy favours the improvements in passenger comfort,traffic efficiency,traffic stability and safety around highway on-ramps.

Model predictive control for adaptive cruise control with multi-objectives: comfort,fuel-economy,safety and car-following

For automated vehicles,comfortable driving will improve passengers’ satisfaction.Reducing fuel consumption brings economic profits for car owners,decreases the impact on the environment and increases energy sustainability.In addition to comfort and fuel-economy,automated vehicles also have the basic requirements of safety and car-following.For this purpose,an adaptive cruise control (ACC) algorithm with multi-objectives is proposed based on a model predictive control (MPC) framework.In the proposed ACC algorithm,safety is guaranteed by constraining the inter-distance within a safe range; the requirements of comfort and car-following are considered to be the performance criteria and some optimal reference trajectories are introduced to increase fuel-economy.The performances of the proposed ACC algorithm are simulated and analyzed in five representative traffic scenarios and multiple experiments.The results show that not only are safety and car-following objectives satisfied,but also driving comfort and fuel-economy are improved significantly.