Improved AHP method and its application in lake environmental comprehensive quality evaluation—a case study of Xuanwu Lake, Nanjing, China

The relative importance of each pollution factor in analytical hierarchy process (AHP) method comes from pooling expert opinions in general. Because expert opinions are based on information and judgment criteria, determining their weight may lead to uncertainty.. Therefore, an improved AHP method had been developed. The process of the improved AHP method involved four key procedures. The weights of pollution factors were completely related to the objective monitoring data through the standardization of these procedures. The environmental comprehensive quality of water and sediment of Xuanwu Lake, Nanjing, China had been evaluated. The environmental quality comprehensive indices (EQCI) of the water in 1991-1995 and 1996-2000 were 3.32 and 1.85, respectively, indicating that the water quality improved. The EQCI of the sediment in 1995 and 2000 indicates that the sediment contamination decreased from 1995 to 2000. Such results agreed with the fact that the lake had been under comprehensive control. However, with the classical AHP method, the EQCI of the sediment in the northwestern part of the lake may have indicated that sediment contamination increased from 1995 to 2000. The discrepancy may have resulted from the judgment difference of the experts. The improved AHP method can avoid arbitrariness of subjective judgment and can reflect the real influential factors of environment pollution in different periods or regions.

Monte Carlo Analytic Hierarchy Process (MAHP) approach to selection of optimum mining method

One of the most critical and complicated steps in mine design is a selection of suitable mining method based upon geological,geotechnical,geographical,safety and economical parameters.The aim of this study is developing a Monte Carlo simulation to selection the optimum mining method by using effective and major criteria and at the same time,taking subjective judgments of decision makers into consideration.Proposed approach is based on the combination of Monte Carlo simulation with conventional Analytic Hierarchy Process(AHP).Monte Carlo simulation is used to determine the confdence level of each alternative’s score,is calculated by AHP,with the respect to the variance of decision makers’opinion.The proposed method is applied for Jajarm Bauxite Mine in Iran and eventually the most appropriate mining methods for this mine are ranked.

Comprehensive evaluation method for superstructures of prestressed concrete girder bridges

A multi-level evaluation model for the superstructure of a damaged prestressed concrete girder or beam bridge is established, and the evaluation indices of the model as well as the rating standards are defined. A normal relative function about the evaluation indices of each element is developed to calculate the relative degree, and for each element there are no sub-level elements. When evaluating the elements in the sub-item level or the index level of the model, the weights of elements pertain to one adopted element, taking into account their degrees of deterioration. Since the relative degrees and structure evaluation scales on the damage conditions are applied to characterize the superstructure of damaged prestressed concrete girder bridges, this method can evaluate the prestressed structure in detail, and the evaluation results agree with the Code for Maintenance of Highway Bridges and Culvers （JTG Hll--2004 ）. Finally, a bridge in Jilin province is taken as an example, using the method developed to evaluate its damage conditions, which gives an effective way for bridge engineering.

Study on the Multi-dimension Evaluation Index System of Agricultural Water Resources in Liaoning Province

[Objective] This study aimed to establish the multi-dimensional evaluation index system of agricultural water resources in Liaoning Province. [Method] Delphi method in conjunction with AHP method was adopted to establish the multi-dimensional evaluation index system of agricultural water resources in Liaoning Province, and all the indexes in each hierarchy were ranked overall according to their weights. [Result] There were three hierarchies in this index system, totally including 21 indexes, among which water resource exploitation and utilization rate, sewage treatment rate and utilization of available water resources were the three crucial factors influencing the sustainable development. [Conclusion] This evaluation index system can reflect the true sustainable situation of the agricultural water resources in Liaoning Province.

A RISK ASSESSMENT METHOD OF THE WIRELESS NETWORK SECURITY

The core of network security is the risk assessment. In this letter,a risk assessment method is introduced to estimate the wireless network security. The method,which combines Analytic Hier-archy Process (AHP) method and fuzzy logical method,is applied to the risk assessment. Fuzzy logical method is applied to judge the important degree of each factor in the aspects of the probability,the influence and the uncontrollability,not to directly judge the important degree itself. The risk as-sessment is carved up 3 layers applying AHP method,the sort weight of the third layer is calculated by fuzzy logical method. Finally,the important degree is calculated by AHP method. By comparing the important degree of each factor,the risk which can be controlled by taking measures is known. The study of the case shows that the method can be easily used to the risk assessment of the wireless network security and its results conform to the actual situation.

Optimum mining method selection using fuzzy analytical hierarchy process–Qapiliq salt mine,Iran

Mining method selection is the first and the most critical problem in mine design and depends on some parameters such as geotechnical and geological features and economic and geographic factors. In this paper, the factors affecting mining method selection are determined. These factors include shape, thick- ness, depth, slope, RMR and RSS of the orebody, RMR and RSS of the hanging wall and footwall. Then, the priorities of these factors are calculated. In order to calculate the priorities of factors and select the best mining method for Qapiliq salt mine, Iran, based on these priorities, fuzzy analytical hierarchy process （AHP） technique is used. For this purpose, a questionnaire was prepared and was given to the associated experts. Finally, after a comparison carried out based on the effective factors, between the four mining methods including area mining, room and pillar, cut and fill and stope and pillar methods, the stope and nillar mining method was selected as the most suitable method to this mine.

A Method for Determining the Reliability Index of a Materiel Subsystem

This paper presents a method for determining the reliability index of a subsystem in the materiel demonstration phase-AHP Failure Rate Method. It fully considers the various factors which influence a subsystem reliability index and solves a difficult problem that puzzles the demonstration personnel.

Multilevel grey evaluation on the comprehensive contribution of standards to Shanghai automobile industry

Standard has played an important role in modern enterprises and society through the encouragement of technology innovation and distribution. Based on the survey of 30 typical enterprises in the field of automobile in Shanghai, this paper makes quantitative analysis on comprehensive contribution of standard to automobile industry and accomplishes the demonstration of standard comprehensive evaluation index system. The analysis shows that standardization makes obvious contribution to Shanghai automobile industry.

The Feasibility Analysis of Delayed Retirement in Northwest China --Taking Gansu Province as an Example

Gansu Province in the northwest of China, so the research on the impact of delay retirement in Gansu province have a certain representation. This paper analyzes the current situation of human resources in Gansu province the proportion of the labor force is relatively low, the age structure of aging, education, human resources quality is still not high, the use of theoretical analysis method of overlapping generations model and AHP method to verify the proposed implementation. The delay retirement policy to increase the effective adjustment of Gansu province to improve the structure of human resources, better solve the problem of human resources structure in Gansu Province, so as to enhance Gansu＇s core competitive advantage.

Comprehensive evaluation of heavy metal contamination of sediment in Lake Dianchi by using modified AHP method and ^(137)Cs dating

Through the use of general sampling and measurement by ^(137)Cs dating,problems regarding the absence of monitoring data can easily be resolved.Further,weighted values need to be determined while Environment Quality Comprehensive Index(EQCI)is commonly used as applied in environmental quality comprehensive evaluation.In order to overcome the subjectivity in determining weights,the modified Analytical Hierarchy Process(AHP)method was designed.The modified AHP method involved the following key procedures:First,the parameters y_(i1) and y_(i2) were calculated based on the monitoring data;second,the factors were put in order according to the symbol and value of y_(i1) and y_(i2);third,the continuous odd integers,which represented the importance of factors,were given to factors according to their seating order;and,fourth,the factor weights were determined from the pair-wise comparison matrix calculated by the ratio of the given odd integers.Therefore,the weights were completely based on the monitoring data.In the present study,the comprehensive quality of sediments in five sections of Lake Dianchi were evaluated and the results indicated that the current contamination of sediments in each lake section is much more serious than at any other time in history.

Comprehensive Optimal Control on Seismic Response of a Single-Tower Self-Anchored Suspension Bridge

Earthquake may cause severe damage to all kinds of bridge such as the falling down of the girder; therefore,effective measures should be employed to control the seismic displacement. In this paper,the method of comprehensive optimal control,com-bined with analytic hierarchy process,is employed to investigate the seismic response control of the Nanjing Jiangxinzhou Bridge,which is a single-tower self-anchored suspension bridge （SSSB）. Also,3-dimensional nonlinear seismic response analyses are con-ducted. Three types of practical connection measures for seismic response control of SSSB are investigated,and the optimal pa-rameters of the connection devices are achieved by this method. Results show that both the elastic connection devices and the damp-ers with rational parameters can reduce the seismic displacement of the bridge effectively,but the elastic connection devices will in-crease the seismic force of the tower. When all factors are consid-ered,the optimal measure is by using the elastic connection devices and the dampers together. These results can provide references for seismic response control of SSSBs.

A MODEL FOR THE“MAXIMUM CAPACITY” OF ROOMS OR OF SPACE

A discrete optimum mathematical model to derive the 'maximum capacity' of people in a room or in a space used for public gatherings is developed. There are two outcomes in the model. One is focused on whether the person farthest from exits can escape from the room. The other concentrates on the evacuation time of all the people in the room. According to the results of the two outcomes, a more reasonable 'maximum capacity' can be worked out in a simple way.