By making use of the quasi-two-dimensional （quasi-2D） model, the current-voltage （l-V） characteristics of In0AsA10.82N/A1N/GaN heterostructure field-effect transistors （HFETs） with different gate lengths are sim...By making use of the quasi-two-dimensional （quasi-2D） model, the current-voltage （l-V） characteristics of In0AsA10.82N/A1N/GaN heterostructure field-effect transistors （HFETs） with different gate lengths are simulated based on the measured capacitance-voltage （C-V） characteristics and I-V characteristics. By analyzing the variation of the electron mobility for the two-dimensional electron gas （2DEG） with electric field, it is found that the different polarization charge distributions generated by the different channel electric field distributions can result in different polarization Coulomb field scatterings. The difference between the electron mobilities primarily caused by the polarization Coulomb field scatterings can reach up to 1522.9 cm2/V.s for the prepared In0.38AI0.82N/A1N/GaN HFETs. In addition, when the 2DEG sheet density is modulated by the drain-source bias, the electron mobility presents a peak with the variation of the 2DEG sheet density, the gate length is smaller, and the 2DEG sheet density corresponding to the peak point is higher.展开更多
We present the growth of CaN epilayer on Si （111） substrate with a single A1GaN interlayer sandwiched between the GaN epilayer and A1N buffer layer by using the metalorganic chemical vapour deposition. The influence...We present the growth of CaN epilayer on Si （111） substrate with a single A1GaN interlayer sandwiched between the GaN epilayer and A1N buffer layer by using the metalorganic chemical vapour deposition. The influence of the AlN buffer layer thickness on structural properties of the GaN epilayer has been investigated by scanning electron microscopy, atomic force microscopy, optical microscopy and high-resolution x-ray diffraction. It is found that an A1N buffer layer with the appropriate thickness plays an important role in increasing compressive strain and improving crystal quality during the growth of AlGaN interlayer, which can introduce a more compressive strain into the subsequent grown GaN layer, and reduce the crack density and threading dislocation density in GaN film.展开更多
A three-step growth process is developed for depositing high-quality aluminium-nitride （AlN） epilayers on （001） sapphire by low pressure metalorganic chemical vapour deposition （LP-MOCVD）. We adopt a low tempera...A three-step growth process is developed for depositing high-quality aluminium-nitride （AlN） epilayers on （001） sapphire by low pressure metalorganic chemical vapour deposition （LP-MOCVD）. We adopt a low temperature （LT） A1N nucleation layer （NL）, and two high temperature （HT） A1N layers with different V/Ⅲ ratios. Our results reveal that the optimal NL temperature is 840-880℃, and there exists a proper growth switching from low to high V/Ⅲ ratio for further reducing threading dislocations （TDs）. The screw-type TD density of the optimized AIN film is just 7.86×10^6 cm^-2, about three orders lower than its edge-type one of 2×10^9 cm^-2 estimated by high-resolution x-ray diffraction （HRXRD） and cross-sectional transmission electron microscopy （TEM）.展开更多
AlN/GaN high-electron-mobility transistors （HEMTs） on SiC substrates were fabricated by metalorganic chemical vapor deposition （MOCVD） and then characterized. An Si/Ti/Al/Ni/Au stack was used to reduce ohmic conta...AlN/GaN high-electron-mobility transistors （HEMTs） on SiC substrates were fabricated by metalorganic chemical vapor deposition （MOCVD） and then characterized. An Si/Ti/Al/Ni/Au stack was used to reduce ohmic contact resistance （0.33 g2.mm） at a low annealing temperature. The fabricated devices exhibited a maximum drain current density of 1.07 A/mm （Vows = I V） and a maximum peak extrinsic transconductance of 340 mS/mm. The off-state breakdown voltage of the device was 64 V with a gate-drain distance of 1.9 μm. The current gain extrinsic cutoff frequency fT and the maximum oscillation frequency fmax were 36 and 80 GHz with a 0.25 μm gate length, respectively.展开更多
AlGaN/GaN high electron mobility transistors（HEMTs）with high performance were fabricated and characterized.A variety of techniques were used to improve device performance,such as AlN interlayer,silicon nitride passi...AlGaN/GaN high electron mobility transistors（HEMTs）with high performance were fabricated and characterized.A variety of techniques were used to improve device performance,such as AlN interlayer,silicon nitride passivation,high aspect ratio T-shaped gate,low resistance ohmic contact and short drain-source distance. DC and RF performances of as-fabricated HEMTs were characterized by utilizing a semiconductor characterization system and a vector network analyzer,respectively.As-fabricated devices exhibited a maximum drain current density of 1.41 A/mm and a maximum peak extrinsic transconductance of 317 mS/mm.The obtained current density is larger than those reported in the literature to date,implemented with a domestic wafer and processes.Furthermore, a unity current gain cut-off frequency of 74.3 GHz and a maximum oscillation frequency of 112.4 GHz were obtained on a device with an 80 nm gate length.展开更多
A1GaN/GaN high electron-mobility transistors （HEMTs） with 5 nm A1N passivation by plasma en- hanced atomic layer deposition （PEALD） were fabricated, covered by 50 nm SiNx which was grown by plasma enhanced chemica...A1GaN/GaN high electron-mobility transistors （HEMTs） with 5 nm A1N passivation by plasma en- hanced atomic layer deposition （PEALD） were fabricated, covered by 50 nm SiNx which was grown by plasma enhanced chemical vapor deposition （PECVD）. With PEALD A1N passivation, current collapse was suppressed more effectively and the devices show better subthreshold characteristics. Moreover, the insertion of A1N increased the RF transconductance, which lead to a higher cut-off frequency. Temperature dependence of DC characteristics demonstrated that the degradations of drain current and maximum transconductance at elevated temperatures for the A1N/SiNx passivated devices were much smaller compared with the devices with SiNx passivation, indicating that PEALD A1N passivation can improve the high temperature operation of the A1GaN/GaN HEMTs.展开更多
基金Projected supported by the National Natural Science Foundation of China(Grant No.11174182)the Specialized Research Fund for the Doctoral Program of Higher Education,China(Grant No.20110131110005)
文摘By making use of the quasi-two-dimensional （quasi-2D） model, the current-voltage （l-V） characteristics of In0AsA10.82N/A1N/GaN heterostructure field-effect transistors （HFETs） with different gate lengths are simulated based on the measured capacitance-voltage （C-V） characteristics and I-V characteristics. By analyzing the variation of the electron mobility for the two-dimensional electron gas （2DEG） with electric field, it is found that the different polarization charge distributions generated by the different channel electric field distributions can result in different polarization Coulomb field scatterings. The difference between the electron mobilities primarily caused by the polarization Coulomb field scatterings can reach up to 1522.9 cm2/V.s for the prepared In0.38AI0.82N/A1N/GaN HFETs. In addition, when the 2DEG sheet density is modulated by the drain-source bias, the electron mobility presents a peak with the variation of the 2DEG sheet density, the gate length is smaller, and the 2DEG sheet density corresponding to the peak point is higher.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 60506001,60476021,60576003,60776047and 60836003)the National Basic Research Program of China (Grant No. 2007CB936700)the Project of Technological Research and Development of Hebei Province,China (Grant No. 07215134)
文摘We present the growth of CaN epilayer on Si （111） substrate with a single A1GaN interlayer sandwiched between the GaN epilayer and A1N buffer layer by using the metalorganic chemical vapour deposition. The influence of the AlN buffer layer thickness on structural properties of the GaN epilayer has been investigated by scanning electron microscopy, atomic force microscopy, optical microscopy and high-resolution x-ray diffraction. It is found that an A1N buffer layer with the appropriate thickness plays an important role in increasing compressive strain and improving crystal quality during the growth of AlGaN interlayer, which can introduce a more compressive strain into the subsequent grown GaN layer, and reduce the crack density and threading dislocation density in GaN film.
基金Supported by the National Natural Science Foundation of China under Grant Nos 10474126 and 10574148, the National High- Tech Research and Development Programme of China under Grant Nos 07K1031B21 and 07K1021B21, and the National Basic Research Programme of China under Grant No 2002CB311900.
文摘A three-step growth process is developed for depositing high-quality aluminium-nitride （AlN） epilayers on （001） sapphire by low pressure metalorganic chemical vapour deposition （LP-MOCVD）. We adopt a low temperature （LT） A1N nucleation layer （NL）, and two high temperature （HT） A1N layers with different V/Ⅲ ratios. Our results reveal that the optimal NL temperature is 840-880℃, and there exists a proper growth switching from low to high V/Ⅲ ratio for further reducing threading dislocations （TDs）. The screw-type TD density of the optimized AIN film is just 7.86×10^6 cm^-2, about three orders lower than its edge-type one of 2×10^9 cm^-2 estimated by high-resolution x-ray diffraction （HRXRD） and cross-sectional transmission electron microscopy （TEM）.
文摘AlN/GaN high-electron-mobility transistors （HEMTs） on SiC substrates were fabricated by metalorganic chemical vapor deposition （MOCVD） and then characterized. An Si/Ti/Al/Ni/Au stack was used to reduce ohmic contact resistance （0.33 g2.mm） at a low annealing temperature. The fabricated devices exhibited a maximum drain current density of 1.07 A/mm （Vows = I V） and a maximum peak extrinsic transconductance of 340 mS/mm. The off-state breakdown voltage of the device was 64 V with a gate-drain distance of 1.9 μm. The current gain extrinsic cutoff frequency fT and the maximum oscillation frequency fmax were 36 and 80 GHz with a 0.25 μm gate length, respectively.
文摘AlGaN/GaN high electron mobility transistors（HEMTs）with high performance were fabricated and characterized.A variety of techniques were used to improve device performance,such as AlN interlayer,silicon nitride passivation,high aspect ratio T-shaped gate,low resistance ohmic contact and short drain-source distance. DC and RF performances of as-fabricated HEMTs were characterized by utilizing a semiconductor characterization system and a vector network analyzer,respectively.As-fabricated devices exhibited a maximum drain current density of 1.41 A/mm and a maximum peak extrinsic transconductance of 317 mS/mm.The obtained current density is larger than those reported in the literature to date,implemented with a domestic wafer and processes.Furthermore, a unity current gain cut-off frequency of 74.3 GHz and a maximum oscillation frequency of 112.4 GHz were obtained on a device with an 80 nm gate length.
基金Project supported by the National Natural Science Foundation of China(No.60890192)
文摘A1GaN/GaN high electron-mobility transistors （HEMTs） with 5 nm A1N passivation by plasma en- hanced atomic layer deposition （PEALD） were fabricated, covered by 50 nm SiNx which was grown by plasma enhanced chemical vapor deposition （PECVD）. With PEALD A1N passivation, current collapse was suppressed more effectively and the devices show better subthreshold characteristics. Moreover, the insertion of A1N increased the RF transconductance, which lead to a higher cut-off frequency. Temperature dependence of DC characteristics demonstrated that the degradations of drain current and maximum transconductance at elevated temperatures for the A1N/SiNx passivated devices were much smaller compared with the devices with SiNx passivation, indicating that PEALD A1N passivation can improve the high temperature operation of the A1GaN/GaN HEMTs.
