Templated synthesis of transition metal phosphide electrocatalysts for oxygen and hydrogen evolution reactions

Transition metal phosphides(TMPs)have been regarded as alternative hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)catalysts owing to their comparable activity to those of noble metal-based catalysts.TMPs have been produced in various morphologies,including hollow and porous nanostructures,which are features deemed desirable for electrocatalytic materials.Templated synthesis routes are often responsible for such morphologies.This paper reviews the latest advances and existing challenges in the synthesis of TMP-based OER and HER catalysts through templated methods.A comprehensive review of the structure-property-performance of TMP-based HER and OER catalysts prepared using different templates is presented.The discussion proceeds according to application,first by HER and further divided among the types of templates used-from hard templates,sacrificial templates,and soft templates to the emerging dynamic hydrogen bubble template.OER catalysts are then reviewed and grouped according to their morphology.Finally,prospective research directions for the synthesis of hollow and porous TMP-based catalysts,such as improvements on both activity and stability of TMPs,design of environmentally benign templates and processes,and analysis of the reaction mechanism through advanced material characterization techniques and theoretical calculations,are suggested.

A Joint Entity Relation Extraction Model Based on Relation Semantic Template Automatically Constructed

The joint entity relation extraction model which integrates the semantic information of relation is favored by relevant researchers because of its effectiveness in solving the overlapping of entities,and the method of defining the semantic template of relation manually is particularly prominent in the extraction effect because it can obtain the deep semantic information of relation.However,this method has some problems,such as relying on expert experience and poor portability.Inspired by the rule-based entity relation extraction method,this paper proposes a joint entity relation extraction model based on a relation semantic template automatically constructed,which is abbreviated as RSTAC.This model refines the extraction rules of relation semantic templates from relation corpus through dependency parsing and realizes the automatic construction of relation semantic templates.Based on the relation semantic template,the process of relation classification and triplet extraction is constrained,and finally,the entity relation triplet is obtained.The experimental results on the three major Chinese datasets of DuIE,SanWen,and FinRE showthat the RSTAC model successfully obtains rich deep semantics of relation,improves the extraction effect of entity relation triples,and the F1 scores are increased by an average of 0.96% compared with classical joint extraction models such as CasRel,TPLinker,and RFBFN.

Road Traffic Monitoring from Aerial Images Using Template Matching and Invariant Features

Road traffic monitoring is an imperative topic widely discussed among researchers.Systems used to monitor traffic frequently rely on cameras mounted on bridges or roadsides.However,aerial images provide the flexibility to use mobile platforms to detect the location and motion of the vehicle over a larger area.To this end,different models have shown the ability to recognize and track vehicles.However,these methods are not mature enough to produce accurate results in complex road scenes.Therefore,this paper presents an algorithm that combines state-of-the-art techniques for identifying and tracking vehicles in conjunction with image bursts.The extracted frames were converted to grayscale,followed by the application of a georeferencing algorithm to embed coordinate information into the images.The masking technique eliminated irrelevant data and reduced the computational cost of the overall monitoring system.Next,Sobel edge detection combined with Canny edge detection and Hough line transform has been applied for noise reduction.After preprocessing,the blob detection algorithm helped detect the vehicles.Vehicles of varying sizes have been detected by implementing a dynamic thresholding scheme.Detection was done on the first image of every burst.Then,to track vehicles,the model of each vehicle was made to find its matches in the succeeding images using the template matching algorithm.To further improve the tracking accuracy by incorporating motion information,Scale Invariant Feature Transform(SIFT)features have been used to find the best possible match among multiple matches.An accuracy rate of 87%for detection and 80%accuracy for tracking in the A1 Motorway Netherland dataset has been achieved.For the Vehicle Aerial Imaging from Drone(VAID)dataset,an accuracy rate of 86%for detection and 78%accuracy for tracking has been achieved.

Reactive template-derived interfacial engineering of CoP/CoO heterostructured porous nanotubes towards superior electrocatalytic hydrogen evolution

The development of economical,efficient,and robust electrocatalysts toward the hydrogen evolution reaction(HER)is highly imperative for the rapid advancement of renewable H2 energy-associated technologies.Extensive utilization of the heterointerface effect can endow the catalysts with remarkably boosted electrocatalytic performance due to the modified electronic state of active sites.Herein,we demonstrate deliberate crafting of CoP/CoO heterojunction porous nanotubes(abbreviated as CoP/CoO PNTs hereafter)using a self-sacrificial template-engaged strategy.Precise control over the Kirkendall diffusion process of the presynthesized cobalt–aspartic acid complex nanowires is indispensable for the formation of CoP/CoO heterostructures.The topochemical transformation strategy of the reactive templates enables uniform and maximized construction of CoP/CoO heterojunctions throughout all the porous nanotubes.The establishment of CoP/CoO heterojunctions could considerably modify the electronic configuration of the active sites and also improve the electric conductivity,which endows the resultant CoP/CoO PNTs with enhanced intrinsic activity.Simultaneously,the hollow and porous nanotube architectures allow sufficient accessibility of exterior/interior surfaces and molecular permeability,drastically promoting the reaction kinetics.Consequently,when used as HER electrocatalysts,the well-designed CoP/CoO PNTs show Pt-like activity,with an overpotential of only 61 mV at 10mA cm^(−2) and excellent stability in 1.0M KOH medium,exceeding those of the vast majority of the previously reported nonprecious candidates.Density functional theory calculations further substantiate that the construction of CoP/CoO heterojunctions enables optimization of the Gibbs free energies for water adsorption and H adsorption,resulting in boosted HER intrinsic activity.The present study may provide in-depth insights into the fundamental mechanisms of heterojunction-induced electronic regulation,which may pave the way for the rational design of advanced Earth-abundant electrocatalysts in the future.

Template synthesis of copper azide primary explosive through Cu2O@HKUST-1 core-shell composite prepared by “bottle around ship” method

Copper azide(CA), as a primary explosive with high energy density, has not been practically used so far because of its high electrostatic sensitivity. The Cu2O@HKUST-1 core-shell structure hybrid material was synthesized by the “bottle around ship” methodology in this research by regulating the dissolution rate of Cu2O and the generation rate of metal-organic framework(MOF) materials. Cu2O@HKUST-1 was carbonized to form a Cu O@porous carbon(CuO@PC) composite material. CuO@PC was synthesized into a copper azide(CA) @PC composite energetic material through a gas-solid phase in-situ azidation reaction.CA is encapsulated in PC framework, which acts as a nanoscale Faraday cage, and its excellent electrical conductivity prevents electrostatic charges from accumulating on the energetic material’s surface. The CA@PC composite energetic material has a CA content of 89.6%, and its electrostatic safety is nearly 30times that of pure CA(1.47 mJ compared to 0.05 mJ). CA@PC delivers an outstanding balance of safety and energy density compared to similar materials.

Synthesis and Characterization of Hollow Strontium Carbonate Pompons by Composite Soft Template Method

The hollow strontium carbonate pompons was synthesized for the first time by a controlled reaction precipitation method with sodium dodecyl benzene sulfonate(SDBS)and polyvinyl pyrrolidone(PVP)work together as template.The sampled particles were characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),nitrogen adsorption-desorption measurement,X-ray diffraction(XRD),Energy dispersive X-Ray spectroscopy(EDX),Fourier transform infrared spectroscopy(FTIR),Thermogravimetric analysis and differential scanning calorimetry(TGA-DSC),etc.It is shown that the assynthesized hollow strontium carbonate pompons with the size of about 2μm consist of flake-like particles under the optimal reaction conditions.The formation mechanism of hollow strontium carbonate pompons was preliminarily explored.

Efficient Scalable Template-Matching Technique for Ancient Brahmi Script Image

Analysis and recognition of ancient scripts is a challenging task as these scripts are inscribed on pillars,stones,or leaves.Optical recognition systems can help in preserving,sharing,and accelerate the study of the ancient scripts,but lack of standard dataset for such scripts is a major constraint.Although many scholars and researchers have captured and uploaded inscription images on various websites,manual searching,downloading and extraction of these images is tedious and error prone.Web search queries return a vast number of irrelevant results,and manually extracting images for a specific script is not scalable.This paper proposes a novelmultistage system to identify the specific set of script images from a large set of images downloaded from web sources.The proposed system combines the two most important pattern matching techniques-Scale Invariant Feature Transform(SIFT)and Template matching,in a sequential pipeline,and by using the key strengths of each technique,the system can discard irrelevant images while retaining a specific type of images.

Fabrication and Characterization of LiFePO4 Nanotubes by a Sol-gel-AAO Template Process

采用溶胶凝胶法在氧化铝模板中成功的制备了LiFePO4一维纳米管阵列．扫描电子显微镜和透射电子显微镜表征结果表明所制备的LiFePO4纳米管具有单分散性,互相平行,高度有序。综合选区电子衍射、X射线衍射以及X光线能谱表征结果,所制备的LiFePO4纳米管为单一的橄榄石型结构．这种在室温和温和条件下合成的一维LiFePO4纳米管,可以做为新型的锂离子电池正极材料．

基于JdbcTemplate的数据库访问处理

Spring JdbcTemplate简化了对数据库的访问处理,详细讨论了JdbcTemplate实现对数据库表格的增、删、改、查询的操作处理方法。分别针对多行数据结果集、单值结果的查询需求,给出相应的JdbcTemplate的不同方法调用。在数据更新处理中,讨论了完整SQL和带参数填充的SQL的方法调用形式。最后,结合文件内容的保存与恢复处理实例,介绍了大容量数据的读写,通过LobCreator对象的setBlobAsBinaryStream方法实现LOB数据的写入,通过LobHandler接口提供的系列方法可获取LOB数据。

Direct electrodeposition of ionic liquid-based template-free Sn Co alloy nanowires as an anode for Li-ion batteries

Sn Co alloy nanowires were successfully electrodeposited from Sn Cl2-Co Cl2-1-ethyl-3-methylimidazolium chloride(EMIC) ionic liquid without a template. The nanowires were obtained from the molar ratio of 5:40:60 for Sn Cl2(25)Co Cl2(25)EMIC at-0.55 V and showed a minimum diameter of about 50 nm and lengths of over 20 μm. The as-fabricated SnCo nanowires were about 70 nm in diameter and featured a Sn/Co weight ratio of 3.85:1, when used as an anode for a Li-ion battery, they presented respective specific capacities of 687 and 678 m Ah·g^(-1) after the first charge and discharge cycle and maintained capacities of about 654 m Ah·g^(-1) after 60 cycles and 539 m Ah·g^(-1) after 80 cycles at a current density of 300 m A·g^(-1). Both the nanowire structure and presence of elemental Co helped buffer large volume changes in the Sn anode during charging and discharging to a certain extent, thereby improving the cycling performance of the Sn anode.

Preparation of silver nanoparticle via active template under ultrasonic

A novel method was described for the production of silver nanoparticle by using nano-carbon as active template.Special ultrasonic condition was used to assure the active effect of the template and achieve an even and stable micro-reactor system,therefore yield uniform silver nanoparticle without obvious agglomeration.By laser granularity instrument measurement,the silver nanoparticles show a mean diameter of 20.4 nm and narrow distribution between 18.7 nm and 23.0 nm according to the optimum technology.Regular spherical morphology can be observed by transmission electron microscopy(TEM).X-ray diffraction analysis indicates that Ag+ is deoxidized to form metal Ag during producing precursor,subsequent calcinations promote phase transformation from nonholonomic crystal to complete cubic crystal,which is consistent with the standard JCPDS card of silver.The results reveal that the nano-carbon in active template system not only exerts micro-reactor and steric stabilization effect,but also acts as reducing agent during the reaction.

Optoelectronic characterisation of an individual ZnO nanowire in contact with a micro-grid template

Optoelectronic characterisation of an individual ZnO nanowire in contact with a micro-grid template has been studied. The low-cost micro-grid template made by photolithography is used to fabricate the ohmic contact metal electrodes. The current increases linearly with the bias, indicating good ohmic contacts between the nanowire and the electrodes. The resistivity of the ZnO nanowire is calculated to be 3.8 Ω·cm. We investigate the photoresponses of an individual ZnO nanowire under different light illumination using light emitting diodes （λ= 505 nm, 460 nm, 375 nm） as excitation sources in atmosphere. When individual ZnO nanowire is exposured to different light irradiation, we find that it is extremely sensitive to UV illumination; the conductance is much larger upon UV illumination than that in the dark at room temperature. This phenomenon may be related to the surface oxygen molecule adsorbtion, which indicates their potential application to the optoelectronic switching device.

Preparation and Characterization of Y-type Carbon Nanotubes by Using Anodized Alumina Oxide (AAO) Template

利用两步氧化法,通过对氧化直流电压进行周期性调制可制备出带有Y型孔道的氧化铝模板;然后以金属钴为催化剂,乙炔为碳源,通过CVD法制取得到具有规则Y型分支的碳纳米管阵列.已制备出的碳管分支角度在20°～120°的范围内.实验表明,两段分支所成的角度以及分支的长度与合成氧化铝模板的脉冲电压调节规律有关,短脉冲,高氧化电压有利于生长出的短而密集的分支构型.

A multiple template approach for robust tracking of fast motion target

Target tracking is very important in computer vision and related areas. It is usually difficult to accurately track fast motion target with appearance variations. Sometimes the tracking algorithms fail for heavy appearance variations. A multiple template method to track fast motion target with appearance changes is presented under the framework of appearance model with Kalman filter. Firstly, we construct a multiple template appearance model, which includes both the original template and templates affinely transformed from original one. Generally speaking, appearance variations of fast motion target can be covered by affine transformation. Therefore, the affine tr templates match the target of appearance variations better than conventional models. Secondly, we present an improved Kalman filter for approx- imate estimating the motion trail of the target and a modified similarity evaluation function for exact matching. The estimation approach can reduce time complexity of the algorithm and keep accuracy in the meantime. Thirdly, we propose an adaptive scheme for updating template set to alleviate the drift problem. The scheme considers the following differences： the weight differences in two successive frames; different types of affine transformation applied to templates. Finally, experiments demonstrate that the proposed algorithm is robust to appearance varia- tion of fast motion target and achieves real-time performance on middle/low-range computing platform.

POROUS MEMBRANE TEMPLATED SYNTHESIS OF POLYMER PILLARED LAYER

The anodic porous alumina membranes with a definite pore diameter and aspect ratio were used as templates tosynthesize polymer pillared layer structures. The pillared polymer was produced in the template membrane pores, and thelayer on the template surfaces. Rigid cured epoxy resin, polystyrene and soft hydrogel were chosen to confirm themethodology. The pillars were in the form of either tubes or fibers, which were controlled by the alumina membrane pore surface wettability. The structural features were confirmed by scanning electron microscopy results.

Carbon as a hard template for nano material catalysts

As one of the naturally abundant elements, carbon can present in different molecular structures （allotropes） and thus lead to various physi- cal/chemical properties of carbon-based materials which have found wide applications in a variety of fields including electrochemistry, optical, adsorption and catalysis, etc. On the other hand, its different allotropes also endow carbon-based materials with various morphostructures, which have been recently explored to prepare oxides and zeolites/zeotypes with tailored structures. In this review, we mainly summarize the recent advances in using carbon materials as hard templates to synthesize structural materials. Specifically, we focus on the development in the synthetic strategies, such as endotemplating, exotemplating approaches and using carbon materials as chemical reagents for the synthesis of metal carbides or nitrides, with an emphasis laid on the control of morphostructure. Meanwhile, the applications of the obtained materials will be highlighted, especially, in the field of heterogeneous catalysis where enhanced performances have been achieved with the materials derived from carbon-templated methods.

SYNTHESIS OF MESOPOROUS POLY(STYRENE-co-MALEIC ANHYDRIDE)/SILICA HYBRID MATERIALS VIA A NONSURFACTANT-TEMPLATED SOL-GEL PROCESS

Mesoporous poly(styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis was achieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymer in the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template or pore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder X-ray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m(2)/g) and pore volumes (e.g. 0.6 cm(3)/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, pore volumes and pore diameters of the hybrid materials increase.

Production of gasoline range hydrocarbons from methanol on hierarchical ZSM-5 and Zn/ZSM-5 catalyst prepared with soft second template

Nano hierarchical mesoporous ZSM-5 catalysts were prepared with cationic dimethyldiallyl ammonium chloride acrylamide copolymer（PDDA） as a soft second template. Using ZSM-5 catalyst as a matrix,Zn/ZSM-5 catalysts were also obtained by the wet impregnation method. The effect of the PDDA amount and Zn loadings on the properties of the catalysts,including crystallinity,morphology,textural properties,acid nature and catalytic activity in MTG reaction,was investigated by XRD,FESEM,TEM,Nitrogen adsorption–desorption isotherms and NH3-TPD method,respectively. The MTG reaction was performed in a fixed bed reactor,and the result revealed that the nano hierarchical ZSM-5 catalyst prepared with a PDDA/Si molar ratio of 0.070 possesses longer stable phase of 70 h with a liquid hydrocarbon selectivity of 29.8%.Zn/ZSM-5 catalyst with a Zn/ZSM-5 ratio of 0.07 wt.% shows the highest liquid hydrocarbon selectivity,reaching 62.5%.

Fabrication of Large-area 3-D Ordered Silvercoated Colloidal Crystals and Macroporous Silver Films Using Polystyrene Templates

The highly ordered silver-coated colloidal crystals arrays and macroporous silver films were derived through an electrostatics-induced adsorption effect using polystyrene(PS) as templates. Carboxyl-modified PS microspheres were prepared by emulsifier-free emulsion polymerization using methacrylic acid(MAA) as the functional monomer. PS microspheres were self-assembled into close packing colloidal crystals of facecentered cubic arrays to the substrate with vertical deposition method. These colloidal crystals were modified using dopamine(DA) to form poly-dopamine(PDA) during its oxidative polymerization. Through electrostatic interaction, the silver nanoparticles were deposited and adsorbed onto the surfaces of colloidal crystals templates by exposing [Ag(NH_3)_2]^+solution to infrared irradiation. Removal of the polymeric template by etching with methylbenzene solvent resulted in 3D ordered macroporous silver films. The structural and properties of the ordered silver-coated arrays and macroporous silver films were characterized by field emission scanning electron microscopy(FE-SEM), X-ray diffraction(XRD), UV-vis spectroscopy and surface-enhanced Raman spectroscopy(SERS). The results indicate that the prepared silver-coated arrays and macroporous silver films possess the features of ordered multilayer arrangement, uniformity and repeatability as well as an ideal SERS effect.

Syntheses and Crystal Structures of Two New Organically Templated Borates:[(C_2H_(10)N_2)]2[B_(14)O_(20)(OH)_6] and [C_8H_(22)N_4][B_5O_6(OH)_4]_2

Two new nonmetal borates, [（C2H10N2）]2[B14O20（OH）6] 1 and [C8H22N4][B5O6（OH）4]2 2, have been synthesized under mild conditions and characterized by single-crystal X-ray diffraction, FTIR, elemental analysis and thermogravimetric analysis. Crystal data for compound 1： triclinic, space group P^-1, a = 8.4979（17）, b = 8.8498（18）, c = 10.065（2）A^°, α = 95.01（3）, β = 96.99（3）, γ = 116.82（3）°, V= 661.8（3）A^°^3, Z= 1, Mr = 697.63, Dc = 1.751 g/cm^3,μ = 0.163 mm^-1, F（000） = 356, the final R = 0.0372 and wR = 0.0968 （I 〉 2σ（I））; and those for compound 2： monoclinic, space group P21/c, a = 9.1867（18）, b= 14.118（3）, c = 10.334（2）A^°, β = 91.48（3）°, V = 1339.8（5）A^°^3, Z = 2, Mr = 610.46, Dc = 1.513 g/cm^3,μ = 0.135 mm^-1, F（000） = 632, the final R = 0.0350 and wR = 0.0912 （I 〉 2σ（I））. For both 1 and 2, the anionic units are interlinked via O-H…O hydrogen bonds to form a 3D supramolecular network, while the protonated cations are located in the free space of the inorganic borate framework and interact with the anions by electrostatic attraction and extensive N-H…O hydrogen bonds.