This paper describes a precise method combining numerical analysis and limit equilibrium theory to determine potential slip surfaces in soil slopes. In this method, the direction of the critical slip surface at any po...This paper describes a precise method combining numerical analysis and limit equilibrium theory to determine potential slip surfaces in soil slopes. In this method, the direction of the critical slip surface at any point in a slope is determined using the Coulomb’s strength principle and the extremum principle based on the ratio of the shear strength to the shear stress at that point. The ratio, which is considered as an analysis index, can be computed once the stress field of the soil slope is obtained. The critical slip direction at any point in the slope must be the tangential direction of a potential slip surface passing through the point. Therefore, starting from a point on the top of the slope surface or on the horizontal segment outside the slope toe, the increment with a small distance into the slope is used to choose another point and the corresponding slip direction at the point is computed. Connecting all the points used in the computation forms a potential slip surface exiting at the starting point. Then the factor of safety for any potential slip surface can be computed using limit equilibrium method like Spencer method. After factors of safety for all the potential slip surfaces are obtained, the minimum one is the factor of safety for the slope and the corresponding potential slip surface is the critical slip surface of the slope. The proposed method does not need to pre-assume the shape of potential slip surfaces. Thus it is suitable for any shape of slip surfaces. Moreover the method is very simple to be applied. Examples are presented in this paper to illustrate the feasibility of the proposed method programmed in ANSYS software by macro commands.展开更多
In order to understand the vibration characteristic of system structure of electronic equipment cabinet within the particular vibration frequency,the finite element analysis software-ANSYS is used to simulate the test...In order to understand the vibration characteristic of system structure of electronic equipment cabinet within the particular vibration frequency,the finite element analysis software-ANSYS is used to simulate the tests of random vibrations of the cabinet system and obtain the isopleths graph of deformation and stress of the cabinet.It can confirm maximum of deformation and stress of the cabinet and position happened.Through more analysis of the frequency response curve,which can confirm harm- ful consequences random vibrations caused and weak link of the cabinet structure.The numerical simulation results are in good a- greement with the experimental results.It shows that this research provides an efficient method for the anti-seismic design and the dynamic optimization design.展开更多
The casing damage has been a big problem in oilfield production. The current detection methods mostly are used after casing damage, which is not very effective. With the rapid development of China's offshore oil i...The casing damage has been a big problem in oilfield production. The current detection methods mostly are used after casing damage, which is not very effective. With the rapid development of China's offshore oil industry, the number of offshore oil wells is becoming larger and larger. Because the cost of offshore oil well is very high, the casing damage will cause huge economic losses. What's more, it can also bring serious pollution to marine environment. So the effective methods of detecting casing damage are required badly. The accumulation of stress is the main reason for the casing damage. Magnetic anisotropy technique based on counter magnetostriction effect can detect the stress of casing in real time and help us to find out the hidden dangers in time. It is essential for us to prevent the casing damage from occurring. However, such technique is still in the development stage. Previous studies mostly got the relationship between stress and magnetic signals by physical experiment, and the study of physical mechanism in relative magnetic permeability connecting the stress and magnetic signals is rarely reported. The present paper uses the ANSYS to do the three-dimensional finite element numerical simulation to study how the relative magnetic permeability works for the oil casing model. We find that the quantitative relationship between the stress' s variation and magnetic induction intensity's variation is: Δδ =K* ΔB, K = 8.04×109, which is proved correct by physical experiment.展开更多
This paper numerically simulates the stress development and generates a three-dimensional model of the medium-length hole blasting in infinite rock mass for continuous charge and divided charge in blasting by using th...This paper numerically simulates the stress development and generates a three-dimensional model of the medium-length hole blasting in infinite rock mass for continuous charge and divided charge in blasting by using the large-scale nonlinear dynamic analysis software LS-DYNA and the elastic-plastic model ~*MAT_PLASTIC_KINEMATIC and JWO-EOS.The differences of the decreasing rate in Von Mises effective stress of blasting,element effective stress peak of free surface,bore wall stress and acceleration are investigated.It is shown that divided charge could greatly improve the blasting effect by engineering blasting practice.展开更多
Implicit and explicit analyses were examined with experimental work done by Razaqpur et al. In the experiment work, two 1000 × 1000 × 70 mm reinforced concrete slabs were constructed. The slabs were subjecte...Implicit and explicit analyses were examined with experimental work done by Razaqpur et al. In the experiment work, two 1000 × 1000 × 70 mm reinforced concrete slabs were constructed. The slabs were subjected to blast loads generated by the detonation of either 22.4 kg or 33.4 kg of ANFO located at a 3.0 m standoff. Blast wave characteristics, including incident and reflected pressures and reflected impulses were measured. The slabs were modeled by implicit and explicit analysis to study their behavior under blast load to compare their predicted and observed behavior. The post-blast damage and mode of failure of each slab were observed. It was concluded that explicit analysis provides better modeling than implicit analysis.展开更多
利用结构动力参数的改变对空间钢网架进行损伤分析,其中许多指标对损伤并不敏感.文中通过结构有限元分析软件AN SY S得到网架结构位移模态分析数据,采用杆件轴向应变变化率的模态分析技术针对不同损伤状况的钢结构网架进行损伤识别,能...利用结构动力参数的改变对空间钢网架进行损伤分析,其中许多指标对损伤并不敏感.文中通过结构有限元分析软件AN SY S得到网架结构位移模态分析数据,采用杆件轴向应变变化率的模态分析技术针对不同损伤状况的钢结构网架进行损伤识别,能够较为准确地诊断出网架杆件的损伤位置.展开更多
文摘This paper describes a precise method combining numerical analysis and limit equilibrium theory to determine potential slip surfaces in soil slopes. In this method, the direction of the critical slip surface at any point in a slope is determined using the Coulomb’s strength principle and the extremum principle based on the ratio of the shear strength to the shear stress at that point. The ratio, which is considered as an analysis index, can be computed once the stress field of the soil slope is obtained. The critical slip direction at any point in the slope must be the tangential direction of a potential slip surface passing through the point. Therefore, starting from a point on the top of the slope surface or on the horizontal segment outside the slope toe, the increment with a small distance into the slope is used to choose another point and the corresponding slip direction at the point is computed. Connecting all the points used in the computation forms a potential slip surface exiting at the starting point. Then the factor of safety for any potential slip surface can be computed using limit equilibrium method like Spencer method. After factors of safety for all the potential slip surfaces are obtained, the minimum one is the factor of safety for the slope and the corresponding potential slip surface is the critical slip surface of the slope. The proposed method does not need to pre-assume the shape of potential slip surfaces. Thus it is suitable for any shape of slip surfaces. Moreover the method is very simple to be applied. Examples are presented in this paper to illustrate the feasibility of the proposed method programmed in ANSYS software by macro commands.
文摘In order to understand the vibration characteristic of system structure of electronic equipment cabinet within the particular vibration frequency,the finite element analysis software-ANSYS is used to simulate the tests of random vibrations of the cabinet system and obtain the isopleths graph of deformation and stress of the cabinet.It can confirm maximum of deformation and stress of the cabinet and position happened.Through more analysis of the frequency response curve,which can confirm harm- ful consequences random vibrations caused and weak link of the cabinet structure.The numerical simulation results are in good a- greement with the experimental results.It shows that this research provides an efficient method for the anti-seismic design and the dynamic optimization design.
基金supported by the National Natural Science Foundation of China(No.41174157)
文摘The casing damage has been a big problem in oilfield production. The current detection methods mostly are used after casing damage, which is not very effective. With the rapid development of China's offshore oil industry, the number of offshore oil wells is becoming larger and larger. Because the cost of offshore oil well is very high, the casing damage will cause huge economic losses. What's more, it can also bring serious pollution to marine environment. So the effective methods of detecting casing damage are required badly. The accumulation of stress is the main reason for the casing damage. Magnetic anisotropy technique based on counter magnetostriction effect can detect the stress of casing in real time and help us to find out the hidden dangers in time. It is essential for us to prevent the casing damage from occurring. However, such technique is still in the development stage. Previous studies mostly got the relationship between stress and magnetic signals by physical experiment, and the study of physical mechanism in relative magnetic permeability connecting the stress and magnetic signals is rarely reported. The present paper uses the ANSYS to do the three-dimensional finite element numerical simulation to study how the relative magnetic permeability works for the oil casing model. We find that the quantitative relationship between the stress' s variation and magnetic induction intensity's variation is: Δδ =K* ΔB, K = 8.04×109, which is proved correct by physical experiment.
基金National Natural Science Foundation of China （No. 51304087） Foundation Projects of Yun- nan Province （No. KKSY201404056, No. KKSA201121083）
文摘This paper numerically simulates the stress development and generates a three-dimensional model of the medium-length hole blasting in infinite rock mass for continuous charge and divided charge in blasting by using the large-scale nonlinear dynamic analysis software LS-DYNA and the elastic-plastic model ~*MAT_PLASTIC_KINEMATIC and JWO-EOS.The differences of the decreasing rate in Von Mises effective stress of blasting,element effective stress peak of free surface,bore wall stress and acceleration are investigated.It is shown that divided charge could greatly improve the blasting effect by engineering blasting practice.
文摘Implicit and explicit analyses were examined with experimental work done by Razaqpur et al. In the experiment work, two 1000 × 1000 × 70 mm reinforced concrete slabs were constructed. The slabs were subjected to blast loads generated by the detonation of either 22.4 kg or 33.4 kg of ANFO located at a 3.0 m standoff. Blast wave characteristics, including incident and reflected pressures and reflected impulses were measured. The slabs were modeled by implicit and explicit analysis to study their behavior under blast load to compare their predicted and observed behavior. The post-blast damage and mode of failure of each slab were observed. It was concluded that explicit analysis provides better modeling than implicit analysis.
