Spinel cubic ferrites have huge applications in me mory and high frequency devices.For the improvement of these modern devices,the magnetic coercivity,permeability,and dielectric properties of a ferrite are the import...Spinel cubic ferrites have huge applications in me mory and high frequency devices.For the improvement of these modern devices,the magnetic coercivity,permeability,and dielectric properties of a ferrite are the important issues.This article focuses on improving the magnetic coercivity,magnetic permeability,and dielectric properties of Co_(0.2)Zn_(0.3)Ni_(0.5)Eu_(x)Fe_(2-x)O_(4) ferrites,where x=0.00,0.06,and 0.10.The X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR),field emission scanning electron microscopy(FESEM),energy dispersive X-ray(EDX),vibrating sample magnetometer(VSM),and an impedance analyzer were used to characterize the structural,magnetic,and dielectric properties of the samples.The XRD patterns indicate the formation of spinel cubic structure of the samples with a secondary peak(EuFeO_(3))for Eu doped samples.The densities and porosities of the samples follow an inverse trend,where the doped samples’lattice parameters are increased with the increment of rare earth Eu concentration.The FTIR analysis also proves the spinel cubic phase of the samples.The average grain size of the ferrites is obtained via FESEM images,and it is increased from 121 to 198 nm.VSM analysis confirms that doping of the Eu content also changes other hysteresis loop properties of Co_(0.2)Zn_(0.3)Ni_(0.5)Eu_(x)Fe_(2-x)O_(4) ferrites.Particularly,the coercivity of the Eu doped samples is greater than that of the mother alloy(x=0.00).The EDX study shows that there is no impurity contamination in the ferrites.The permeability and dielectric measurements show an improved quality factor of the Eu-doped samples with low magnetic and dielectric losses.Frequency dependent resistivity and impedance analysis also show the improved nature.From the observed properties of the samples,all the investigated ferrites might be strong candidates for potential applications in memory devices,magnetic sensors,and high frequency applications.展开更多
In order to increase efficiency and avoid NH^(4+)-N pollution in the leaching process of weathered crust elution-deposited rare earth ores,the mass transfer in heap leaching with Al_(2)(SO_(4))_(3) solution was simula...In order to increase efficiency and avoid NH^(4+)-N pollution in the leaching process of weathered crust elution-deposited rare earth ores,the mass transfer in heap leaching with Al_(2)(SO_(4))_(3) solution was simulated with column elution and experimentally optimized.The results indicate that the leaching yield is also up to 99%for leaching with aluminum sulfate instead of ammonium sulfate.The optimal flow rate is 60 mL/h,the height equivalent to a theoretical plate(HETP)is 1.29 mm correspondingly.The peak value position of RE^(3+)is 60 mL/h,Fe^(3+)is 100 mL/h,however,Al^(3+)is 150 mL/h,and the heap leaching process has kinetic separation effect.展开更多
Upgrading mechanical-dielectric features of ferrites through rare-earth yttrium(Y^(3+))doping provides feasibility to evolving high-frequency electronic devices.This paper reports the mechanical and dielectric propert...Upgrading mechanical-dielectric features of ferrites through rare-earth yttrium(Y^(3+))doping provides feasibility to evolving high-frequency electronic devices.This paper reports the mechanical and dielectric properties of Co_(0.5)Cu_(0.25)Zn_(0.25)Y_(x)Fe_(2-x)O_(4)ferrite nanoparticles labeled as CCZYF#0,CCZYF#1,CCZYF#2,CCZYF#3,CCZYF#4 and CCZYF#5 for x=0.0.0.02,0.04,0.06,0.08,and 0.1,respectively.The frequency and temperature dependence of dielectric parameters and co nductivity of all CCZYF nanoferrites are well discussed.The nanoferrite CCZYF#5 has the highest dielectric constant(enhancing ratio 170%)and the highest conductivity(enhancing ratio 7125.81%)compared with the undoped sample.Nyquist plots of all CCZYF nano ferrites manifest two arcs;the main reasons for the dielectric process are the grain boundaries and bulk grains.All impedance parameters were determined,which showed the effective role of Y^(3+)ions on their values.The nanoferrite CCZYF#5 has the highest grain boundaries capacitance(with enhancing ratio of 59.40%)and the highest grains capacitance(with enhancing ratio of 22.53%)with a relaxation time decrement efficiency of 62.51%.An ultrasonic flaw detector was utilized to determine the elastic moduli of all CCZYF nanoferrites.The nanoferrite CCZYF#5 has the highest longitudinal modulus(with enhancing ratio of 20.95%),the highest shear modulus(with enhancing ratio of48.72%),highest Young's modulus(with enhancing ratio of 88.47%),the highest bulk modulus(with enhancing ratio 13.27%)and the highest micro hardness(with enhancing ratio 77.77%).Hence,Y3+tuned Co-Cu-Zn nanoferrites possess new opportunities for high-frequency and storage applications.展开更多
基金supported by the Research and Innovation Centre,Khulna University(KURC ID-47/2020)。
文摘Spinel cubic ferrites have huge applications in me mory and high frequency devices.For the improvement of these modern devices,the magnetic coercivity,permeability,and dielectric properties of a ferrite are the important issues.This article focuses on improving the magnetic coercivity,magnetic permeability,and dielectric properties of Co_(0.2)Zn_(0.3)Ni_(0.5)Eu_(x)Fe_(2-x)O_(4) ferrites,where x=0.00,0.06,and 0.10.The X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR),field emission scanning electron microscopy(FESEM),energy dispersive X-ray(EDX),vibrating sample magnetometer(VSM),and an impedance analyzer were used to characterize the structural,magnetic,and dielectric properties of the samples.The XRD patterns indicate the formation of spinel cubic structure of the samples with a secondary peak(EuFeO_(3))for Eu doped samples.The densities and porosities of the samples follow an inverse trend,where the doped samples’lattice parameters are increased with the increment of rare earth Eu concentration.The FTIR analysis also proves the spinel cubic phase of the samples.The average grain size of the ferrites is obtained via FESEM images,and it is increased from 121 to 198 nm.VSM analysis confirms that doping of the Eu content also changes other hysteresis loop properties of Co_(0.2)Zn_(0.3)Ni_(0.5)Eu_(x)Fe_(2-x)O_(4) ferrites.Particularly,the coercivity of the Eu doped samples is greater than that of the mother alloy(x=0.00).The EDX study shows that there is no impurity contamination in the ferrites.The permeability and dielectric measurements show an improved quality factor of the Eu-doped samples with low magnetic and dielectric losses.Frequency dependent resistivity and impedance analysis also show the improved nature.From the observed properties of the samples,all the investigated ferrites might be strong candidates for potential applications in memory devices,magnetic sensors,and high frequency applications.
基金Project supported by the National Natural Science Foundation of China(51964021,51774156)China’s NationalKey R&D Plan Project(2019YFC060025000)。
文摘In order to increase efficiency and avoid NH^(4+)-N pollution in the leaching process of weathered crust elution-deposited rare earth ores,the mass transfer in heap leaching with Al_(2)(SO_(4))_(3) solution was simulated with column elution and experimentally optimized.The results indicate that the leaching yield is also up to 99%for leaching with aluminum sulfate instead of ammonium sulfate.The optimal flow rate is 60 mL/h,the height equivalent to a theoretical plate(HETP)is 1.29 mm correspondingly.The peak value position of RE^(3+)is 60 mL/h,Fe^(3+)is 100 mL/h,however,Al^(3+)is 150 mL/h,and the heap leaching process has kinetic separation effect.
文摘Upgrading mechanical-dielectric features of ferrites through rare-earth yttrium(Y^(3+))doping provides feasibility to evolving high-frequency electronic devices.This paper reports the mechanical and dielectric properties of Co_(0.5)Cu_(0.25)Zn_(0.25)Y_(x)Fe_(2-x)O_(4)ferrite nanoparticles labeled as CCZYF#0,CCZYF#1,CCZYF#2,CCZYF#3,CCZYF#4 and CCZYF#5 for x=0.0.0.02,0.04,0.06,0.08,and 0.1,respectively.The frequency and temperature dependence of dielectric parameters and co nductivity of all CCZYF nanoferrites are well discussed.The nanoferrite CCZYF#5 has the highest dielectric constant(enhancing ratio 170%)and the highest conductivity(enhancing ratio 7125.81%)compared with the undoped sample.Nyquist plots of all CCZYF nano ferrites manifest two arcs;the main reasons for the dielectric process are the grain boundaries and bulk grains.All impedance parameters were determined,which showed the effective role of Y^(3+)ions on their values.The nanoferrite CCZYF#5 has the highest grain boundaries capacitance(with enhancing ratio of 59.40%)and the highest grains capacitance(with enhancing ratio of 22.53%)with a relaxation time decrement efficiency of 62.51%.An ultrasonic flaw detector was utilized to determine the elastic moduli of all CCZYF nanoferrites.The nanoferrite CCZYF#5 has the highest longitudinal modulus(with enhancing ratio of 20.95%),the highest shear modulus(with enhancing ratio of48.72%),highest Young's modulus(with enhancing ratio of 88.47%),the highest bulk modulus(with enhancing ratio 13.27%)and the highest micro hardness(with enhancing ratio 77.77%).Hence,Y3+tuned Co-Cu-Zn nanoferrites possess new opportunities for high-frequency and storage applications.