A binary available bit rate （ABR） scheme based on discrete-time variable structure control （DVSC） theory is proposed to solve the problem of asynchronous transfer mode （ATM） networks congestion in this paper. A ...A binary available bit rate （ABR） scheme based on discrete-time variable structure control （DVSC） theory is proposed to solve the problem of asynchronous transfer mode （ATM） networks congestion in this paper. A discrete-time system model with uncertainty is introduced to depict the time-varying ATM networks. Based on the system model, an asymptotically stable sliding surface is designed by linear matrix inequality （LMI）. In addition, a novel discrete-time reaching law that can obviously reduce chatter is also put forward. The proposed discrete-time variable structure controller can effectively constrain the oscillation of allowed cell rate （ACR） and the queue length in a router. Moreover, the controller is self-adaptive against the uncertainty in the system. Simulations are done in different scenarios. The results demonstrate that the controller has better stability and robustness than the traditional binary flow controller, so it is good for adequately exerting the simplicity of binary flow control mechanisms.展开更多
The explicit rate flow control mechanisms for ABR service are used to sharethe available bandwidth of a bottleneck link fairly and reasonably among many competitive users andto maintain the buffer queue length of a bo...The explicit rate flow control mechanisms for ABR service are used to sharethe available bandwidth of a bottleneck link fairly and reasonably among many competitive users andto maintain the buffer queue length of a bottleneck switch connected to the link at a desired levelin order to avoid and control congestion in ATM networks. However, designing effective flow controlmechanisms for the service is known to be difficult because of the variety of dynamic parametersinvolved such as available link bandwidth, burst of the traffic, the distances between ABR sourcesand switches. In this paper, we present a fuzzy explicit rate flow control mechanism for ABRservice. The mechanism has a simple structure and is robust in the sense that the mechanism'sstability is not sensitive to the change in the number of active virtual connections (VCs). Manysimulations show that this mechanism can not only effectively avoid network congestion, but alsoensure fair share of the bandwidth for all active VCs regardless of the number of hops theytraverse. Additionally, it has the advantages of fast convergence, low oscillation, and high linkbandwidth utilization.展开更多
For the Asynchronous Transfer Mode （ATM） networks with time-varying multiple time-delays, a more realistic model for the available bit rate （ABR） traffic class with explicit rate feedback is introduced. A fuzzy-im...For the Asynchronous Transfer Mode （ATM） networks with time-varying multiple time-delays, a more realistic model for the available bit rate （ABR） traffic class with explicit rate feedback is introduced. A fuzzy-immune controller is designed, which can adjust the rates of ABR on-line, overcome the bad effect caused by the saturation nonlinearity and satisfy the weighted fairness. Also, the sufficient condition that guarantees the stability of the closed-loop system with a fuzzy-immune controller is presented in theory for the first time. The algorithm exhibits good performance, and most importantly, has a solid theoretical foundation and can be implemented in practice easily. Simulation results show that the control system is rapid, adaptive, robust, and meanwhile, the quality of service （QoS） is guaranteed.展开更多
A Neural Network( NN ) approach to ABR flow control algorithm in ATM networks is proposed. The NN predicts the queue length, its variation and possible cell loss, then regulates the source rate adaptivel...A Neural Network( NN ) approach to ABR flow control algorithm in ATM networks is proposed. The NN predicts the queue length, its variation and possible cell loss, then regulates the source rate adaptively. Therefore, more appropriate value of the explicit rate can be determined in the corresponding field of the RM cells. This approach performs better than the traditional static feedback control. Additionally, the performance of this algorithm under CBR background traffic is discussed, and the simulatino results show that the neural network is also efficient.展开更多
Available Bit Rate (ABR) service has been developed to support data applications to asynchronous transfer mode (ATM) networks.Since a ratebased feedback flow control mechanism has been selected as a standard by ATM Fo...Available Bit Rate (ABR) service has been developed to support data applications to asynchronous transfer mode (ATM) networks.Since a ratebased feedback flow control mechanism has been selected as a standard by ATM Forum,buffering becomes an issue that needs intensive study.In this paper,the queuing performance in a switch is studied in detail.It is theoretically proven that the goals of no cell loss and full utilization of link capacity can be achieved by choosing an appropriate buffersize and threshold of the switch buffer which is supported by our simulation results of a complex network.展开更多
This article investigates the power quality enhancement in power system using one of the most famous series converter based FACTS controller like IPFC (Interline Power Flow Controller) in Power Injection Model (PIM). ...This article investigates the power quality enhancement in power system using one of the most famous series converter based FACTS controller like IPFC (Interline Power Flow Controller) in Power Injection Model (PIM). The parameters of PIM are derived with help of the Newton-Raphson power flow algorithm. In general, a sample test power system without FACTs devices has generated more reactive power, decreased real power, more harmonics, small power factor and poor dynamic performance under line and load variations. In order to improve the real power, compensating the reactive power, proficient power factor and excellent load voltage regulation in the sample test power system, an IPFC is designed. The D-Q technique is utilized here to derive the reference current of the converter and its D.C link capacitor voltage is regulated. Also, the reference voltage of the inverter is arrived by park transformation technique and its load voltage is controlled. Here, a sample 230 KV test power system is taken for study. Further as the conventional PI controllers are designed at one nominal operating point they are not competent to respond satisfactorily in dynamic operating conditions. This can be circumvented by a Fuzzy and Neural network based IPFC and its detailed Simulink model is developed using MATLAB and the overall performance analysis is carried out under different operating state of affairs.展开更多
The power consumption is rapidly increased due to ASD(Adjustable Speed Drives)and automation in industries and large consumption of electricity in domestic regions increased the concern of the power quality.The qualit...The power consumption is rapidly increased due to ASD(Adjustable Speed Drives)and automation in industries and large consumption of electricity in domestic regions increased the concern of the power quality.The quality of the power received in the distribution system is altered because of the losses in the transmission system.The losses in the transmission system are mitigated using the FACTS(Flexible AC Transmission System)controller,among these controllers UPFC(Unified Power Flow Controller)plays a vital role in controlling the shunt and series reactive powers in the bus of the power system.The conventional topology of the UPFC consists of AC-DC converter and energy stored in the DC link and DC-AC converter injected a voltage in series to the bus which is to be controlled.Whereas a new topology based on matrix converter can replace the dual converters and perform the required task.The construction of 2-bus,7-bus and IEEE-14-bus power system is designed and modeled.MC-UPFC(Matrix Converter Based Unified Power Flow Controller)is designed and constructed.The MC-UPFC is the rich topology in the FACTS which is capable of controlling both the transmission parameters simultaneously with the switching technique of direct power control by the smooth sliding control which gives less ripple in the injecting control parameters such as control voltage(Vc)and voltage angle(α).By implementing MC-UPFC the real and reactive power can be controlled simultaneously and independently.The control techniques were designed based on the PID(Proportional Integral Derivative)with sliding surface power control,FLC(Fuzzy Logic Controller)and ANN(Artificial Neural Network)and the performances of Vc andαof the controllers are investigated.Hence the sliding surface and relevant control switching state of the MC can be controlled by the FLC which gives the robust and autonomous decision made in the selection of the appropriate switching state for the effective real power control in the power system.The work has been carried out in the MATLAB Simulink simulator which gives the finest controlling features and simple design procedures and monitoring of the output.展开更多
基金the National Natural Science Foundation of China (No.60274009)Specialized Research Fund for the DoctoralProgram of Higher Education (No.20020145007)
文摘A binary available bit rate （ABR） scheme based on discrete-time variable structure control （DVSC） theory is proposed to solve the problem of asynchronous transfer mode （ATM） networks congestion in this paper. A discrete-time system model with uncertainty is introduced to depict the time-varying ATM networks. Based on the system model, an asymptotically stable sliding surface is designed by linear matrix inequality （LMI）. In addition, a novel discrete-time reaching law that can obviously reduce chatter is also put forward. The proposed discrete-time variable structure controller can effectively constrain the oscillation of allowed cell rate （ACR） and the queue length in a router. Moreover, the controller is self-adaptive against the uncertainty in the system. Simulations are done in different scenarios. The results demonstrate that the controller has better stability and robustness than the traditional binary flow controller, so it is good for adequately exerting the simplicity of binary flow control mechanisms.
文摘The explicit rate flow control mechanisms for ABR service are used to sharethe available bandwidth of a bottleneck link fairly and reasonably among many competitive users andto maintain the buffer queue length of a bottleneck switch connected to the link at a desired levelin order to avoid and control congestion in ATM networks. However, designing effective flow controlmechanisms for the service is known to be difficult because of the variety of dynamic parametersinvolved such as available link bandwidth, burst of the traffic, the distances between ABR sourcesand switches. In this paper, we present a fuzzy explicit rate flow control mechanism for ABRservice. The mechanism has a simple structure and is robust in the sense that the mechanism'sstability is not sensitive to the change in the number of active virtual connections (VCs). Manysimulations show that this mechanism can not only effectively avoid network congestion, but alsoensure fair share of the bandwidth for all active VCs regardless of the number of hops theytraverse. Additionally, it has the advantages of fast convergence, low oscillation, and high linkbandwidth utilization.
基金the open subject for Key Laboratory of Process Industry Automation of Ministry of Education.
文摘For the Asynchronous Transfer Mode （ATM） networks with time-varying multiple time-delays, a more realistic model for the available bit rate （ABR） traffic class with explicit rate feedback is introduced. A fuzzy-immune controller is designed, which can adjust the rates of ABR on-line, overcome the bad effect caused by the saturation nonlinearity and satisfy the weighted fairness. Also, the sufficient condition that guarantees the stability of the closed-loop system with a fuzzy-immune controller is presented in theory for the first time. The algorithm exhibits good performance, and most importantly, has a solid theoretical foundation and can be implemented in practice easily. Simulation results show that the control system is rapid, adaptive, robust, and meanwhile, the quality of service （QoS） is guaranteed.
文摘A Neural Network( NN ) approach to ABR flow control algorithm in ATM networks is proposed. The NN predicts the queue length, its variation and possible cell loss, then regulates the source rate adaptively. Therefore, more appropriate value of the explicit rate can be determined in the corresponding field of the RM cells. This approach performs better than the traditional static feedback control. Additionally, the performance of this algorithm under CBR background traffic is discussed, and the simulatino results show that the neural network is also efficient.
文摘Available Bit Rate (ABR) service has been developed to support data applications to asynchronous transfer mode (ATM) networks.Since a ratebased feedback flow control mechanism has been selected as a standard by ATM Forum,buffering becomes an issue that needs intensive study.In this paper,the queuing performance in a switch is studied in detail.It is theoretically proven that the goals of no cell loss and full utilization of link capacity can be achieved by choosing an appropriate buffersize and threshold of the switch buffer which is supported by our simulation results of a complex network.
文摘This article investigates the power quality enhancement in power system using one of the most famous series converter based FACTS controller like IPFC (Interline Power Flow Controller) in Power Injection Model (PIM). The parameters of PIM are derived with help of the Newton-Raphson power flow algorithm. In general, a sample test power system without FACTs devices has generated more reactive power, decreased real power, more harmonics, small power factor and poor dynamic performance under line and load variations. In order to improve the real power, compensating the reactive power, proficient power factor and excellent load voltage regulation in the sample test power system, an IPFC is designed. The D-Q technique is utilized here to derive the reference current of the converter and its D.C link capacitor voltage is regulated. Also, the reference voltage of the inverter is arrived by park transformation technique and its load voltage is controlled. Here, a sample 230 KV test power system is taken for study. Further as the conventional PI controllers are designed at one nominal operating point they are not competent to respond satisfactorily in dynamic operating conditions. This can be circumvented by a Fuzzy and Neural network based IPFC and its detailed Simulink model is developed using MATLAB and the overall performance analysis is carried out under different operating state of affairs.
文摘The power consumption is rapidly increased due to ASD(Adjustable Speed Drives)and automation in industries and large consumption of electricity in domestic regions increased the concern of the power quality.The quality of the power received in the distribution system is altered because of the losses in the transmission system.The losses in the transmission system are mitigated using the FACTS(Flexible AC Transmission System)controller,among these controllers UPFC(Unified Power Flow Controller)plays a vital role in controlling the shunt and series reactive powers in the bus of the power system.The conventional topology of the UPFC consists of AC-DC converter and energy stored in the DC link and DC-AC converter injected a voltage in series to the bus which is to be controlled.Whereas a new topology based on matrix converter can replace the dual converters and perform the required task.The construction of 2-bus,7-bus and IEEE-14-bus power system is designed and modeled.MC-UPFC(Matrix Converter Based Unified Power Flow Controller)is designed and constructed.The MC-UPFC is the rich topology in the FACTS which is capable of controlling both the transmission parameters simultaneously with the switching technique of direct power control by the smooth sliding control which gives less ripple in the injecting control parameters such as control voltage(Vc)and voltage angle(α).By implementing MC-UPFC the real and reactive power can be controlled simultaneously and independently.The control techniques were designed based on the PID(Proportional Integral Derivative)with sliding surface power control,FLC(Fuzzy Logic Controller)and ANN(Artificial Neural Network)and the performances of Vc andαof the controllers are investigated.Hence the sliding surface and relevant control switching state of the MC can be controlled by the FLC which gives the robust and autonomous decision made in the selection of the appropriate switching state for the effective real power control in the power system.The work has been carried out in the MATLAB Simulink simulator which gives the finest controlling features and simple design procedures and monitoring of the output.
