Research on Automatic Test System of Engine Blade Natural Frequency

Blades are one of the important components on aircraft engines.If they break due to vibration failure,the normal operation of the entire engine will be offected.Therefore,it is necessary to measure their natural frequency before installing them on the engine to avoid resonance.At present,most blade vibration testing systems require manual operation by operators,which has high requirements for operators and the testing process is also very cumbersome.Therefore,the testing efficiency is low and cannot meet the needs of efficient testing.To solve the current problems of low testing efficiency and high operational requirements,a high-precision and high-efficiency automatic test system is designed.The testing accuracy of this system can reach ±1%,and the testing efficiency is improved by 37% compared to manual testing.Firstly,the influence of compression force and vibration exciter position on natural frequency test is analyzed by amplitude-frequency curve,so as to calibrate servo cylinder and fourdimensional motion platform.Secondly,the sine wave signal is used as the excitation to sweep the blade linearly,and the natural frequency is determined by the amplitude peak in the frequency domain.Finally,the accuracy experiment and efficiency experiment are carried out on the developed test system,whose results verify its high efficiency and high precision.

Reducing Item Exposure in Computerized Adaptive Testing Systems Using Automatic Item Generation

This paper studies the technics of reducing item exposure by utilizing automatic item generation methods. Known test item calibration method uses item parameter estimation with the statistical data, collected during examinees prior testing. Disadvantage of the mentioned item calibration method is the item exposure; when test items become familiar to the examinees. To reduce the item exposure, automatic item generation method is used, where item models are being constructed based on already calibrated test items without losing already estimated item parameters. A technic of item model extraction method from the already calibrated and therefore exposed test items described, which can be used by the test item development specialists to integrate automatic item generation principles with the existing testing applications.

A Method for Modeling the Virtual Instrument Automatic Test System Based on the Petri Net

Virtual instrument is playing the important role in automatic test system. This paper introduces a composition of a virtual instrument automatic test system and takes the VXIbus based a test software platform which is developed by CAT lab of the UESTC as an example. Then a method to model this system based on Petri net is proposed. Through this method, we can analyze the test task scheduling to prevent the deadlock or resources conflict. At last, this paper analyzes the feasibility of this method.

An Automatic Testing System of Scheduling Strategies in Real-Time UNIX

This paper proposes a formal model of the automatic testing system for scheduling strategies in real-time UNIX and describes the algorithm of the key part of the system. The model of the system is an important technology of the automatization of software development. According to the model presented in the paper, many different kinds of automatic testing systems can be designed and developed easily. At the end of the paper, the prototype proves the feasibility of the model and design.

Automatic lifting system design and application of large load powered support test rig

This paper presented a design of an automatic lifting system. It is used for large load powered support and improves the old method wherein powered support lifting depends on manual control. This system applies a high accuracy gear shunt motor to match the flow for 4 lifting cylinders, and also allocates bypass throttles to realize automatic lifting. Through the dis- placement sensor feedback the height deviation among 4 lifting cylinders during the whole lifting process, when the deviation is up to the sitting value, the corresponding bypass throttle is operated immediately to reduce the deviation, so that the moving platform of the powered support would not be stuck. Through real application, it is shown that this system can realize automatic lifting of powered support; the lifting speed is controlled between 5 and 10 mm/s, and the final aligning accuracy is up to 1 mm.

Automatic Control of Automobile Transmission Performance Test Stand

To realize automatic control of automobile transmission performance test stand Methods The automatic control technique of the lubricant temperature,the program- controll- edautomaticshifting of the transmission,the continuous adjusting of revolution speed and load, data-acquisition and data real-time processing were adopted.Results The lubricant temperature was controlled at the set temperature ±2℃.The automatic shifting of the trans- mission is simple,reliable and accurate.The automatic adjusting of load and rotation speed is rapidandaccurate,the torque divergence is ±1N·m,the rotation speed divergence is ±5r/min Conclusion The four kinds of techniques are applied into the automobile transmission perfor- mance test stand successfully. mancetest stand successfully.

Comparative study of model tests on automatically formed roadway and gob-side entry driving in deep coal mines

Automatically formed roadway(AFR)by roof cutting with bolt grouting(RCBG)is a new deep coal mining technology.By using this technology,the broken roadway roof is strengthened,and roof cutting is applied to cut off stress transfer between the roadway and gob to ensure the collapse of the overlying strata.The roadway is automatically formed owing to the broken expansion characteristics of the collapsed strata and mining pressure.Taking the Suncun Coal Mine as the engineering background,the control effect of this new technology on roadways was studied.To compare the law of stress evolution and the surrounding rock control mechanisms between AFR and traditional gob-side entry driving,a comparative study of geomechanical model tests on the above methods was carried out.The results showed that the new technology of AFR by RCBG effectively reduced the stress concentration of the roadway compared with gob-side entry driving.The side abutment pressure peak of the solid coal side was reduced by 24.3%,which showed an obvious pressure-releasing effect.Moreover,the position of the side abutment pressure peak was far from the solid coal side,making it more beneficial for roadway stability.The deformation of AFR surrounding rock was also smaller than the deformation of the gob-side entry driving by the overload test.The former was more beneficial for roadway stability than the latter under higher stress conditions.Field application tests showed that the new technology can effectively control roadway deformation.Moreover,the technology reduced roadway excavation and avoided resource waste caused by reserved coal pillars.

2-D algebraic test for robust stability of time-delay systems with interval parameters

The robust stability test of time-delay systems with interval parameters can be concluded into the robust stability of the interval quasipolynomials. It has been revealed that the robust stability of the quasipolynomials depends on that of their edge polynomials. This paper transforms the interval quasipolynomials into two-dimensional （2-D） interval polynomials （2-D s-z hybrid polynomials）, proves that the robust stability of interval 2-D polynomials are sufficient for the stability of given quasipolynomials. Thus, the stability test of interval quasipolynomials can be completed in 2-D s-z domain instead of classical 1-D s domain. The 2-D s-z hybrid polynomials should have different forms under the time delay properties of given quasipolynomials. The stability test proposed by the paper constructs an edge test set from Kharitonov vertex polynomials to reduce the number of testing edge polynomials. The 2-D algebraic tests are provided for the stability test of vertex 2-D polynomials and edge 2-D polynomials family. To verify the results of the paper to be correct and valid, the simulations based on proposed results and comparison with other presented results are given.

Testing Forms in Web Applications Automatically

Forms enhance both the dynamic and interactive abilities of Web applications and the system complexity. And it is especially important to test forms completely and thoroughly. Therefore, this paper discusses how to carry out the form testing by different methods in the related testing phases. Namely, at first, automatically abstracting forms in the Web pages by parsing the HTML documents; then, ohtai ning the testing data with a certain strategies, such as by requirement specifications, by mining users＇ hefore input informarion or by recording meehanism; and next executing the testing actions automatically due to the well formed test cases; finally, a case study is given to illustrate the convenient and effective of these methods.

Implementation of Dynamic System Control Circuit Board Test System of Pure Electric Vehicles

The dynamic system control circuit board(DSCCB)is one of the most important components for dynamic system of pure electric vehicles. The current detection of the DSCCB is done manually, which is not only inefficient in the detection but also difficult to guarantee the data accuracy. In order to improve the detection efficiency and accuracy, a new testing system is designed by Labview. The total test time can be further reduced by about 75% compared with the results of the manual detection. In this paper, the three-parameter sine wave curve-fit algorithm theory is applied to the phase delay detection of the current sensor sampling circuit on the DSCCB. This method solves the problem of big error in the phase delay detection.

Automatic well test interpretation based on convolutional neural network for a radial composite reservoir

An automatic well test interpretation method for radial composite reservoirs based on convolutional neural network(CNN) is proposed, and its effectiveness and accuracy are verified by actual field data. In this paper, based on the data transformed by logarithm function and the loss function of mean square error(MSE), the optimal CNN is obtained by reducing the loss function to optimize the network with "dropout" method to avoid over fitting. The trained optimal network can be directly used to interpret the buildup or drawdown pressure data of the well in the radial composite reservoir, that is, the log-log plot of the given measured pressure variation and its derivative data are input into the network, the outputs are corresponding reservoir parameters(mobility ratio, storativity ratio, dimensionless composite radius, and dimensionless group characterizing well storage and skin effects), which realizes the automatic initial fitting of well test interpretation parameters. The method is verified with field measured data of Daqing Oilfield. The research shows that the method has high interpretation accuracy, and it is superior to the analytical method and the least square method.

Study on Test Compaction in High-Level Automatic Test Pattern Generation (ATPG) Platform

Advancements in semiconductor technology are making gate-level test generation more challenging. This is because a large amount of detailed structural information must be processed in the search process of automatic test pattern generation (ATPG). In addition, ATPG needs to deal with new defects caused by process variation when IC is shrinking. To reduce the computation effort of ATPG, test generation could be started earlier at higher abstraction level, which is in line with top-down design methodology that has become more popular nowadays. In this research, we employ Chen’s high-level fault model in the high-level ATPG. Besides shorter ATPG time as shown in many previous works, our study showed that high-level ATPG also contributes to test compaction. This is because most of the high-level faults correlate with the gate-level collapsed faults especially at input/output of the modules in a circuit. The high-level ATPG prototype used in our work is mainly composed by constraint-driven test generation engine and fault simulation engine. Experimental result showed that more reduced/compact test set can be generated from the high-level ATPG.

Aware Time in Bug Fix—A Novel Automatic Test Case Selection for Prioritization of Version Control

The supreme goal of the Automatic Test case selection techniques is to guarantee systematic coverage, to recognize the usual error forms and to lessen the test of redundancy. It is unfeasible to carry out all the test cases consistently. For this reason, the test cases are picked and prioritize it. The major goal of test case prioritization is to prioritize the test case sequence and finds faults as early as possible to improve the efficiency. Regression testing is used to ensure the validity and the enhancement part of the changed software. In this paper, we propose a new path compression technique (PCUA) for both old version and new version of BPEL dataset. In order to analyze the enhancement part of an application and to find an error in an enhancement part of an application, center of the tree has been calculated. Moreover in the comparative analysis, our proposed PCUA- COT technique is compared with the existing XPFG technique in terms of time consuming and error detection in the path of an enhancement part of BPEL dataset. The experimental results have been shown that our proposed work is better than the existing technique in terms of time consuming and error detection.

TestCenter在微波组件ATS中的应用

针对微波组件ATS的构建过程中遇到的核心问题,本文采用TestCenter平台和Rational统一过程相结合的开发策略。使用该开发策略构建的ATS,在满足大量参数的精确测试基础上,不仅能提高系统的适应性、开发效率和节约开发成本,而且方便系统的扩展和升级。该开发策略已在中国电科某研究所的微波组件ATS中得到应用,并取得了很好的效果。

Test Method for Evaluating the Cleaning Performance of Proteases in Automatic Dishwashing Detergent

A test method was developed to better evaluate the cleaning performance of protease in Chinese automatic dishwashing detergent(ADD)and differentiate the washing performance of different ADD formulations on protein stains.Steamed egg stain,which was a Chinese-consumers-relevant soil,was used as monitor.The response curves of the stain to different amounts of protease were measured under laboratory conditions,and the stain removal ability of commercially available ADDs was tested with this method.The results showed that the soil removal rate of ADD without protease was less than 10%,and the soil removal rate increased with the increase of protease dosage in the range of 0~2.0%.Steamed egg stain had a good response to protease,and it could effectively distinguish the cleaning performance of commercial ADDs.The test method could be used in the development,screening and evaluation of ADD formulations.

System-on-Chip Test Data Compression Based on Split-Data Variable Length (SDV) Code

System-on-a-chips with intellectual property cores need a large volume of data for testing. The large volume of test data requires a large testing time and test data memory. Therefore new techniques are needed to optimize the test data volume, decrease the testing time, and conquer the ATE memory limitation for SOC designs. This paper presents a new compression method of testing for intellectual property core-based system-on-chip. The proposed method is based on new split- data variable length (SDV) codes that are designed using the split-options along with identification bits in a string of test data. This paper analyses the reduction of test data volume, testing time, run time, size of memory required in ATE and improvement of compression ratio. Experimental results for ISCAS 85 and ISCAS 89 Benchmark circuits show that SDV codes outperform other compression methods with the best compression ratio for test data compression. The decompression architecture for SDV codes is also presented for decoding the implementations of compressed bits. The proposed scheme shows that SDV codes are accessible to any of the variations in the input test data stream.

Making your own Automatic Test Equipment has never been easier

Using Planet ATE's SOC 'all-in-one' pin electronics solutions it is easy to make your owntester, ATE or to modify load boards for more advanced test capabilities.

城轨全自动运行线路中心ATS系统智能提升方案研究

城市轨道交通全自动运行线路将列车司机的职能交由列车自动控制系统和控制中心相关系统共同完成,而运营控制模式也由传统的司机、控制中心调度员、车站值班员共同参与控制,转变为控制中心调度员直接面向列车运行进行控制。通过分析运营调度需求及既有运营调度痛点问题,针对新建线路和既有改造线路,分别提出控制中心ATS系统智能提升架构;从供电分区行车数量卡控、行车关键信息融合、全自动编图及行车评估、运维联动、故障及应急指挥等方面,提出具体实施方案,旨在提高全自动运行线路运营效率和故障处理能力。

城轨全自动运行线路ATS自动洗车功能设计与实现

自动洗车是城市轨道交通全自动运行线路的一项必备功能。为提高全自动运行项目自动洗车设计效率,减少软件开发成本,提出一种基于序列化动作的自动洗车设计方案。通过分析不同项目自动洗车需求,识别项目之间的共性和区别;设计一套ATS系统洗车流程数据配置模板,通过修改数据配置即可实现新项目的洗车功能需求;软件采用状态设计模式开发实现,仅需进行一次开发,即可根据数据配置和设备状态自动执行洗车流程。该方案在成都、上海、深圳、郑州等多条全自动运行线路的成功实践,可为类似的全自动功能设计提供思路。

机载设备通用ATS自检适配器设计

ATS已广泛应用于航空航天设备生产、保障以及导弹等武器装备的生产维护领域。针对传统的通用自动测试系统自检周期长、工作量大以及容易出错等缺点,总结系统自检的基本原则以及需注意的问题,介绍了基于PXI总线的机载设备通用ATS自检适配器的软硬件设计方法。