Autocatalytic reduction-assisted synthesis of segmented porous PtTe nanochains for enhancing methanol oxidation reaction

Morphology engineering has been developed as one of the most widely used strategies for improving the performance of electrocatalysts.However,the harsh reaction conditions and cumbersome reaction steps during the nanomaterials synthesis still limit their industrial applications.Herein,one-dimensional(1D)novel-segmented PtTe porous nanochains(PNCs)were successfully synthesized by the template methods assisted by Pt autocatalytic reduction.The PtTe PNCs consist of consecutive mesoporous architectures that provide a large electrochemical surface area(ECSA)and abundant active sites to enhance methanol oxidation reaction(MOR).Furthermore,1D nanostructure as a robust sustaining frame can maintain a high mass/charge transfer rate in a long-term durability test.After 2,000 cyclic voltammetry(CV)cycles,the ECSA value of PtTe PNCs remained as high as 44.47 m^(2)·gPt^(-1),which was much larger than that of commercial Pt/C(3.95 m^(2)·gPt^(-1)).The high catalytic activity and durability of PtTe PNCs are also supported by CO stripping test and density functional theory calculation.This autocatalytic reduction-assisted synthesis provides new insights for designing efficient low-dimensional nanocatalysts.

Variable structure control for three-variable autocatalytic reaction

In this paper, two irreversible exothermic autocatalytic reactions which carry out in continuous stirred tank reactor （CSTR） are considered. A differential-algebraic system is applied to model these chemical reactions. The stability and the dynamic behavior are studied for the differential-algebraic system. The Hopf bifurcation appears when the parameter exceeds a critical value. In order to eliminate this complex behavior, the differential-algebraic system is described by a single-input and single-output system with parameter varying within definite intervals, and then variable structure control with sliding mode based on a special power reaching law is designed to stabilize this chemical system. Numerical simulations are given to illustrate the effectiveness of the method.

Air-stable magnesium nickel hydride with autocatalytic and self-protective effect for reversible hydrogen storage

Among the factors which restrict the large-scale utilization of magnesium-based hydride as a hydrogen storage medium,the high operating temperature,slow kinetics,and air stability in particular are key obstacles.In this work,a novel method,namely hydriding combustion synthesis plus short-term mechanical milling followed by air exposure,was proposed to synthesize air stable and autocatalytic magnesium nickel hydride(Mg2NiH4),which shows excellent hydrogen absorption/desorption kinetics,capacity retention and oxidation resistance.The short-term-milled Mg2NiH4 can desorb 2.97 wt.%hydrogen within 500 s at 230℃.Even after exposure under air atmosphere for 67 days,it can still desorb 2.88 wt.%hydrogen within 500 s at 230℃.The experimental and theoretical results both indicated that the surface of as-milled Mg2NiH4 was easy to be oxidized under air atmosphere.However,the in-situ formed Ni during air exposure of Mg2NiH4 improved the hydrogen desorption kinetics,and the formed surface passivation layer maintained the hydrogen storage capacity and avoided further poisoning,which we called autocatalytic and self-protective effect.Such a novel dual effect modified the reaction activity and oxidation resistance of the air-exposed Mg2NiH4.Our findings provide useful insights into the design and preparation of air stable metal-based hydride for large-scale utilization and long-term storage.

Kinetics of the First Order Autocatalytic Decomposition Reaction of Nitrocellulose (13.86% N)

The kinetics of the first order autocatalytic decomposition reaction of nitrocellulose (NC, 13.86% N) was stud-ied by using DSC. The results show that the DSC curve for the initial 50% of conversion degree of NC can be de-scribed by the first order autocatalytic equation dy/dt=-10^(16.3)exp(-181860/RT)y-10^(16.7)exp(-173050/RT)y(1-y) and that for the latter 50% conversiondegree of NC described by the reaction equations dy/dt=-10^(16.4)exp(-154820/RT)y(n=1) and dy/dt=-10^(16.9)exp(-155270/RT)y^(2.80)(n≠1).

Kinetics of solid-state reduction of chromite overburden

The demand for alternative low-grade iron ores is on the rise due to the rapid depletion of high-grade natural iron ore resources and the increased need for steel usage in daily life.However,the use of low-grade iron ores is a constant clinical task for industry metallurgists.Direct smelting of low-grade ores consumes a substantial amount of energy due to the large volume of slag generated.This condition can be avoided by direct reduction followed by magnetic separation(to separate the high amount of gangue or refractory and metal parts)and smelting.Chromite overburden(COB)is a mine waste generated in chromite ore processing,and it mainly consists of iron,chromium,and nickel(<1wt%).In the present work,the isothermal and non-isothermal kinetics of the solid-state reduction of self-reduced pellets prepared using low-grade iron ore(COB)were thoroughly investigated via thermal analysis.The results showed that the reduction of pellets followed a firstorder autocatalytic reaction control mechanism in the temperature range of 900-1100℃.The autocatalytic nature of the reduction reaction was due to the presence of nickel in the COB.The apparent activation energy obtained from the kinetics results showed that the solid-state reactions between COB and carbon were the rate-determining step in iron oxide reduction.

Mathematical modeling of drug release from biodegradable polymeric microneedles

Transdermal drug delivery systems have overcome many limitations of other drug administration routes,such as injection pain and first-pass metabolism following oral route,although transdermal drug delivery systems are limited to drugs with low molecular weight.Hence,new emerging technology allowing high molecular weight drug delivery across the skin—known as‘microneedles’—has been developed,which creates microchannels that facilitate drug delivery.In this report,drug-loaded degradable conic microneedles are modeled to characterize the degradation rate and drug release profile.Since a lot of data are available for polylactic acid-co-glycolic acid(PLGA)degradation in the literature,PLGA of various molecular weights-as a biodegradable polymer in the polyester family-is used for modeling and verification of the drug delivery in themicroneedles.The main reaction occurring during polyester degradation is hydrolysis of steric bonds,leading to molecular weight reduction.The acid produced in the degradation has a catalytic effect on the reaction.Changes in water,acid and steric bond concentrations over time and for different radii of microneedles are investigated.To solve the partial and ordinary differential equations simultaneously,finite difference and Runge–Kutta methods are employed,respectively,with the aid of MATLAB.Correlation of the polymer degradation rate with its molecular weight and molecular weight changes versus time are illustrated.Also,drug diffusivity is related to matrix molecular weight.The molecular weight reduction and accumulative drug release within the system are predicted.In order to validate and assess the proposed model,data series of the hydrolytic degradation of aspirin(180.16 Da)-and albumin(66,000 Da)-loaded PLGA(1:1 molar ratio)are used for comparison.The proposed model is in good agreement with experimental data from the literature.Considering diffusion as themain phenomena and autocatalytic effects in the reaction,the drug release profile is predicted.Based on our results for a microneedle containing drug,we are able to estimate drug release rates before fabrication.

Various concentric-ring patterns formed in a water-anode glow discharge operated at atmospheric pressure

Pattern formation is a very interesting phenomenon formed above a water anode in atmospheric pressure glow discharge.Up to now,concentric-ring patterns only less than four rings have been observed in experiments.In this work,atmospheric pressure glow discharge above a water anode is conducted to produce diversified concentric-ring patterns.Results indicate that as time elapses,the number of concentric rings increases continuously and up to five rings have been found in the concentric-ring patterns.Moreover,the ring number increases continuously with increasing discharge current.The electrical conductivity of the anode plays an important role in the transition of the concentric patterns due to its positive relation with ionic strength.Hence,the electrical conductivity of the water anode is investigated as a function of time and discharge current.From optical emission spectrum,gas temperature and intensity ratio related with density and temperature of electron have been calculated.The various concentric-ring patterns mentioned above have been simulated at last with an autocatalytic reaction model.

谈谈如何学习线性代数

谈谈如何学习线性代数樊孝仁，闫乙伟线性代数课是大学机械、电子、化工、计算机等专业的一门重要的基础理论课程，它的任务是为各专业的基础课与专业课以及学生今后的工作，提供必要的数学基础。为了帮助各专业的学生学好这门课程，在这里根据笔者几年来的教学实践，就如...

浅谈微积分的教学特点

浅谈微积分的教学特点裴崇峻微积分是一门基础课，它的内容具有较强的连贯性和系统性，对于初等数学的基础知识要求很高，因此，很多成人学员由于年龄偏大、基础薄弱，都认为微积分是一门“抽象、乏味”的课程。教师们在如何讲授这门课方面都做了很多努力，采取了很多行之...

Effect of Adding Sb on Microstructure, Mechanical Properties and in <i>Vitro</i>Degradation Behavior of as Cast Mg-4wt% Zn Alloy for Medical Application

Magnesium (Mg) and its alloys are one of a novel kind of biodegradable metallic implants which attracted much fundamental research to develop its clinical application. Nevertheless, it has more restrictions in biomedical applications because it degrades too fast at the early stage after implantation, thus commonly leading to some problems such as early fast mechanical loss, hydric bubble aggregation, gap formation between the implants and the tissue. This work aims to study the effect of 0.5 wt% Sb addition on the microstructure, mechanical properties and degradation behavior of as cast Mg-4wt% Zn alloy. The evaluation process was conducted using optical and scanning electron microscopy, X-ray diffraction, tensile and compression tests, in addition to a corrosion study by immersing in simulated body fluid (SBF). Results showed that Sb refines the grain size of the base alloy and also enhances its mechanical properties and degradation rate as well. These were due to the formation of the secondary phase of Mg3Sb2. To get better degradation rate, the Mg-4wt% Zn and Mg-4wt% Zn-0.5wt% Sb alloys are coated with Ca-P using autocatalytic technique. The results demonstrated that the formed coat layer improves the degradation rate of samples under the condition of this study. The current study shows that Mg-4wt% Zn-0.5wt% Sb alloy has good mechanical properties and when it coated by Ca-P, it gave a better corrosion resistance that makes it ideal for biodegradable medical application.

Effect of Additional Surfaces on Ordinary Portland Cement Early-Age Hydration

Early-age hydration of Ordinary Portland Cement (OPC) was studied in the presence of two additional surfaces. Additional surfaces are known to accelerate the early-age hydration of OPC. Autocatalytic reaction modelling was used to determine acceleration mechanism of additional surfaces. Heat development of the hydration was measured with semi-adiabatic calorimetry and the results were modelled with an autocatalytic reaction. Autocatalytic reaction modelling was able to determine number of initially active nucleation sites in early-age hydration. OPC hydration followed autocatalytic reaction principles throughout induction period and accelerating period. Both of the added surfaces, limestone filler and calcium-silicate-hydrate (C-S-H) coated limestone filler accelerated the early-age hydration. According to autocatalytic modelling, the C-S-H coated filler increased the number of initially active nucleation sites. Pristine limestone filler accelerated the early-age hydration by providing the additional nucleation sites throughout the early-age hydration. The difference was explained with common theories of nucleation and crystal growth. Autocatalytic model and measured calorimeter curve started to significantly deviate at the inflection point, where the reaction mode changed. The reaction mode change depended on the average particle distance. Early-age hydration, modelled as autocatalytic reaction was able to improve understanding of OPC early-age hydration and quantify the number of initially active nucleation sites. Understanding and quantifying the acceleration mechanisms in early-age hydration will aid larger utilization of supplementary cementitious materials where understanding the early-age strength development is crucial.

Theoretical perspective on synthetic man-made life:Learning from the origin of life

Creating a man-made life in the laboratory is one of life science's most intriguing yet challenging problems.Advances in synthetic biology and related theories,particularly those related to the origin of life,have laid the groundwork for further exploration and understanding in this field of artificial life or man-made life.But there remains a wealth of quantitative mathematical models and tools that have yet to be applied to this area.In this paper,we review the two main approaches often employed in the field of man-made life:the top-down approach that reduces the complexity of extant and existing living systems and the bottom-up approach that integrates welldefined components,by introducing the theoretical basis,recent advances,and their limitations.We then argue for another possible approach,namely"bottom-up from the origin of life":Starting with the establishment of autocatalytic chemical reaction networks that employ physical boundaries as the initial compartments,then designing directed evolutionary systems,with the expectation that independent compartments will eventually emerge so that the system becomes free-living.This approach is actually analogous to the process of how life originated.With this paper,we aim to stimulate the interest of synthetic biologists and experimentalists to consider a more theoretical perspective,and to promote the communication between the origin of life community and the synthetic man-made life community.

Prokaryotic expression of Chinese bovine enterokinase catalytic subunit

Background To express in vitro the bovine enterokinase catalytic subunit (EKL) protein, which could be used in the future for the cleavage and purification of fusion proteins.Methods Bovine enterokinase catalytic subunit cDNA was obtained by RT-PCR from the duodenal mucosa of a bovine obtained at a wholesale market, and then cloned into a pUCmT cloning vector and sequenced. The desired gene fragment was inserted into a pET39b expression plasmid and the recombinant vector pET39b-EKL was transformed into E. coli BL21 (DE3). Protein expression was induced using IPTG. The recombinant DsbA-EKL was purified with His · Tag affinity chromatography, and its bioactivity was analyzed.Results Compared with the sequence deposited in GenBank, the sequence of the EKL gene cloned in the present study is correct. It was also confirmed that the nucleotide sequence of expression plasmid pET39b-EKL was correct at the conjunction site between the recombinant DMA 5' terminal multi-cloning site and the recombinant fragment. SDS-PAGE analysis indicated that the target product was about 65 kDa and represented 28% of total cell protein. Purified recombinant protein was obtained by metal chelating chromatography using a Ni-IDA resin. After desalting and changing the buffer, the crude kinase was incubated at 211 overnight and shown to have a high autocatalytic cleavage activity.Conclusion The EKL gene from a Chinese bovine has been cloned successfully and expressed. This investigation has layed the foundation for future enterokinase activity research and for further large-scale application of expression products.

Synthesis and bulk polymerization kinetics of monomer dehydroabietic acid-(2-acryloyloxy-ethoxy)-ethyl ester

A bulk polymerization monomer dehydroabietic acid-(2-acryloyloxy-ethoxy)-ethyl ester(DHADG-AC) was synthesized from dehydroabietic acid(DHA). The chemical structure of DHA-DG-AC was characterized by1~HNMR,(13)~CNMR, MS and FT-IR. The kinetics of the bulk polymerization of DHA-DG-AC was investigated by Differential Scanning Calorimeter(DSC).Two kinds of kinetic model(nth-order model and autocatalytic model) were used to investigate the polymerization process. The results showed that the experim e nt al DSC c u r ve s w e r e c o n si st e nt wi th t he computational data generated by the autocatalytic kinetic model, and the value of E_a was 95.73 k J·mol^(–1).