The joining of different light metals through friction stir welding(FSW)is gaining interest as a method to decrease weight and improve fuel efficiency.However,to ensure durability,these welded metals may require surfa...The joining of different light metals through friction stir welding(FSW)is gaining interest as a method to decrease weight and improve fuel efficiency.However,to ensure durability,these welded metals may require surface treatments to protect against corrosion or wear.This study presents a novel approach for the simultaneous delivery of two distinct corrosion inhibitors to Ti-Mg dissimilar PEO treated joints on demand.The research focuses on the synthesis,characterization,and application of cerium@polystyrene(Ce@PS)nanocontainers,which are loaded with 8-hydroxyquinoline(8-HQ)to enhance corrosion protection.The synthesis involves several key steps,including the formation of a cerium-based outer layer around polystyrene nanospheres,the selective removal of the polystyrene core to create a porous structure,and the subsequent loading of the 8-HQ inhibitor.Structural and compositional analyses,conducted using scanning transmission electron microscopy(STEM)and energy-dispersive X-ray spectroscopy(EDS),confirmed the successful incorporation of 8-HQ within the nanocontainers.Additionally,Fourier-transform infrared spectroscopy(FTIR)provided detailed information about the chemical composition of the organic materials throughout the synthesis process.Thermal decomposition analysis verified the successful fabrication and stability of the dual-shell nanocontainers.Corrosion tests on Ti-Mg joints treated with plasma electrolytic oxidation(PEO)coatings and loaded nanocontainers demonstrated sig-nificantly improved corrosion resistance compared to untreated joints.This research highlights the potential of dual-shell nanocontainers,containing both organic and inorganic inhibitors,to offer prolonged corrosion protection,particularly against galvanic corrosion in dissimilar joints.The findings suggest that these synthesized nanocontainers hold promise for various industrial applications,particularly in the context of friction stir welded(FSW)Ti-Mg dissimilar joints,providing valuable insights for the development of advanced materials designed to mitigate corrosion.展开更多
Direct current pulsed metal inert-gas （DC-PMIG） welding was carried out on AZ31B magnesium alloy to obtain continuous welding joints of 3 mm and 8 mm thickness with 1.6 mm diameter of filler wire. The behavior and m...Direct current pulsed metal inert-gas （DC-PMIG） welding was carried out on AZ31B magnesium alloy to obtain continuous welding joints of 3 mm and 8 mm thickness with 1.6 mm diameter of filler wire. The behavior and mechanism of metal transfer, the parameter ranges of stable welding process, the microstructure and mechanical properties of magnesium alloy were investigated. The results show that the metal transfer form of magnesium alloy using DC-PMIG welding is realized in modes of globular transfer, projected transfer and spray transfer. Welding spatter with a large size will be produced in the mode of globular transfer, and high-quality joints with few spatters can be obtained in the mode of projected transfer and spray transfer when the linear energy of filler wire is 242-27l J/cm, droplet diameter is 1.6-0.9 mm tensile strength of weld beads is 94.2% of that of base metals. and transition frequency is 30-69 Hz. The average ultimate展开更多
Two dissimilar magnesium(Mg)alloy sheets,one with low aluminium(AZ31)and another with high aluminium(AZ91)content,were successfully joined by friction stir welding(FSW).The effect of process parameters on the formatio...Two dissimilar magnesium(Mg)alloy sheets,one with low aluminium(AZ31)and another with high aluminium(AZ91)content,were successfully joined by friction stir welding(FSW).The effect of process parameters on the formation of hot cracks was investigated.A sound metallurgical joint was obtained at optimized process parameters(1400 rpm with 25 mm/min feed)which contained fine grains and distributed β(Mg_(17)Al_(12))phase within the nugget zone.An increasing trend in the hardness measurements has also confirmed more amount of dissolution of aluminium within the nugget zone.A sharp interface between nugget zone and thermo mechanical affected zone(TMAZ)was clearly noticed at the AZ31 Mg alloy side(advancing)but not on the AZ91 Mg alloy side(retreating).From the results it can be concluded that FSW can be effectively used to join dissimilar metals,particularly difficult to process metals such as Mg alloys,and hot cracking can be completely eliminated by choosing appropriate process parameters to achieve sound joint.展开更多
The joining of Mg alloy to steel was realized by metal inert-gas arc welding, and the weld thermal cycle characteristics and Mg-steel joints were investigated. The results show that the temperature distribution in the...The joining of Mg alloy to steel was realized by metal inert-gas arc welding, and the weld thermal cycle characteristics and Mg-steel joints were investigated. The results show that the temperature distribution in the joints is uneven. Mg alloy welds present a fine equiaxed grain structure. There exists a transition layer consisting mainly of AlFe, AlFe3 and Mg（Fe, Al）2O4 phases at Mg/steel interface, and it is the weakest link in Mg？steel joints. The welding heat input and weld Al content have the significant effect on the joint strength. The joint strength increases with increasing the heat input from 1680 J/cm to 2093 J/cm, due to promoting Mg/steel interface reaction. When weld Al content is increased to 6.20%, the joint strength reaches 192 MPa, 80% of Mg alloy base metal strength. It is favorable to select the suitable welding heat input and weld Al content for improving joint strength.展开更多
The joining of AZ31B Mg alloy to 6061 Al alloy was investigated at different joining temperatures by vacuum diffusion bonding method. The microstructures of Mg/Al dissimilar joints were studied by means of optical mic...The joining of AZ31B Mg alloy to 6061 Al alloy was investigated at different joining temperatures by vacuum diffusion bonding method. The microstructures of Mg/Al dissimilar joints were studied by means of optical microscopy （OM）, scanning electron microscopy （SEM） and energy dispersive X-ray （EDX）. The results show that the thickness of each layer in the diffusion zone increases with the increase of joining temperature, and the microstructure changes obviously. At joining temperature of 440 °C, the diffusion zone is composed of Mg2Al3 layer and Mg17Al12 layer. At joining temperatures of 460 and 480 °C, the diffusion zone is composed of Mg2Al3 layer, Mg17Al12 layer, eutectic layer of Mg17Al12 and Mg-based solid solution. The width of high-hardness zone in the joint increases with increasing joining temperature, and the micro-hardnesses at different locations in the diffusion zone are significantly different. The joining temperature of 440 °C offers the highest tensile strength of 37 MPa, and the corresponding joint exhibits brittle fracture at the intermetallic compound layer of Mg17Al12.展开更多
This paper focuses on the research on double-electrode gas metal arc welding(DE-GMAW) of AZ31 B magnesium alloy sheet with 2 mm thickness. During the welding process, stable hybrid arc of metal inert gas(MIG) and tung...This paper focuses on the research on double-electrode gas metal arc welding(DE-GMAW) of AZ31 B magnesium alloy sheet with 2 mm thickness. During the welding process, stable hybrid arc of metal inert gas(MIG) and tungsten inert gas(TIG) is employed as welding heat source. Optical and electron microscopes are used to observe the microstructures of the weld joint. X-ray diffraction(XRD) and energy dispersive spectroscopy(EDS) are employed to identify the components in fusion zone. Microhardness is also tested. When the MIG current is 80 A, the perfect weld joint is obtained, though figures of fish scales are observed in all joints in the research. The fusion zone is formed by dendrites, where β-Mg17(Al, Zn)12is dispersed. The hardness in fusion zone and heat affected zone(HAZ) is lower than that in base metal(BM). The average Vickers hardness of fusion zone and HAZ is about 58 and 56 respectively, while the Vickers hardness of BM is about 63.展开更多
文摘The joining of different light metals through friction stir welding(FSW)is gaining interest as a method to decrease weight and improve fuel efficiency.However,to ensure durability,these welded metals may require surface treatments to protect against corrosion or wear.This study presents a novel approach for the simultaneous delivery of two distinct corrosion inhibitors to Ti-Mg dissimilar PEO treated joints on demand.The research focuses on the synthesis,characterization,and application of cerium@polystyrene(Ce@PS)nanocontainers,which are loaded with 8-hydroxyquinoline(8-HQ)to enhance corrosion protection.The synthesis involves several key steps,including the formation of a cerium-based outer layer around polystyrene nanospheres,the selective removal of the polystyrene core to create a porous structure,and the subsequent loading of the 8-HQ inhibitor.Structural and compositional analyses,conducted using scanning transmission electron microscopy(STEM)and energy-dispersive X-ray spectroscopy(EDS),confirmed the successful incorporation of 8-HQ within the nanocontainers.Additionally,Fourier-transform infrared spectroscopy(FTIR)provided detailed information about the chemical composition of the organic materials throughout the synthesis process.Thermal decomposition analysis verified the successful fabrication and stability of the dual-shell nanocontainers.Corrosion tests on Ti-Mg joints treated with plasma electrolytic oxidation(PEO)coatings and loaded nanocontainers demonstrated sig-nificantly improved corrosion resistance compared to untreated joints.This research highlights the potential of dual-shell nanocontainers,containing both organic and inorganic inhibitors,to offer prolonged corrosion protection,particularly against galvanic corrosion in dissimilar joints.The findings suggest that these synthesized nanocontainers hold promise for various industrial applications,particularly in the context of friction stir welded(FSW)Ti-Mg dissimilar joints,providing valuable insights for the development of advanced materials designed to mitigate corrosion.
基金Project (IRT1008) supported by Changjiang Scholars and Innovative Research Team in University, ChinaProject (51005035) supported by the National Natural Science Foundation of ChinaProject (51025520) supported by the National Natural Science Funds for Distinguished Young Scholar, China
文摘Direct current pulsed metal inert-gas （DC-PMIG） welding was carried out on AZ31B magnesium alloy to obtain continuous welding joints of 3 mm and 8 mm thickness with 1.6 mm diameter of filler wire. The behavior and mechanism of metal transfer, the parameter ranges of stable welding process, the microstructure and mechanical properties of magnesium alloy were investigated. The results show that the metal transfer form of magnesium alloy using DC-PMIG welding is realized in modes of globular transfer, projected transfer and spray transfer. Welding spatter with a large size will be produced in the mode of globular transfer, and high-quality joints with few spatters can be obtained in the mode of projected transfer and spray transfer when the linear energy of filler wire is 242-27l J/cm, droplet diameter is 1.6-0.9 mm tensile strength of weld beads is 94.2% of that of base metals. and transition frequency is 30-69 Hz. The average ultimate
文摘Two dissimilar magnesium(Mg)alloy sheets,one with low aluminium(AZ31)and another with high aluminium(AZ91)content,were successfully joined by friction stir welding(FSW).The effect of process parameters on the formation of hot cracks was investigated.A sound metallurgical joint was obtained at optimized process parameters(1400 rpm with 25 mm/min feed)which contained fine grains and distributed β(Mg_(17)Al_(12))phase within the nugget zone.An increasing trend in the hardness measurements has also confirmed more amount of dissolution of aluminium within the nugget zone.A sharp interface between nugget zone and thermo mechanical affected zone(TMAZ)was clearly noticed at the AZ31 Mg alloy side(advancing)but not on the AZ91 Mg alloy side(retreating).From the results it can be concluded that FSW can be effectively used to join dissimilar metals,particularly difficult to process metals such as Mg alloys,and hot cracking can be completely eliminated by choosing appropriate process parameters to achieve sound joint.
文摘The joining of Mg alloy to steel was realized by metal inert-gas arc welding, and the weld thermal cycle characteristics and Mg-steel joints were investigated. The results show that the temperature distribution in the joints is uneven. Mg alloy welds present a fine equiaxed grain structure. There exists a transition layer consisting mainly of AlFe, AlFe3 and Mg（Fe, Al）2O4 phases at Mg/steel interface, and it is the weakest link in Mg？steel joints. The welding heat input and weld Al content have the significant effect on the joint strength. The joint strength increases with increasing the heat input from 1680 J/cm to 2093 J/cm, due to promoting Mg/steel interface reaction. When weld Al content is increased to 6.20%, the joint strength reaches 192 MPa, 80% of Mg alloy base metal strength. It is favorable to select the suitable welding heat input and weld Al content for improving joint strength.
基金Project (51075214) supported by the National Natural Science Foundation of China
文摘The joining of AZ31B Mg alloy to 6061 Al alloy was investigated at different joining temperatures by vacuum diffusion bonding method. The microstructures of Mg/Al dissimilar joints were studied by means of optical microscopy （OM）, scanning electron microscopy （SEM） and energy dispersive X-ray （EDX）. The results show that the thickness of each layer in the diffusion zone increases with the increase of joining temperature, and the microstructure changes obviously. At joining temperature of 440 °C, the diffusion zone is composed of Mg2Al3 layer and Mg17Al12 layer. At joining temperatures of 460 and 480 °C, the diffusion zone is composed of Mg2Al3 layer, Mg17Al12 layer, eutectic layer of Mg17Al12 and Mg-based solid solution. The width of high-hardness zone in the joint increases with increasing joining temperature, and the micro-hardnesses at different locations in the diffusion zone are significantly different. The joining temperature of 440 °C offers the highest tensile strength of 37 MPa, and the corresponding joint exhibits brittle fracture at the intermetallic compound layer of Mg17Al12.
基金the National Natural Science Foundation of China(No.61165008)the Scientific Research Foundation for Returned Scholars of Ministry of Education of China(No.13006199)
文摘This paper focuses on the research on double-electrode gas metal arc welding(DE-GMAW) of AZ31 B magnesium alloy sheet with 2 mm thickness. During the welding process, stable hybrid arc of metal inert gas(MIG) and tungsten inert gas(TIG) is employed as welding heat source. Optical and electron microscopes are used to observe the microstructures of the weld joint. X-ray diffraction(XRD) and energy dispersive spectroscopy(EDS) are employed to identify the components in fusion zone. Microhardness is also tested. When the MIG current is 80 A, the perfect weld joint is obtained, though figures of fish scales are observed in all joints in the research. The fusion zone is formed by dendrites, where β-Mg17(Al, Zn)12is dispersed. The hardness in fusion zone and heat affected zone(HAZ) is lower than that in base metal(BM). The average Vickers hardness of fusion zone and HAZ is about 58 and 56 respectively, while the Vickers hardness of BM is about 63.
