SYNTHESIS OF POLYBUTADIENE MACROINITIATOR AND POLYBUTADIENE/POLYACRYLAMIDE BLOCK COPOLYMERS

An azo-group containing polybutadiene macroinitiator was prepared by Pinner synthesis and characterized by IR, NMR, GPC, viscosity and elemental measurements. The macroinitiator was further use to polymerize acrylamide (AAm) in benzene to form polybutadiene/polyacrylamide (PBD/PAAm) block copolymers. High conversion of AAm was obtained over a wide range of monomer/macroinitiator ratios. The PBD/PAAm block copolymers were found to have excellent solvent resistance.

以高顺式聚丁二烯为软段的三嵌段共聚物的制备

从高顺式端羟基聚丁二烯(HTPB)出发,分别以ε-己内酯和苯乙烯为单体合成了2类以高顺式聚丁二烯为软段的三嵌段共聚物.以高顺式HTPB为大分子引发剂、辛酸亚锡为催化剂,引发ε-己内酯的开环聚合,合成了聚己内酯-b-聚丁二烯-b-聚己内酯三嵌段共聚物(CLBCL);通过高顺式HTPB末端羟基与2-溴代异丁酰溴(BBi B)间的酯化反应制备了ATRP大分子引发剂(Bi B-PB-Bi B),进而引发苯乙烯进行电子转移活化再生催化剂原子转移自由基聚合(ARGET ATRP)反应,合成了聚苯乙烯-b-聚丁二烯-b-聚苯乙烯三嵌段共聚物(SBS),反应具有较好的可控性,产物分子量分布较窄.通过红外光谱(FTIR)、核磁共振氢谱(1H-NMR)和碳谱(13CNMR)、热重分析(TGA)和示差扫描量热分析(DSC)等对所制备共聚物的结构和性能进行了测试表征.TGA曲线表明,提高聚己内酯链段的含量,可在一定程度上提高CLBCL共聚物的热稳定性;SBS共聚物的热分解过程表现为一个阶段,与HTPB相比,其热稳定性略有提高.从CLBCL共聚物的DSC曲线上可明显观察到聚丁二烯链段的玻璃化转变温度和聚己内酯链段的熔点;SBS共聚物具有2个玻璃化转变温度,为–104.1和102.4oC,分别对应于聚丁二烯链段和聚苯乙烯链段的玻璃化转变温度.