Experimental Abrasion Study of the Evolution of Gold Morphological Criteria in Different Sediments as a Function of Time

The use of gold as a tracer element for understanding the mode of emplacement of these formations requires a good knowledge of its dynamics. To this end, we have carried out experimental studies to investigate the evolution of contour states (regular, irregular), surface states (blunt, rough), shape (elongation) and dimension (size). The study of these criteria is carried out on SEM photos of particles, taken before and after the experiment, using Aphelion image processing software. Five experiments were carried out to study the influence of sediment granulometry and water dilution on particle morphological changes. The results of these experiments show that coarse sediments (>1 mm) are largely responsible for morphological changes in gold. They cause fragmentation and/or folding of the particle edges, depending on the magnitude of the impact forces. Strong impacts due to high water dilution cause staking on the particle surface. Fine sediments (<1 mm) slow down particle evolution as they cushion impacts and particles tend to flatten rather than fragment.

Performance comparison of training algorithms for the estimation of B?hme abrasion resistance using neural networks

Natural stones used as floor and wall coverings are exposed to many different abrasive forces,so it is essential to choose suitable materials for wear resistance in terms of the life of the structure.The abrasion resistance of natural stones can be determined in the laboratory by applying the B?hme abrasion resistance(BAR)test.However,the direct analysis of BAR in the laboratory has disadvantages such as wasting time and energy,experimental errors,and health impacts.To eliminate these disadvantages,the estimation of BAR using artificial neural networks(ANN)was proposed.Different natural stone samples were collected from Türkiye,and uniaxial compressive strength(UCS),flexural strength(FS),water absorption rate(WA),unit volume weight(UW),effective porosity(n),and BAR tests were carried out.The outputs of these tests were gathered and a data set,consisting of a total of 105 data,was randomly divided into two groups:testing and training.In the current study,the success of three different training algorithms of Levenberg-Marquardt(LM),Bayesian regularization(BR),and scaled conjugate gradient(SCG)were compared for BAR prediction of natural stones.Statistical criteria such as coefficient of determination(R~2),mean square error(MSE),mean square error(RMSE),and mean absolute percentage error(MAPE),which are widely used and adopted in the literature,were used to determine predictive validity.The findings of the study indicated that ANN is a valid method for estimating the BAR value.Also,the LM algorithm(R~2=0.9999,MSE=0.0001,RMSE=0.0110,and MAPE=0.0487)in training and the BR algorithm(R~2=0.9896,MSE=0.0589,RMSE=0.2427,and MAPE=1.2327)in testing showed the best prediction performance.It has been observed that the proposed method is quite practical to implement.Using the artificial neural networks method will provide an advantage in similar laborintensive experimental studies.

RESEARCH ON ABRASION OF DEBRIS FLOW TO HIGH-SPEED DRAINAGE STRUCTURE

As one weak topic in research of debris flow,abrasion of debris flow shortens obviously application life of control structure composed of concrete.High_speed drainage structure,one of the most effective techniques to control giant debris flow disaster,has shortened one_third application life due to abrasion by debris flow.Based on velocity calculation method founded by two_phase theory,research of abrasion mechanism of debris flow to high_speed drainage structure was made.The mechanism includes both abrasion mechanism of homogeneous sizing and shearing mechanism of particle of debris flow to high_speed drainage trough structure.Further abrasion equations of both sizing and particle were established by Newton movement theory of debris flow.And abrasion amount formula of the high_speed drainage trough structure is set up by dimensional analysis.Amount to calculating in the formula is consistent with testing data in_situ,which is valuable in design of high_speed drainage structure.

Optimizing the Diameter of Plugging Balls in Deep Shale Gas Wells

Deep shale gas reserves that have been fractured typically have many relatively close perforation holes. Due to theproximity of each fracture during the formation of the fracture network, there is significant stress interference,which results in uneven fracture propagation. It is common practice to use “balls” to temporarily plug fractureopenings in order to lessen liquid intake and achieve uniform propagation in each cluster. In this study, a diameteroptimization model is introduced for these plugging balls based on a multi-cluster fracture propagationmodel and a perforation dynamic abrasion model. This approach relies on proper consideration of the multiphasenature of the considered problem and the interaction force between the involved fluid and solid phases. Accordingly,it can take into account the behavior of the gradually changing hole diameter due to proppant continuousperforation erosion. Moreover, it can provide useful information about the fluid-dynamic behavior of the consideredsystem before and after plugging. It is shown that when the diameter of the temporary plugging ball is1.2 times that of the perforation hole, the perforation holes of each cluster can be effectively blocked.

A novel approach of jet polishing for interior surface of small-grooved components using three developed setups

It is a challenge to polish the interior surface of an additively manufactured component with complex structures and groove sizes less than 1 mm.Traditional polishing methods are disabled to polish the component,meanwhile keeping the structure intact.To overcome this challenge,small-grooved components made of aluminum alloy with sizes less than 1 mm were fabricated by a custom-made printer.A novel approach to multi-phase jet(MPJ)polishing is proposed,utilizing a self-developed polisher that incorporates solid,liquid,and gas phases.In contrast,abrasive air jet(AAJ)polishing is recommended,employing a customized polisher that combines solid and gas phases.After jet polishing,surface roughness(Sa)on the interior surface of grooves decreases from pristine 8.596μm to 0.701μm and 0.336μm via AAJ polishing and MPJ polishing,respectively,and Sa reduces 92%and 96%,correspondingly.Furthermore,a formula defining the relationship between linear energy density and unit defect volume has been developed.The optimized parameters in additive manufacturing are that linear energy density varies from 0.135 J mm^(-1)to 0.22 J mm^(-1).The unit area defect volume achieved via the optimized parameters decreases to 1/12 of that achieved via non-optimized ones.Computational fluid dynamics simulation results reveal that material is removed by shear stress,and the alumina abrasives experience multiple collisions with the defects on the heat pipe groove,resulting in uniform material removal.This is in good agreement with the experimental results.The novel proposed setups,approach,and findings provide new insights into manufacturing complex-structured components,polishing the small-grooved structure,and keeping it unbroken.

Abrasion test of flexible protective materials on hydraulic structures

In this study, several kinds of flexible protective materials sprayed with polyurea elastomers （hereinafter referred to as polyurea elastomer protective material） were adopted to meet the abrasion resistance requirement of hydraulic structures, and their abrasion resistances against the water flow with suspended load or bed load were studied systematically through tests. Natural basalt stones were adopted as the abrasive for simulation of the abrasion effect of the water flow with bed load, and test results indicate that the basalt stone is suitable for use in the abrasion resistance test of the flexible protective material. The wear process of the polyurea elastomer protective material is stable, and the wear loss is linear with the time of abrasion. If the wear thickness is regarded as the abrasion resistance evaluation factor, the abrasion resistance of the 351 pure polyurea is about twice those of pure polyurea with a high level of hardness and aliphatic polyurea, and over five times that of high-performance abrasion-resistant concrete under the abrasion of the water flow with suspended load. It is also about 50 times that of high-performance abrasion-resistant concrete under the abrasion of the water flow with bed load. Overall, the abrasion resistance of pure polyurea presented a decreasing trend with increasing hardness. Pure polyurea with a Shore hardness of D30 has the best abrasion resistance, which is 60 to 70 times that of high-performance abrasion-resistant concrete under the abrasion of the water flow with bed load, and has been recommended, among the five kinds of pure polyurea materials with different hardness, in anti-abrasion protection of hydraulic structures.

Crystalline texture evolution, control of the tribocorrosion behavior, and significant enhancement of the abrasion properties of a Ni-P nanocomposite coating enhanced by zirconia nanoparticles

This paper describes an investigation of the effect of ZrO2 nanoparticles on the abrasive properties,crystalline texture developments,and tribocorrosion behavior of Ni-P nanostructured coatings.In the investigation,Ni-P and Ni-P-ZrO2 nanostructured coatings are deposited on St52 steel via the electroless method.Transmission electron microscopy(TEM),field emission scanning electron microscopy(FE-SEM),X-ray diffraction(XRD),energy dispersive spectroscopy(EDS),cyclic-static polarization tests in 3.5wt%NaCl solution,the tribocorrosion test(by back-and-forth wear in electrochemical cell),and the microhardness test using the Vickers method were performed to characterize and analyze the deposited coatings.The results of this study showed that the addition of ZrO2 nanoparticles to the Ni-P electroless bath produced the following:a sharp increase in wear and hardness resistance,the change of the wear mechanism from sheet to adhesive mode,the reduction of pitting corrosion resistance,significant reduction in the tribocorrosion protective properties,change in the preferred orientation of the crystalline texture coating from(111)to(200),increase in the sedimentation rate during the deposit process,and a sharp increase in the thickness of the Ni-P nanostructured coatings.

Orbital-abrasion-assisted Electroforming of Non-rotating Parts

A novel technique of electroforming with orbital moving cathode was carried out for the fabrication of non-rotating thin-walled parts.This technique features a large number of insulating and insoluble hard particles as a real-time polishing to the cathode.When cathode moves,hard particles polish its surface and provide the nickel non-rotating parts with near-mirror finishing.Morphology,microstructure,surface roughness and micro hardness of deposits fabricated by novel method were studied in contrast with the sample produced by traditional electroforming methods.Theoretical analysis and experimental results showed that the novel technique could effectively remove the hydrogen bubbles and nodules,disturb the crystal nucleation,and refine the grains of layer.The mechanical properties were significantly improved over traditional method.The micro-hardness of the layer was in a uniform distribution ranging from 345 HV to 360 HV.It was confirmed that this technique had practical significance to non-rotating thin-walled parts.

Influence of secondary carbide precipitation and transformation on abrasion resistance of a 3Cr15Mo1V1.5 white iron

The relationship between the secondary carbide precipitation and transformation of the 3Cr15Mo1V1.5 white iron and abrasion resistance was investigated by using optical microscope （OM）, transmission electron microscopy （TEM） and X-ray diffrac- tion （XRD）. The results show that the properties of secondary carbides precipitated at holding stage play an important role in the abrasion resistance. After certain holding time at 833 K subcritical treatment, the grainy （Fe, Cr）23C6 carbide precipitated and the fresh martensite transformed at the holding stage for 3Cr15Mo1V1.5 white iron improve the bulk hardness and abrasion resistance of the alloy. Prolonging holding time, MoC and （Cr, V）2C precipitations cause the secondary hardening peak and the corresponding better abrasion resistance. Finally, granular （Fe, Cr）23C6 carbide in situ transforms into laminar M3C carbide and the matrix structure transforms into pearlitic matrix. These changes weaken hardness and abrasion resistance of the alloy sharply.

Influences of Polypropylene Fiber and SBR Polymer Latex on Abrasion Resistance of Cement Mortar

Influences of polypropylene （PP） fiber and styrene-butadiene rubber （SBR） polymer latex on the strength performance, abrasion resistance of cement mortar were studied. The experimental results show that the flexural strength, brittleness index （σF/σC） and abrasion resistance can be improved significantly by the addition of PP fiber and SBR polymer latex. The relationship between the flexural strength and abrasion resistance was analyzed, showing a good linear relationship between them. The reinforced mechanism of PP fiber and SBR polymer latex on cement mortar was analyzed by some microscopic tests. The test results show that the addition of SBR polymer latex has no significant influence on the cement hydration after 7 d curing. Adding SBR polymer latex into cement mortar can form a polymer transition layer in the interfaces of PP fiber and cement hydrates, which improves the bonding properties between the PP fiber and cement mortar matrix effectively.

Research on Prediction Model for Erosion and Abrasion of Barrel Based on LSSVM

To predict the erosion and abrasion of high bore pressure tank gun barrel, the least square support vector machine (LSSVM) algorithm was used. Based on the gun firing test data, the prediction model for barrel's erosion and abrasion was established. It was adopted to predict the wear increment of gun barrel. The results show that the prediction values given by the model coincide with the measured data better, and the model can predict the barrel's wear accurately and rapidly.

Influence of Impact Energy on Impact Corrosion-abrasion of High Manganese Steel

The impact corrosion-abrasion properties and mechanism of high manganese steel were investigated under different impact energies. The result shows that the wearability of the steel decreases with the increase of the impact energy. The dominant failure mechanism at a lower impact energy is the rupture of extrusion edge along root and a slight shallow-layer spalling. It transforms to shallow-layer fatigue flaking along with serious corrosion-abrasion when the impact energy is increased, and finally changes to bulk flaking of hardened laver caused by deeo work-hardening and heaw corrosion-abrasion.

BEHAVIOURS OF AUSTEN1TE UNDER IMPACT ABRASION

The role of austenite in impact-abrasion process was studied on the basis of the impact-abrasion test results of a newly developed austenite-bainitic ferrite dual-phase abrasion-resistant steel with high strength,high toughness and high strain-hardening ability. It is found that the morphology,distribution and mechanical stability,rather than the volume fraction,of austenite govern the impact abrasion behaviour.Only the appropriate amount of fine and evenly dispersed austenite with adequate mechanical stability in high strength matrices,contribute effectively to the irnpact-abrasion resistance of the materials.While large quantity of coarse austenite with poor mechanical stability,especially when it acted as a continuous matrix of the material,is extremely detrimental to impact-abrasion resistance.

TREATMENT OF ADVERSE REACTIONS FOLLOWING FACIAL COSMETIC SURGICAL ABRASION WITH AURICULAR PELLET PRESSURE

Cutaneous surgical abrasion is a cos-metic procedure developed in recent years.The process is to remove scars or othercutaneous lesions on the face for cosmeticpurposes by a high speed abrasive grindinghead.Since the operation brings mechanicaltrauma to the skin,adverse reactions such aspain,serous exudation or edematous swell-ing often ensue.The routine remedy hasbeen administration of sedatives,analgesics,antibiotics or steroids that may take

The Abrasion-resistance Investigation of Rubberized Concrete

The abrasion resistance properties of rubberized concrete were comparatively studied by taking silica fume and crumb tire rubber as the additives. The abrasion tests were conducted in accordance with the Chinese standard test method DL/T 5150 - 2001, two recommended test methods： under water method and ring method, were used. The crumb tire rubbers with the sieve size of 8-mesh and 16-mesh were incorporated into the concrete by replacing same volume of sand and as an additive. The abrasion resistance of concrete was evaluated according to the abrasion resistance strength and the mass loss. Test results show that the addition of silica fume enhanced both compressive strength and abrasion resistance of concrete, and the addition of crumb rubber reduced the compressive strength but increased notably the abrasion resistance of the concrete. Silica fume concrete performed a better abrasion resistance than control concrete, and the rubberized concrete performed a much better abrasion resistance than silica fume concrete. The abrasion resistance of rubberized concrete increased with the increase of rubber content.

Effect of Fe content on the friction and abrasion properties of copper base overlay on steel substrate by TIG welding

Copper base alloy was overlaid onto 35CrMnSiA steel plate by tungsten inert gas （TIG） welding method. The heat transfer process was simulated, the microstructures of the copper base overlay were analyzed by scanning electron microscopy （SEM） and energy dispersive spectrometer （EDS）, and the friction and abrasion properties of the overlay were measured. The results show that the Fe content increases in the overlay with increasing the welding current. And with the increase of Fe content in the overlay, the friction coefficient increases and the wear mechanism changes from oxidation wear to abrasive wear and plough wear, which is related to the size and quantity of Fe grains in the overlay. While with the increase of Fe content in the overlay, the protection of oxidation layer against the oxidation wear on the melted metal decreases.

Relations of abrasion resistance and hardness of 16Cr-3C white irons with retained austenite content

The relationship between the retained austenite content of the matrix in16Cr-3C white irons and the abrasion resistance was investigated. The results show that: (1) theabrasion resistance can be improved by sub-critical heat treatment, which could be attributed to thedecrease of the retained austenite content; (2) both the abrasion resistance and hardness can beimproved by controlling the retained austenite content below 20 percent-30 percent and arrive at themaximum when the retained austenite content is reduced to about 10 percent; (3) the abrasionresistance decreases abruptly once the retained austenite content is lower than 10 percent, whichstems from both the in situ transformation of (Fe, Cr)_(23)C_6 to M_3C carbides and the formation ofpearlitic matrix.

Effect of TiO2 Filler Loading on Physico-Mechanical Properties and Abrasion of Jute Fabric Reinforced Epoxy Composites

Mechanical properties and abrasive wear behaviour of bi-directional jute fabric reinforced epoxy (J/Ep) with micron sized TiO2 particles at different wt% (2.5, 5, 7.5 and 10) were investigated. The tribo-potential of combined effect of TiO2 and jute fiber in epoxy (J/Ep) for enhancing the abrasion resistance has not been studied so far. Hence, the present work aims to explore the possibility of using TiO2 filler and jute fiber to reinforce the epoxy and thus open a new way to implement inexpensive reinforcements and produce new candidate tribo-material for industrial applications. Silane treated TiO2 filled J/Ep composites were prepared by hand lay-up method. Selected mechanical properties and three-body abrasive wear tests were evaluated as per ASTM standards. Results indicate an enhancement in the J/Ep composite mechanical properties due to addition of TiO2 particles up to 7.5 wt% of loading. Highest tensile and flexural properties were found at 7.5 wt% TiO2 loading. Results of abrasion tests show resistance to abrasion at 5 wt% TiO2 filled J/Ep composite. Scanning electron micrographs evidenced that the fiber and filler have fairly good bonding with matrix. Finally, this investigation confirms the applicability of TiO2 as secondary reinforcement in J/Ep composite.

Reliability of Sawai's classification for dental cervical abrasions:A pilot study

AIM To test the reliability of the Sawai’s classification for dental cervical abrasions.METHODSIntraoral photographs of 70 teeth from 23 patients with tooth abrasions were taken by the first examiner MS.The teeth were marked and the photos were maintained in a soft copy sequentially.Two other examiners FA and SC were trained in the use of the classification and any clarifications needed were provided at the beginning of the study.Each examiner was then given the soft copy of the complied photographs and was asked to classify the dental cervical abrasion according to their understanding of the Sawai’s classification.They were given sheets to write their responses for every marked tooth.All the examiners were blinded to each other’s observations which were then tested for inter-rater agreement among the three examiners.RESULTSThe 70 teeth with tooth abrasions from 23 patients were examined by 3 investigators(MS,FA and SC)to test the reliability of the Sawai’s classification system for tooth abrasion.Each examiner marked their responses in separate sheets which were blinded to each other.The kappa statistics were performed for inter-rater agreement among the three examiners.The level of agreement was evaluated according to the six-level nomenclature given by Landis and Koch.ICC and 95%CI between two examiners,i.e.,the inter-rater agreement among 1^(st) examiner(MS) and 2^(nd) examiner(FA) was 0.89.The inter-rater agreement among 1^(st) examiner(MS) and 3^(rd) examiner(SC) was 0.89.And the inter-rater agreement among 2^(nd) examiner(FA) and 3^(rd) examiner(SC) was 0.83.All the three comparisons show an almost perfect agreement between them.CONCLUSIONThere is an almost perfect agreement between multiple observers for classifying dental cervical abrasions using Sawai’s classification.Hence,this classification is reliable.

Abrasion Resistance of Cement Paste with Granulated Blast Furnace Slag and Its Relations to Microhardness and Microstructure

The abrasion resistance of cement pastes with 30 wt%,40 wt%and 50 wt%granulated blast furnace slag(GBFS),and its relations to microhardness and microstructure like hydration products and pore structure were studied.Results indicated that GBFS decreased the abrasion resistance of paste,and among the pastes with GBFS,the paste with 40 wt%GBFS showed the highest abrasion resistance.The microhardness of GBFS was lower than that of the cement,and the microhardness of the hydration products in paste with GBFS was also lower than that of the hydration products in paste without GBFS,so that the abrasion resistance of paste decreased when GBFS was incorporated.The reason for the decrease of microhardness of pastes with GBFS was that the contents of Ca(OH)_(2)in pastes with GBFS was significantly lower than that in the paste without GBFS,while large amounts of calcium aluminate hydrates and hydrotalcite-like phases(HT)in pastes with GBFS were generated.Furthermore,among the pastes with GBFS,the paste with 40 wt%GBFS showed the lowest porosity which was the main reason for its highest abrasion resistance.