A new algorithm of retrieving a petroleum substances absorption coefficient in sea water based on a remote sensing image

Establishing the remote sensing algorithm of retrieving the absorption coefficient of seawater petroleum substances is an efficient way to improve the accuracy of retrieving a seawater petroleum concentration using a remote sensing technology. A remote sensing reflectance is a basic physical parameter in water color remote sensing. Apply it to directly retrieve the absorption coefficient of seawater petroleum substances is of potential advantage. The absorption coefficient of waters containing petroleum [ACWCP, a_o（λ）], consists of the absorption coefficient of pure water [ACPW, a_w（λ）], plankton [ACP, a_（ph）（λ）], colored scraps [ACCS, a_（d,g）（λ）], and petroleum substance [ACPS, a_（oil）（λ）]. Among those, ACCS consists of the absorption coefficient of nonalgal particle [ACNP, a_d（λ）] and colored dissolved organic matter [ACCDOM, a_g（λ）]. For waters containing petroleum, the retrieved ACCS using the existing method is a combination absorption coefficient of ACNP,ACCDOM and ACPA [CAC, a_（d,g,oil）（λ）]. Therefore, the principle question is how to extract ACPS from CAC.Through the analysis of the three proportion tests conducted between the year of 2013 and 2015 and the corresponding remote sensing data, an algorithm of retrieving the absorption coefficient of petroleum substances is proposed based on remote sensing reflectance. First of all, ACPS and CAC are retrieved from the reflectance using the quasi-analytical algorithm（QAA）, with some parameter modified. Secondly, given the fact that the backscatter coefficient [BC, b_（bp）（555）] of total particles at 555 nm can be obtained completely from the reflectance, the relation between BC and ACNP in petroleum contaminated water can be established. As a result, ACNP can be calculated. Then, combining the remote sensing retrieving algorithm of a_g（440）, the method of achieving the spectral slope of the absorption coefficient can be established, from which ACCDOM,can be calculated. Finally, ACPS can be computed as the residual. The accuracy of ACPS based on this algorithm is 86% compared with the in situ measurements.

The proportions and variations of the light absorption coefficients of major ocean color components in the East China Sea

The East China Sea （ECS）, one of the largest continental seas, has dynamic hydrology and complex optical characteristics that make ocean color remote-sensing retrieval difficult. The distributions and proportions of the light absorption coefficients of major ocean color components based on two large-scale investigations in the ECS are presented, showing these features in typical summer and winter seasons. The absorption coefficient aCDOM, aNAp and aphy of colored dissolved organic matter, non-algal particle, and pigment of phytoplankton show a decreasing trend from the coast to the outer shelf. According to the aeDOM distribution at 440 nm, the Changjiang River plume shows an abnormal southeastward transport. An extremely high aNaP value patch at 440 nm is present in the middle coast. The chlorophyll-a-specific phytoplankton pigment absorption （a^hy） is much higher in winter than in summer, which may cause serious underestimated results when applying the averaged aphy into remote-sensing algorithms for chlorophyll concentration retrieval. The importance of phytoplankton size was evident in outer shelf waters. The absorption of aCDOM （440） is a dominant component accounting for over half of the total seawater absorption in summer. The aNAP（440） accounts for 64% of the absorption of the ECS coastal area in winter.

A preliminary study of the variation of phytoplankton absorption coefficients in the northern South China Sea

The temporal and spatial variabilities of phytoplankton absorption coefficients （a ph （λ）） and their relationships with physical processes in the northern South China Sea were examined, based on in situ data collected from two cruise surveys during May 14 to 25, 2001 and November 2 to 21, 2002. Significant changes in the surface water in a ph values and B/R ratios （a ph （440）/a ph （675）） were observed in May, which were caused by a phytoplankton bloom on the inner shelf stimulated by a large river plume due to heavy precipitation. This is consistent with the observed one order of magnitude elevation of chlorophyll a and a shift from a pico/nano dominated phytoplankton community to one dominated by micro-algae. Enhanced vertical mixing due to strengthened northeast monsoon in November has been observed to result in higher surface a ph （675） （0.002–0.006 m-1 higher） and less pronounced subsurface maximum on the outer shelf/slope in November as compared with that in May. Measurements of a ph and B/R ratios from three transects in November revealed a highest surface a ph （675） immediately outside the mouth of the Zhujiang （Pearl） River Estuary, whereas lower a ph （675） and higher B/R ratios were featured in the outer shelf/slope waters, demonstrating the respective influence of the Zhujiang River plume and the oligotrophic water of the South China Sea. The difference in spectral shapes of phytoplankton absorption （measured by B/R ratios and bathochromic shifts） on these three transects infers that picoprocaryotes are the major component of the phytoplankton community on the outer shelf/slope rather than on the inner shelf. A regional tuning of the phytoplankton absorption spectral model （Carder et al., 1999） was attempted, demonstrating a greater spatial variation than temporal variation in the lead parameter a 0 （λ）. It was thus implicated that region-based parameterization of ocean color remote sensing algorithms in the northern South China Sea was mandatory.

Multi-wavelength measurements of aerosol optical absorption coefficients using a photoacoustic spectrometer

The atmospheric aerosol absorption capacity is a critical parameter determining its direct and indirect effects on cli- mate. Accurate measurement is highly desired for the study of the radiative budget of the Earth. A multi-wavelength （405 rim, 532 nm, 780 nm） aerosol absorption meter based on photoacoustic spectroscopy （PAS） invovling a single cylin- drical acoustic resonator is developed for measuring the aerosol optical absorption coefficients （OACs）. A sensitivity of 1.3 Mm-l （at 532 nm） is demonstrated. The aerosol absorption meter is successfully tested through measuring the OACs of atmospheric nigrosin and ambient aerosols in the suburbs of Hefei city. The absorption cross section and absorption Angstrom exponent （AAE） for ambient aerosol are determined for characterizing the component of the ambient aerosol.

Back Surface Recombination Velocity Dependent of Absorption Coefficient as Applied to Determine Base Optimum Thickness of an n+/p/p+ Silicon Solar Cell

The monochromatic absorption coefficient of silicon, inducing the light penetration depth into the base of the solar cell, is used to determine the optimum thickness necessary for the production of a large photocurrent. The absorption-generation-diffusion and recombination (bulk and surface) phenomena are taken into account in the excess minority carrier continuity equation. The solution of this equation gives the photocurrent according to absorption and electronic parameters. Then from the obtained short circuit photocurrent expression, excess minority carrier back surface recombination velocity is determined, function of the monochromatic absorption coefficient at a given wavelength. This latter plotted versus base thickness yields the optimum thickness of an n+-p-p+ solar cell, for each wavelength, which is in the range close to the energy band gap of the silicon material. This study provides a tool for improvement solar cell manufacture processes, through the mathematical relationship obtained from the thickness limit according to the absorption coefficient that allows base width optimization.

Band structure and absorption coefficient in GaN/AlGaN quantum wires

The band structures of rectangular GaN/AlGaN quantum wires are modeled by using a parabolic effective-mass theory. The absorption coefficients are calculated in a contact-density matrix approach based on the band structure. The results obtained indicate that the peak absorption coefficients augment with the increase of the injected carrier density, and the optical gain caused by interband transition is polarization anisotropic. For the photon energy near 1.55 eV, we can obtain relatively large peak gain. The calculations support the previous results published in the recent literature.

The effect of an optical pump on the absorption coefficient of magnesium-doped near-stoichiometric lithium niobate in terahertz range

The absorption coefficient of magnesium-doped near-stoichiometric lithium niobate crystal is measured by terahertz time-domain spectroscopy in a frequency range of 0.2 THz^0.9 THz at room temperature. The absorption coefficient is modulated by external optical pump fields. Experimental results show that the absorption coefficient of near-SLN：Mg crystal is approximately in a range of 22 cm- 1_35 cm- 1 in a frequency range of 0.2 THz-0.9 THz and tunable up to nearly 15%. Further theoretical analysis reveals that the variation of absorption coefficient is related to the number of light-induced carriers, domain reversal process, and OH- absorption in this crystal.

Nonlinear Refractive Index and Absorption Coefficient of Single-Shell Semiconductor Carbon Nanotube

The nonlinear refractive index and absorption coefficient of single\|shell semiconductor carbon nanotubes(CN s ) are calculated based on the two\|band approximation and Genkin\|Mednis approach. The results of nonlinear refractive index and absorption coefficient reach the order of 10 -8 and 10 -4 cm 2\5W -1 separately, which indicates that CN s have wonderful nonlinear optical properties. Taking into account the temperature effect and overlapping of σ and π orbits, the effect of relaxation term and chiral angle is discussed. The results show that the smaller the relaxation term, the larger the nonlinear absorption coefficient and refractive index. At the same time, CN s with different chiral angles have different results due to their different energy gap.

Origin of anomalous enhancement of the absorption coefficient in a PN junction

The absorption coefficient is usually considered as a constant for certain materials at the given wavelength.However,recent experiments demonstrated that the absorption coefficient could be enhanced a lot by the PN junction.The absorption coefficient varies with the thickness of the intrinsic layer in a PIN structure.Here,we interpret the anomalous absorption coefficient from the competition between recombination and drift for non-equilibrium carriers.Based on the Fokker-Planck theory,a non-equilibrium statistical model that describes the relationship between absorption coefficient and material thickness has been proposed.It could predict the experimental data well.Our results can give new ideas to design photoelectric devices.

Improving the Cellular Characteristics of Aluminum Foam for Maximum Sound Absorption Coefficient Using Genetic Algorithm

Fabricating of metal foams with desired morphological parameters including pore size,porosity and pore opening is possible now using sintering technology.Thus,if it is possible to determine the morphology of metal foam to absorb sound at a given frequency,and then fabricate it through sintering,it is expected to have optimized metal foams for the best sound absorption.Theoretical sound absorption models such as Lu model describe the relationship between morphological parameters and the sound absorption coefficient.In this study,the Lu model was used to optimize the morphological parameters of aluminum metal foam for the best sound absorption coefficient.For this purpose,the Lu model was numerically solved using written codes in MATLAB software.After validating the proposed codes with benchmark data,the genetic algorithm(GA)was applied to optimize the affecting morphological parameters on the sound absorption coefficient.The optimization was carried out for the thicknesses of 5 mm to 40 mm at the sound frequency range of 250 Hz–8000 Hz.The optimized parameters ranged from 50%to 95%for porosity,0.1 mm to 4.5 mm for pore size,and 0.07 mm to 0.6 mm for pore opening size.The result of this study was applied to fabricate the desired aluminum metal foams for the best sound absorption.The novel approach applied in this study,is expected to be successfully applied in for best sound absorption in desired frequencies.

High Temperature Effect on Absorption Coefficient of M-MPPs and Sandwich Structures Coupled with MPPs

This paper addresses the effect of high temperature on absorption performance of sandwich material coupled with microperforated panels (MPPs) in multiple configurations using a finite element model (FEM) over a frequency range from 10 to 3000 Hz. The structure is backed with a rigid wall which can either be Aluminium or Al-Alloy used in aeronautic or automobile. The wave propagation in porous media is addressed using Johnson Champoux Allard model (JCA). The FEM model developed using COMSOL Multiphysics software makes it possible to predict the acoustic absorption coefficient in multilayer microperforated panels (M-MPPs) and sandwich structure. It is shown that, when structures made by MPPs or sandwich materials are submitted to high temperature, the absorption performance of the structure is strongly modified in terms of amplitude and width of the bandgap. For application in sever environment (noise reduction in engines aircrafts), Temperature is one of the parameters that will most influence the absorption performance of the structure. However, for application in the temperature domain smaller than 50?C (automotive applications for example), the effect of temperature is not significant on absorption performance of the structure.

Temperature-Dependent Thermal Conductivity and Absorption Coefficient Identification of Quartz Window up to 1100 K

The temperature-dependent absorption coefficient and thermal conductivity of a quartz window are obtained through experimental tests at a wide range of temperatures.A Fourier transform infrared spectrometer with a heated cavity is used for performing the transmittance measurements.The spectral absorption coefficient of the quartz window is inverted by the transmittance information at different temperatures using a genetic algorithm.Then,a quartz window-graphite plate-quartz window multilayer structure is designed,and the transient response of the structure subjected to high-temperature heating is recorded by a self-designed setup.Cooperating with the above absorption coefficient,a non-gray radiative-conductive heat transfer model is built for the multilayer structure,and the intrinsic thermal conductivity of the quartz window is identified.Finally,the effects of the temperature-dependent absorption coefficient and spectral selective features of the medium on the heat transfer characteristics are discussed.The results show that the absorption coefficient gradually increases with temperature.The intrinsic thermal conductivity of the quartz window varies from 1.35 to 2.52 W/(m·K)as the temperature rises,while the effective thermal conductivity is higher than the intrinsic thermal conductivity due to thermal radiation,specifically 26.4%higher at 1100 K.In addition,it is found that the influence of the temperature-dependent absorption coefficient on temperature of unheated side shows a trend of first increasing and then decreasing.When the absorption coefficient varies greatly with wavelength,a non-gray radiative-conductive heat transfer model should be built for the semitransparent materials.

Statistical absorption coefficient of microperforated absorbers

Special attention is paid to the characteristics of microperforated panel absorbers (MPA) in a sa-called random or diffuse sound field. Preliminary analysis based on the theory of “normal model” are given. Measurements for different kinds of MPA in the reveberation chamber have been carried out and useful results have been obtained. For the theoretical predictions, PC-software has been developed. The further stuides in the near future are proposed.

The method eliminating nearfield effect for measurement sound absorption coefficient

The numerical simulation is used in this work to study the nearfield radiation pressure of a piston projector, the smooth effect on the pressure field by using a 'big' receiver and the influence of the nearfield and in the transition region on measurement of sound absorption coefficient. The result indicates that the big error would appear when using usual absorption coefficient measurement method. According to the reason causing the error, the method eliminating nearfield effect (MENE) is proposed and some digital results are given for a / λ= 3, 9 and b = 0, 0.5a, a (a and b are the transducer and receiver radii respectively). The calculation results show that the method not only widens measurement range in nearfield, but also gives accurate results.

Frequency-domain photoacoustic technique formeasuring absolute optical absorption coefficient using three-chamber cell

Frequency-domain photoacoustic (PA) technique for immediate measuring absolute optical absorption coefficient is presented. It is based on determination of the ratio of the two spectrum amplitudes of the differential PA signal. The sample is placed into the lateral chamber of a three chamber PA cell. The difference of pressure variations (differential PA signal) excited in two other chambers as a result of laser pulse absorption by the sample is recorded. Presented PA technique was tested experimentally by measuring water absorption coefficient at an IR wavelength.

MEASUREMENTS OF THE ABSORPTION COEFFICIENT OF ATMOSPHERIC AEROSOLS

This paper discusses the measurement of the absorption coefficient of atmospheric aerosols and its meas- uring system based on the principle of integrating plate. Measurements in Beijing show that the absorption coefficient of atmospheric aerosols in the heating period varies in a range of 10to 10mand in the non-heating period, its values are near 10m.

Development of a High Sound Absorption Material CEMCOM

Based on sound absorption mechanism of material,the special sound absorption material CEMCOM for road sound insulation is introduced.This high sound absorption material is mainly composed of expanded perlite.Using multiple sound absorption structure can improve sound absorption property of material.According to the preparation principle and durability design of material,a new kind of material with low cost and high durability is developed.

Variability of phytoplankton absorption in the northern South China Sea:influence of the size structure and pigment composition of algal populations

Data from three cruises conducted in the Zhujiang River （ZR）, coastal waters of Guangdong （CWGD） and the northern South China Sea （NSCS） during 2003 and 2004 were examined for assessing the relative importance of pigment composition and packaging effect in modifying the specific absorption coefficients of phytoplankton. The three survey regions differ widely in their phytoplankton community with large cells dominating the ZR and CWGD waters and small cells dominating the NSCS region. Variations in the size structure and the accessory pigments have much effect on the chlorophyll a-specific absorption coefficient of phytoplankton. The size index accounted for about 42% and 33% of the variation of the specific absorption coefficient at 440 and 675 nm, respectively. Using the multiple regression analysis approach, pigment concentrations for each sample were calculated. The accessory pigments other than chlorophyll a contribute to absorption mainly in the blue - to - green region of the spectrum and their absorptions account for about 44%, 43% and 53% on the average of the total phytoplankton absorption at 440 nm for the ZR, CWGD and NSCS regions. Among the accessory pigments, the photosynthetic carotenoids （noted PSC） play a dominant role in the ZR and CWGD waters, while in the NSCS the nonphotosynthetic carotenoids （noted PPG） as well as PSC have important contributions. Because the variations of both the size structure and accessory pigments in algal populations contributed to the variability of the specific absorption coefficient in the study regions, these factors may be considered explicitly in future bio - optical algorithms to derive chlorophyll a concentration more accurately.

Intersubband absorption with difference-frequency generation in GaAs asymmetric quantum wells

An asymmetric quantum well （AQW） is designed to emit terahertz （THz） waves by using difference frequency generation （DFG） with the structure of GaAs/Al0.2Ga0.8As/Al0.5Ga0.sAs. The characteristics of absorption coefficients are analysed under the parabolic and non-parabolic energy-band conditions in detail. We find that the absorption coefficients vary with the two pump optical intensities, and they reach the maxima when the pump wavelengths are given as λp1 = 9.70 μm and λp2 = 10.64 μm, respectively. Compared with non-parabolic conditions, the total absorption coefficient under parabolic conditions shows a blue shift, which is due to the increase in the energy difference between the ground and excited states. By adjusting the two pump optical intensities, the wave vector phase-matching condition inside the AQW is satisfied.

Enhanced absorption process in the thin active region of GaAs based p-i-n structure

The optical absorption is the most important macroscopic process to characterize the microscopic optical transition in the semiconductor materials. Recently, great enhancement has been observed in the absorption of the active region within a p–n junction. In this paper, Ga As based p–i–n samples with the active region varied from 100 nm to 3 μm were fabricated and it was observed that the external quantum efficiencies are higher than the typical results, indicating a new mechanism beyond the established theories. We proposed a theoretical model about the abnormal optical absorption process in the active region within a strong electric field, which might provide new theories for the design of the solar cells,photodetectors, and other photoelectric devices.