Effect of Si δ-Doping on the Linear and Nonlinear Optical Absorptions and Refractive Index Changes in InAlN/GaN Single Quantum Wells

In the framework of effective mass approximation, we theoretically investigate the electronic structure of the Si δ-doped InAIN/GaN single quantum well by solving numerically the coupled equations Schrodinger-Poisson self-consistently. The linear, nonlinear optical absorption coefficients and relative refractive index changes are calculated as functions of the doping concentration and its thickness. The obtained results show that the position and the amplitude of the linear and total optical absorption coefficients and the refractive index changes can be modified by varying the doping concentration and its thickness. In addition, it is found that the maximum of the optical absorption can be red-shifted or blue-shifted by varying the doping concentration. The obtained results are important for the design of various electronic components such as high-power FETs and infrared photonic devices.

A correction method for the telluric absorptions and application to Lijiang Observatory

Observing a telluric standard star for correcting the telluric absorption lines of spectrum will take a significant amount of precious telescope time,especially in the long-term spectral monitoring project.Beyond that,it is difficult to select a suitable telluric standard star near in both time and airmass to the scientific object.In this paper,we present a method of correcting the telluric absorption lines by combining the advantages of long slit spectroscopy.By rotating the slit,we observed the scientific object and a nearby comparison star in one exposure,so that the spectra of both objects should have the same telluric transmission spectrum.The telluric transmission spectrum was constructed by dividing the observed spectrum of the comparison star by its stellar template,and was used to correct the telluric absorption lines of the scientific object.Using the long slit spectrograph of the Lijiang 2.4-meter telescope,we designed a long-term spectroscopic observation strategy,and finished a four-year spectroscopic monitoring for a pair of objects(an active galactic nucleus and a non-varying comparison star).We applied this method to correct the telluric absorption lines of the long-term monitored spectra by the Lijiang 2.4-meter telescope,and investigated the variation of the telluric absorptions at Lijiang Observatory.We found that the telluric absorption transparency is mainly modulated by the seasonal variability of the relative humidity,airmass and seeing.Using the scatter of the [O Ⅲ] λ5007 fluxes emitted from the narrow-line region of active galactic nuclei as an indicator,we found that the correction accuracy of the telluric absorption lines is 1%.

GLOBAL BLOW-UP FOR A HEAT SYSTEM WITH LOCALIZED SOURCES AND ABSORPTIONS

In this paper there are established the global existence and finite time blow-up results of nonnegative solution for the following parabolic system ut = △u ＋ v^P（x0, t） - au^τ, x ∈ Ω, t 〉 0, △u ＋ v^P（x0, t） - bu^τ, x ∈ Ω, t 〉 0 subject to homogeneous Dirichlet conditions and nonnegative initial data, where x0 ∈ Ω is a fixed point, p, q, r, s ≥ 1 and a, b 〉 0 are constants. In the situation when nonnegative solution （u, v） of the above problem blows up in finite time, it is showed that the blow-up is global and this differs from the local sources case. Moreover, for the special case r = s = 1, lim t→T＊（T＊-t）^p＋1/pq-1u（x,t）=（p＋1）^1/pq-1（q＋1）^p/pq-1（pq-1）^-p＋1/pq-1, lim t→T＊（T＊-t）^q＋1/pq-1u（x,t）=（p＋1）^1/pq-1（q＋1）^p/pq-1（pq-1）^-p＋1/pq-1 are obtained uniformly on compact subsets of/2, where T＊ is the blow-up time.

Terahertz field-induced modulations of intersubband absorptions in quantum wells

Nonlinear optical properties of intersubband electrons in a 3-level quantum well under intense terahertz field are investigated by using a density matrix approach. The results show that the terahertz fields with different frequencies cause the distinct modulations of the intersubband absorptions. The terahertz-indueed sideband and Autler-Towns splitting in the absorption spectrum are obtained, respectively for the terahertz-photon energy below and close to the transition energy between the ground and first excited state.

The theory and experiment of solute migration caused by excited state absorptions

Nonsymmetrical transition from reverse-saturable absorption （RSA） to saturable absorption （SA） caused by excited state absorption induced mass transport of the CuPcTs dissolved in dimethyl sulfoxide is observed in an open aperture Z-scan experiment with a 21-ps laser pulse. The nonsymmetrical transition from RSA to SA is ascribed neither to saturation of excited state absorption nor to thermal induced mass transport, the so-called Sorer effect. In our consideration, strong nonlinear absorption causes the rapid accumulation of the non-uniform kinetic energy of the solute molecules. The non-uniform kinetic field in turn causes the migration of the solute molecules. Additionally, an energy-gradient-induced mass transport theory is presented to interpret the experimental results, and the theoretical calculations are also taken to fit our experimental results.

Multi-componential metal intercalated graphite hybrids synthesized by co-intercalation polymerization towards highefficient microwave absorptions

Magnetic expanded graphite(EG)hybrids were synthesized by co-intercalation polymerization of aniline together with transition metal ions.Experimental results show that metal ions(Fe,Co,Ni,Cu)and even their mixtures can co-intercalate into graphite interlayers with flexibly controllable ratios and contents.Among these co-intercalation compounds,Fe/Ni-intercalated graphite with a predesigned mole ratio of 1:3 transforms into NiFe_(2)O_(4)/FeNi_(3)@EG during the annealing process.The synthesized magnetic EG hybrids present multiband microwave absorption in C and X bands due to improved impedance match as well as significantly enhanced interfacial polarization relaxation induced by multi-componential metals.The reflection values of−39.1 dB at 6.95 GHz and−25.7 dB at 9.4 GHz are achieved with an ultra-low loading of 5 wt.%.This work provides a flexible approach for tuning the components and structures of magnetic EG hybrids,which may contribute to the development of microwave absorption materials with superior performances.

Effects of gravel on the water absorption characteristics and hydraulic parameters of stony soil

The eastern foothills of the Helan Mountains in China are a typical mountainous region of soil and gravel,where gravel could affect the water movement process in the soil.This study focused on the effects of different gravel contents on the water absorption characteristics and hydraulic parameters of stony soil.The stony soil samples were collected from the eastern foothills of the Helan Mountains in April 2023 and used as the experimental materials to conduct a one-dimensional horizontal soil column absorption experiment.Six experimental groups with gravel contents of 0%,10%,20%,30%,40%,and 50%were established to determine the saturated hydraulic conductivity(K_(s)),saturated water content(θ_(s)),initial water content(θ_(i)),and retention water content(θ_(r)),and explore the changes in the wetting front depth and cumulative absorption volume during the absorption experiment.The Philip model was used to fit the soil absorption process and determine the soil water absorption rate.Then the length of the characteristic wetting front depth,shape coefficient,empirical parameter,inverse intake suction and soil water suction were derived from the van Genuchten model.Finally,the hydraulic parameters mentioned above were used to fit the soil water characteristic curves,unsaturated hydraulic conductivity(K_(θ))and specific water capacity(C(h)).The results showed that the wetting front depth and cumulative absorption volume of each treatment gradually decreased with increasing gravel content.Compared with control check treatment with gravel content of 0%,soil water absorption rates in the treatments with gravel contents of 10%,20%,30%,40%,and 50%decreased by 11.47%,17.97%,25.24%,29.83%,and 42.45%,respectively.As the gravel content increased,inverse intake suction gradually increased,and shape coefficient,K_(s),θ_(s),andθ_(r)gradually decreased.For the same soil water content,soil water suction and K_(θ)gradually decreased with increasing gravel content.At the same soil water suction,C(h)decreased with increasing gravel content,and the water use efficiency worsened.Overall,the water holding capacity,hydraulic conductivity,and water use efficiency of stony soil in the eastern foothills of the Helan Mountains decreased with increasing gravel content.This study could provide data support for improving soil water use efficiency in the eastern foothills of the Helan Mountains and other similar rocky mountainous areas.

Cascade equilibrium stage relaxation method by introducing equilibrium efficiency parameter

Optimizing multistage processes,such as distillation or absorption,is a complex mixed-integer nonlinear programming(MINLP)problem.Relaxing integer into continuous variables and solving the easier nonlinear programming(NLP)problem is an optimization idea for the multistage process.In this article,we propose a relaxation method based on the efficiency parameter.When the efficiency parameter is 1or 0,the proposed model is equivalent to the complete existence or inexistence of the equilibrium stage.And non-integer efficiency represents partial existence.A multi-component absorption case shows a natural penalty for non-integer efficiency,which can assist the efficiency parameter converging to 0 or 1.However,its penalty is weaker than the existing relaxation models,such as the bypass efficiency model.In a simple distillation case,we show that this property can weaken the nonconvexity of the optimization problem and increase the probability of obtaining better optimization results.

Simultaneous removal of sulfur dioxide and nitrogen oxide from flue gas by phosphorus sludge:The performance and absorption mechanism

Developing low-cost and green simultaneous desulfurization and denitrification technologies is of great significance for sulfur dioxide(SO_(2))and nitrogen oxide(NO_(x))emission control at low temperatures,especially for small and medium-sized coal-fired boilers and furnaces.Herein,phosphorus sludge,an industrial waste from the production process of yellow phosphorus,has been developed to simultaneously eliminate SO_(2)and NO_(x)from coal-fired flue gas.The key factors affecting the experimental results indicate that desulfurization and denitrification efficiency of over 95%can be achieved at a low temperature of 55℃.Further,the absorption mechanism was investigated by characterizing the solid and liquid phases of the phosphorus sludge during the absorption process.The efficient removal of SO_(2)is attributed to the abundance of iron(Fe^(3+))and manganese(Mn^(2+))in the absorbent.SO_(2)can be rapidly catalyzed and converted to SO_(4)^(2-)by them.The key to NOx removal is the oxidation of NO toward watersoluble high-valent nitrogen oxides by oxidizing reactive substances induced via yellow phosphorus,which are then absorbed by water and converted to NO_(3)^(-).Meanwhile,yellow phosphorus is oxidized to phosphoric acid(H_(3)PO_(4)).The spent absorption slurry can be reused through wet process phosphoric acid production,as it contains sulfuric acid(H_(2)SO_(4)),nitric acid(HNO_(3)),and H_(3)PO_(4).Accordingly,this is a technology with broad application prospects.

A shield of defense:Developing ballistic composite panels with effective electromagnetic interference shielding absorption

The primary goal of this study is to develop cost-effective shield materials that offer effective protection against high-velocity ballistic impact and electromagnetic interference(EMI)shielding capabilities through absorption.Six fiber-reinforced epoxy composite panels,each with a different fabric material and stacking sequence,have been fabricated using a hand-layup vacuum bagging process.Two panels made of Kevlar and glass fibers,referred to as(K-NIJ)and(G-NIJ),have been tested according to the National Institute of Justice ballistic resistance protective materials test NIJ 0108.01 Standard-Level IIIA(9 mm×19 mm FMJ 124 g)test.Three panels,namely,a hybrid of Kevlar and glass(H-S),glass with ceramic particles(C-S),and glass with recycled rubber(R-S)have been impacted by the bullet at the center,while the fourth panel made of glass fiber(G-S)has been impacted at the side.EMI shielding properties have been measured in the X-band frequency range via the reflection-transmission method.Results indicate that four panels(K-NIJ,G-NIJ,H-S,and G-S)are capable of withstanding high-velocity impact by stopping the bullet from penetrating through the panels while maintaining their structural integrity.However,under such conditions,these panels may experience localized delamination with variable severity.The EMI measurements reveal that the highest absorptivity observed is 88% for the KNIJ panel at 10.8 GHz,while all panels maintain an average absorptivity above 65%.All panels act as a lossy medium with a peak absorptivity at different frequencies,with K-NIJ and H-S panels demonstrating the highest absorptivity.In summary,the study results in the development of a novel,costeffective,multifunctional glass fiber epoxy composite that combines ballistic and electromagnetic interference shielding properties.The material has been developed using a simple manufacturing method and exhibits remarkable ballistic protection that outperforms Kevlar in terms of shielding efficiency;no bullet penetration or back face signature is observed,and it also demonstrates high EMI shielding absorption.Overall,the materials developed show great promise for various applications,including the military and defense.

MXene Hollow Spheres Supported by a C–Co Exoskeleton Grow MWCNTs for Efficient Microwave Absorption

High-performance microwave absorption(MA) materials must be studied immediately since electromagnetic pollution has become a problem that cannot be disregarded. A straightforward composite material, comprising hollow MXene spheres loaded with C–Co frameworks, was prepared to develop multiwalled carbon nanotubes(MWCNTs). A high impedance and suitable morphology were guaranteed by the C–Co exoskeleton, the attenuation ability was provided by the MWCNTs endoskeleton, and the material performance was greatly enhanced by the layered core–shell structure. When the thickness was only 2.04 mm, the effective absorption bandwidth was 5.67 GHz, and the minimum reflection loss(RLmin) was-70.70 d B. At a thickness of 1.861 mm, the sample calcined at 700 ℃ had a RLmin of-63.25 d B. All samples performed well with a reduced filler ratio of 15 wt%. This paper provides a method for making lightweight core–shell composite MA materials with magnetoelectric synergy.

Effects of alcohol on digestion,absorption and metabolism of sea cucumber saponins in healthy mice

Sea cucumber saponins have attracted more attention in recent years due to biological activities.It is a popular practice to soak sea cucumber in Baijiu at home and being applied to industrial manufacturing in China.However,knowledge of the effect of alcohol on the absorption and metabolism of sea cucumber saponins is limited.The effects of alcohol on digestion,absorption and metabolism of sea cucumber saponins in BALB/c mice were investigated after gavage and tail intravenous injection.The results showed that the content of saponins in serum and liver was significantly higher under the influence of alcohol than that in the control group after oral administration.Alcohol promoted the absorption of sea cucumber saponins prototype as well as inhibited the process of saponins being transformed into deglycositic metabolites in the small intestine.Moreover,sea cucumber saponins remained in circulation for a long time and alcohol slowed down the clearance of sea cucumber saponins under the influence of alcohol after intravenous injection.This confirmed the feasibility of marinating sea cucumber in Baijiu to improve the efficacy of saponins and provides an important theoretical basis for the utilization of sea cucumber and the development of sea cucumber liquor.

Chemical Scissors Tailored Nano‑Tellurium with High‑Entropy Morphology for Efficient Foam‑Hydrogel‑Based Solar Photothermal Evaporators

The development of tellurium(Te)-based semiconductor nanomaterials for efficient light-to-heat conversion may offer an effective means of harvesting sunlight to address global energy concerns.However,the nanosized Te(nano-Te)materials reported to date suffer from a series of drawbacks,including limited light absorption and a lack of surface structures.Herein,we report the preparation of nano-Te by electrochemical exfoliation using an electrolyzable room-temperature ionic liquid.Anions,cations,and their corresponding electrolytic products acting as chemical scissors can precisely intercalate and functionalize bulk Te.The resulting nano-Te has high morphological entropy,rich surface functional groups,and broad light absorption.We also constructed foam hydrogels based on poly(vinyl alcohol)/nano-Te,which achieved an evaporation rate and energy efficiency of 4.11 kg m^(−2)h^(−1)and 128%,respectively,under 1 sun irradiation.Furthermore,the evaporation rate was maintained in the range 2.5-3.0 kg m^(−2)h^(−1)outdoors under 0.5-1.0 sun,providing highly efficient evaporation under low light conditions.

Reinforcing effects of polypropylene on energy absorption and fracturing of cement-based tailings backfill under impact loading

Polypropylene(PP)fiber-reinforced cement-based tailings backfill(FRCTB)is a green compound material with superior crack resistance and has good prospects for application in underground mining.However,FRCTB exhibits susceptibility to dynamic events,such as impact ground pressure and blast vibrations.This paper investigates the energy and crack distribution behavior of FRCTB under dynamic impact,considering the height/diameter(H/D)effect.Split Hopkinson pressure bar,industrial computed tomography scan,and scanning electron microscopy(SEM)experiments were carried out on six types of FRCTB.Laboratory outcomes confirmed fiber aggregation at the bottom of specimens.When H/D was less than 0.8,the proportion of PP fibers distributed along theθangle direction of80°-90°increased.For the total energy,all samples presented similar energy absorption,reflectance,and transmittance.However,a rise in H/D may cause a rise in the energy absorption rate of FRCTB during the peak phase.A positive correlation existed between the average strain rate and absorbed energy per unit volume.The increase in H/D resulted in a decreased crack volume fraction of FRCTB.When the H/D was greater than or equal to 0.7,the maximum crack volume fraction of FRCTB was observed close to the incidence plane.Radial cracks were present only in the FRCTB with an H/D ratio of 0.5.Samples with H/D ratios of 0.5 and 0.6 showed similar distributions of weakly and heavily damaged areas.PP fibers can limit the emergence and expansion of cracks by influencing their path.SEM observations revealed considerable differences in the bonding strengths between fibers and the FRCTB.Fibers that adhered particularly well to the substrate were attracted together with the hydration products adhering to surfaces.These results show that FRCTB is promising as a sustainable and green backfill for determining the design properties of mining with backfill.

Remote sensing of air pollution incorporating integrated-path differential-absorption and coherent-Doppler lidar

An innovative complex lidar system deployed on an airborne rotorcraft platform for remote sensing of atmospheric pollution is proposed and demonstrated.The system incorporates integrated-path differential absorption lidar(DIAL) and coherent-doppler lidar(CDL) techniques using a dual tunable TEA CO_(2)laser in the 9—11 μm band and a 1.55 μm fiber laser.By combining the principles of differential absorption detection and pulsed coherent detection,the system enables agile and remote sensing of atmospheric pollution.Extensive static tests validate the system’s real-time detection capabilities,including the measurement of concentration-path-length product(CL),front distance,and path wind speed of air pollution plumes over long distances exceeding 4 km.Flight experiments is conducted with the helicopter.Scanning of the pollutant concentration and the wind field is carried out in an approximately 1 km slant range over scanning angle ranges from 45°to 65°,with a radial resolution of 30 m and10 s.The test results demonstrate the system’s ability to spatially map atmospheric pollution plumes and predict their motion and dispersion patterns,thereby ensuring the protection of public safety.

Pressure-Driven Energy Band Gap Narrowing of λ-N_(2)

Probing the energy band gap of solid nitrogen at high pressures is of importance for understanding pressuredriven changes in electronic structures and insulator-to-metal transitions under high pressure.The λ-N_(2) formed by cold compression is known to be the most stable one in all solid nitrogen phases observed so far.By optimizing the optical system,we successfully measured the high-pressure absorption spectra of λ-N_(2) covering the polymericnitrogen synthetic pressures(124 GPa-165 GPa).The measured optical band gap decreases with increasing pressure,from 2.23 eV at 124 GPa to 1.55 eV at 165 GPa,with a negative pressure coefficient of-18.4 meV/GPa,which is consistent with the result from our ab initio total-energy calculations(-22.6 meV/GPa).The extrapolative metallization pressure for theλ-N_(2) is around 288(18)GPa,which is close to the metallization pressure(280 GPa)for the η-N_(2) expected by previous absorption edge and direct electrical measurements.Our results provide a direct spectroscopic evidence for the pressure-driven band gap narrowing of solid nitrogen.

Putrescine Modulates Cadmium Fixation Ability of Cell Wall to Decrease Cadmium Accumulation in Rice,a Process Might Depend on Nitric Oxide

Although putrescine(PUT)has been linked to plants'responses to cadmium(Cd)stress,the exact mechanism is still elusive.In the current investigation,the endogenous PUT concentration in rice roots was enhanced by Cd stress.Exogenous PUT increased root cell wall hemicellulose levels,which in turn increased its Cd binding capacity,concurrently decreasing the transcription level of genes such as OsNRAMP1 and OsCd1 that are responsible for root Cd absorption.As a result。

Sandwich structures with tapered tubes as core:A quasi-static investigation

In this article,the experimental and finite element analysis is utilized to investigate the quasi-static compression features of sandwich constructions built with tapered tubes.3D printing technology was utilized to create the hollow centers of the tapering tubes,with and without corrugations.The results demonstrate that the energy absorption(EA)and specific energy absorption(SEA)of the single corrugated tapered tube sandwich are 51.6% and 19.8% higher,respectively,than those of the conical tube sandwich.Furthermore,the results demonstrate that energy absorbers can benefit from corrugation in order to increase their efficiency.Additionally,the tapered corrugated tubes'resistance to oblique impacts was studied.Compared to a straight tube,the tapered tube is more resistant to oblique loads and has a lower initial peak crushing force(PCF),according to numerical simulations.After conducting a parametric study,it was discovered that the energy absorption performance of the sandwich construction is significantly affected by the amplitude,number of corrugations,and wall thickness.EA and SEA of DTS with corrugation number of 8 increased by 17.4%and 29.6%,respectively,while PCF decreased by 9.2% compared to DTS with corrugation number of 10.

Nitrogen‑Doped Magnetic‑Dielectric‑Carbon Aerogel for High‑Efficiency Electromagnetic Wave Absorption

Carbonbased aerogels derived from biomass chitosan are encountering a flourishing moment in electromagnetic protection on account of lightweight,controllable fabrication and versatility.Nevertheless,developing a facile construction method of component design with carbon-based aerogels for high-efficiency electromagnetic wave absorption(EWA)materials with a broad effective absorption bandwidth(EAB)and strong absorption yet hits some snags.Herein,the nitrogen-doped magnetic-dielectric-carbon aerogel was obtained via ice template method followed by carbonization treatment,homogeneous and abundant nickel(Ni)and manganese oxide(MnO)particles in situ grew on the carbon aerogels.Thanks to the optimization of impedance matching of dielectric/magnetic components to carbon aerogels,the nitrogen-doped magnetic-dielectric-carbon aerogel(Ni/MnO-CA)suggests a praiseworthy EWA performance,with an ultra-wide EAB of 7.36 GHz and a minimum reflection loss(RLmin)of−64.09 dB,while achieving a specific reflection loss of−253.32 dB mm−1.Furthermore,the aerogel reveals excellent radar stealth,infrared stealth,and thermal management capabilities.Hence,the high-performance,easy fabricated and multifunctional nickel/manganese oxide/carbon aerogels have broad application aspects for electromagnetic protection,electronic devices and aerospace.

Preparation and Properties of Magnesium Oxysulfide Cement Based Foam Board Absorbing Material

In order to better solve the problem of electromagnetic pollution in the civil building cement,to improve the absorption capacity of magnesium oxysulfide cement based materials,and to better use sulfur oxide magnesium cement foamed sheet for improvement of electromagnetic industry,this paper uses the excellent microwave absorbing properties of ferrite and the modified sulfur oxide magnesium cement foam board,and discusses the microwave absorbing performance,aiming at improving the electromagnetic pollution in daily life.The effects of ferrite and silicon carbide doping on microwave absorption properties of modified magnesium oxysulfate cement were studied.At the same time,the wave absorbing properties of the corresponding samples were detected by bow method,and the causes of the corresponding phenomena were analyzed by scanning electron microscopy (SEM).The results show that the lowest reflectance of the material is-17.9 dB at 34.1 GHz and the average reflectance of the whole band is-15.9 dB under the target frequency band of 26.5-40 GHz.Under the action of external magnetic field,the absorbing particles are affected by magnetization force,magnetic dipole and resistance coupling,and play the absorbing effect in the cement base solidified completely in the electromagnetic field environment.The lowest reflectance is-17.3dB at 36.4GHz and the average reflectance is-14.3dB for the whole band.