We investigated the role of metal atomization and solvent decomposition into reductive species and carbon clusters in the phase formation of transition-metal carbides(TMCs;namely,Co_(3)C,Fe_(3)C,TiC,and MoC)by pulsed ...We investigated the role of metal atomization and solvent decomposition into reductive species and carbon clusters in the phase formation of transition-metal carbides(TMCs;namely,Co_(3)C,Fe_(3)C,TiC,and MoC)by pulsed laser ablation of Co,Fe,Ti,and Mo metals in acetone.The interaction between carbon s-p-orbitals and metal d-orbitals causes a redistribution of valence structure through charge transfer,leading to the formation of surface defects as observed by X-ray photoelectron spectroscopy.These defects influence the evolved TMCs,making them effective for hydrogen and oxygen evolution reactions(HER and OER)in an alkaline medium.Co_(3)C with more oxygen affinity promoted CoO(OH)intermediates,and the electrochemical surface oxidation to Co_(3)O_(4)was captured via in situ/operando electrochemical Raman probes,increasing the number of active sites for OER activity.MoC with more d-vacancies exhibits strong hydrogen binding,promoting HER kinetics,whereas Fe_(3)C and TiC with more defect states to trap charge carriers may hinder both OER and HER activities.The results show that the assembled membrane-less electrolyzer with Co_(3)C∥Co_(3)C and MoC∥MoC electrodes requires~2.01 and 1.99 V,respectively,to deliver a 10 mA cm−2 with excellent electrochemical and structural stability.In addition,the ascertained pulsed laser synthesis mechanism and unit-cell packing relations will open up sustainable pathways for obtaining highly stable electrocatalysts for electrolyzers.展开更多
A GC method with headspace injection for determination of residual organic solvents acetone andn-hexane in andrographolide microcapsules was established. A CP-624 column was used with FID detection. The calibrationcur...A GC method with headspace injection for determination of residual organic solvents acetone andn-hexane in andrographolide microcapsules was established. A CP-624 column was used with FID detection. The calibrationcurves of acetone and n-hexane were linear in the ranges of 100～900mg (r=0.9999) and 5.8～52.2mg(r=0.9963),respectively. The average recoveries were 101.2% (RSD=1.78%) and 100.9% (RSD=2.51%), respectively. Thedetection limits were 64 and 18ng, respectively.展开更多
The pendent drop or standing bubble method is applied to measure the interfacial tensions between water and nonpolar fluids (n-hexane, n-heptane, nitrogen, oxygen and methane)up to 473K and 220MPa. The high pressure a...The pendent drop or standing bubble method is applied to measure the interfacial tensions between water and nonpolar fluids (n-hexane, n-heptane, nitrogen, oxygen and methane)up to 473K and 220MPa. The high pressure autoclave with t wo visual windows and the auxiliary equipment are described. The sizes(ca 2mm) and shapes of drops or bubbles are recorded with microscope and video camera. The use of digital image permits fast, precise determination of the contour parameters. The densit y values of the liquids or gases have been chosen from literature.A special program is proposed to calculate the interfacial tensions automatically from drop shape at given temperature and pressure. The interfacial tensions σ12 increase with pr essure for the twoliquid-liquid systems,but decrease with pressure for the three gas-liquid systems.展开更多
基金National Research Foundation of Korea,Grant/Award Numbers:2019H1D3A1A01071209,2021R1I1A1A01060380,2022R1A2C2010686,2022R1A4A3033528Korea Basic Science Institute,Grant/Award Numbers:2019R1A6C1010042,2021R1A6C103A427。
文摘We investigated the role of metal atomization and solvent decomposition into reductive species and carbon clusters in the phase formation of transition-metal carbides(TMCs;namely,Co_(3)C,Fe_(3)C,TiC,and MoC)by pulsed laser ablation of Co,Fe,Ti,and Mo metals in acetone.The interaction between carbon s-p-orbitals and metal d-orbitals causes a redistribution of valence structure through charge transfer,leading to the formation of surface defects as observed by X-ray photoelectron spectroscopy.These defects influence the evolved TMCs,making them effective for hydrogen and oxygen evolution reactions(HER and OER)in an alkaline medium.Co_(3)C with more oxygen affinity promoted CoO(OH)intermediates,and the electrochemical surface oxidation to Co_(3)O_(4)was captured via in situ/operando electrochemical Raman probes,increasing the number of active sites for OER activity.MoC with more d-vacancies exhibits strong hydrogen binding,promoting HER kinetics,whereas Fe_(3)C and TiC with more defect states to trap charge carriers may hinder both OER and HER activities.The results show that the assembled membrane-less electrolyzer with Co_(3)C∥Co_(3)C and MoC∥MoC electrodes requires~2.01 and 1.99 V,respectively,to deliver a 10 mA cm−2 with excellent electrochemical and structural stability.In addition,the ascertained pulsed laser synthesis mechanism and unit-cell packing relations will open up sustainable pathways for obtaining highly stable electrocatalysts for electrolyzers.
文摘A GC method with headspace injection for determination of residual organic solvents acetone andn-hexane in andrographolide microcapsules was established. A CP-624 column was used with FID detection. The calibrationcurves of acetone and n-hexane were linear in the ranges of 100～900mg (r=0.9999) and 5.8～52.2mg(r=0.9963),respectively. The average recoveries were 101.2% (RSD=1.78%) and 100.9% (RSD=2.51%), respectively. Thedetection limits were 64 and 18ng, respectively.
文摘The pendent drop or standing bubble method is applied to measure the interfacial tensions between water and nonpolar fluids (n-hexane, n-heptane, nitrogen, oxygen and methane)up to 473K and 220MPa. The high pressure autoclave with t wo visual windows and the auxiliary equipment are described. The sizes(ca 2mm) and shapes of drops or bubbles are recorded with microscope and video camera. The use of digital image permits fast, precise determination of the contour parameters. The densit y values of the liquids or gases have been chosen from literature.A special program is proposed to calculate the interfacial tensions automatically from drop shape at given temperature and pressure. The interfacial tensions σ12 increase with pr essure for the twoliquid-liquid systems,but decrease with pressure for the three gas-liquid systems.
