The acid cleaning method of labware for trace element analysis in snow and ice samples

Acid cleaning processes were performed on a class 100 laminar flow clean bench assembled inside a class 1000 clean room.The ultrapure water was produced by Millipore RO (Reverse Osmosis) and Milli-Q water purification systems.The three purity grades of nitric acid used for cleaning include Merck reagent grade HNO3,Fisher 'TraceMetal' grade HNO3,and the purest Fisher 'Optima' grade HNO3.The various bottles,containers and other labware,which are in contact with the samples,are made of low-density polyethylene (LDPE) and FEP or PFA Teflon materials.The acid cleaning procedures of the bottles and other containers follow a successive four times cleaning through immersion in increasing purity of nitric acid baths at different concentrations during four weeks.The first acid bath is performed at room temperature,but the following three acid baths are heated on ceramic hotplates with a surface temperature of 45℃.In order to verify the efficiency of the acid cleaning method,cleaned bottles underwent a blank determination procedure using ELAN 6100 inductively coupled plasma spectrometry (ICP-MS).Results show that most measured trace elements are not detected and the elements detected are at very low concentrations.The blank values are comparable with that of bottles cleaned at Korea Polar Research Institute (KOPRI).Although the acid cleaning method is developed mainly for reliable measurements of trace elements in snow and ice samples,it can also be used for investigations of trace elements in other environmental samples.

Chlorine poisoning caused by improper mixing of household disinfectants during the COVID-19 pandemic:Case series

BACKGROUND Misuse of disinfectants during the coronavirus disease 2019 pandemic has led to several poisoning incidents.However,there are few clinical case reports on poisoning caused by improper mixing of household disinfectants.AIM To summarize the clinical characteristics and treatment effects of chlorine poisoning caused by improper mixing of hypochlorite bleach with acidic cleaning agents.METHODS We retrospectively analyzed baseline and clinical data,clinical symptoms,and treatment methods of seven patients with chlorine poisoning who were admitted to the National Army Poisoning Treatment Center.RESULTS Among the seven patients,the average poisoning time(exposure to admission)was 57 h(4-240 h).All patients were involved in cleaning bathrooms.Chest computed tomography scans revealed bilateral lung effusions or inflammatory changes in five patients.The partial pressure of oxygen decreased in six patients,and respiratory failure occurred in one.Five patients had different degrees of increase in white blood cell count.Humidified oxygen therapy,non-invasive mechanical ventilation,anti-inflammatory corticosteroids,antioxidants,and antibiotics were administered for treatment.The average length of hospital stay was 7 d(4-9 d).All seven patients recovered and were discharged.CONCLUSION Improper mixing of household disinfectants may cause damage to the respiratory system due to chlorine poisoning.Corticosteroids may improve lung exudation in severe cases,and symptomatic supportive treatment should be performed early.

Towards a better hydraulic cleaning strategy for ultrafiltration membrane fouling by humic acid: Effect of backwash water composition

As a routine measurement to alleviate membrane fouling, hydraulic cleaning is of great significance for the steady operation of ultrafiltration（UF） systems in water treatment processes. In this work, a comparative study was performed to investigate the effects of the composition of backwash water on the hydraulic cleaning performance of UF membranes fouled by humic acid（HA）. Various types of backwash water, including UF permeate, Milli-Q water, Na Cl solution, CaCl_2 solution and HA solution, were compared in terms of hydraulically irreversible fouling index, total surface tension and residual HA. The results indicated that Milli-Q water backwash was superior to UF permeate backwash in cleaning HA-fouled membranes, and the backwash water containing Na＋or HA outperformed Milli-Q water in alleviating HA fouling. On the contrary, the presence of Ca^（2＋） in backwash water significantly decreased the backwash efficiency. Moreover, Ca^（2＋） played an important role in foulant removal, and the residual HA content closely related to the residual Ca^（2＋） content.Mechanism analysis suggested that the backwash process may involve fouling layer swelling, ion exchange, electric double layer release and competitive complexation. Ion exchange and competitive complexation played significant roles in the efficient hydraulic cleaning associated with Na＋and HA, respectively.

Hot-dip Galvanizing of Carbon Steel after Cold Rolling with Oxide Scale and Hydrogen Descaling

A new processing method for producing hot dip galvanized steel is designed and tested, in which pickling is skipped. Hot-rolled low carbon steel sheets are roiled with oxide scale in an experimental mill at room temperature, prior to annealing under a 20% hydrogen reducing atmosphere and galvanizing on a hot-dip galvanizing simulator. Micro-cracks formed in the oxide scale during cold rolling roughen the steel surface and enlarge the specific surface. Through-thickness cracks provide transport channels for hydrogen, and hence the reduction of oxide scale is en- hanced. When the sheet is dipped in the zinc bath, cracks are submerged by liquated zinc and the defects are not dis- tinct after hot-dip galvanizing. The overlay coating occludes with rough surface of the sheet, whereby a superior coat- ing adherence is realized.