Within previous EU projects, possible modifications to the engine components have been investigated, that would allow for an optimised aerodynamic or acoustic design of the EGV （exit guide vanes） of the TEC （turbin...Within previous EU projects, possible modifications to the engine components have been investigated, that would allow for an optimised aerodynamic or acoustic design of the EGV （exit guide vanes） of the TEC （turbine exit casing）. However, the engine weight should not be increased and the aerodynamic performance must be at least the same. This paper compares the sound power level of a state-of-the-art TEC （reference TEC） with typical EGVs with an aerodynamically optimised TEC configuration for the engine operating point approach. It is shown that a significant weight reduction （only bladings considered） and reduction in engine length can be achieved but the sound power level for the fundamental tone （lst blade passing frequency） for this acoustically important operating point is increased. It is also shown that the losses of the aerodynamical optimised EGVs are higher for this off design point but significantly lower at the aero design point. Measurements were conducted in the STTF （subsonic test turbine facility） at the Institute for Thermal Turbo machinery and Machine Dynamics, Graz University of Technology. The inlet guide vanes, the LPT （low pressure turbine） stage, and the EGVs have been designed by MTU Aero Engines.展开更多
A mathematical model of deterndulng sound power by using the scanning method is developed. It is assumed that the scanning speed is constant and the noise source is stationary The accuracy of estimating sound power al...A mathematical model of deterndulng sound power by using the scanning method is developed. It is assumed that the scanning speed is constant and the noise source is stationary The accuracy of estimating sound power along some simple paths on the surfaces such as rectangle, disc and hemisphere is analyzed. It is argued that the accuracy of estimating sound power is strongly depended on a suitable selection of scan path. The accurate estdriation of sound power can be made by scanning along some simple paths.展开更多
A numerical and experimental study was presented on active control of structurally radiated sound from an elastic cylindrical shell.An analytical model was developed for the active structural acoustic control (ASAC) o...A numerical and experimental study was presented on active control of structurally radiated sound from an elastic cylindrical shell.An analytical model was developed for the active structural acoustic control (ASAC) of the cylindrical shell.Both global and local control strategies were considered.The optimal control forces corresponding to each control strategy were obtained by using the linear quadratic optimal control theory.Numerical simulations were performed to examine and analyze the control performance under different control strategies.The results show that global sound attenuation of the cylindrical shell at resonance frequencies can be achieved by using point force as the control input of the ASAC system.Better control performance can be obtained under the control strategy of minimization of the radiated sound power.However,control spillover may occur at off-resonance frequencies with the control strategy of structural kinetic energy minimization in terms of the radiated sound power.Considerable levels of global sound attenuation can also be achieved in the on-resonance cases with the local control strategy,i.e.,minimization of the mean-square velocity of finite discrete locations.An ASAC experiment using an FXLMS algorithm was implemented,agreement was observed between the numerical and experimental results,and successful attenuation of structural vibration and radiated sound was achieved.展开更多
Due to the high speed of underwater vehicles, cavitation is generated inevitably along with the sound attenuation when the sound signal traverses through the cavity region around the underwater vehicle. The linear wav...Due to the high speed of underwater vehicles, cavitation is generated inevitably along with the sound attenuation when the sound signal traverses through the cavity region around the underwater vehicle. The linear wave propagation is studied to obtain the influence of bubbly liquid on the acoustic wave propagation in the cavity region. The sound attenuation coefficient and the sound speed formula of the bubbly liquid are presented. Based on the sound attenuation coefficients with various vapor volume fractions, the attenuation of sound intensity is calculated under large cavitation number conditions. The result shows that the sound intensity attenuation is fairly small in a certain condition. Consequently, the intensity attenuation can be neglected in engineering.展开更多
Time reversal mirror （TRM） can use the physical characteristics of the underwater acoustic （UWA） channel to focus on the desired user in multi-user UWA communication. The active average sound intensity （AASI） de...Time reversal mirror （TRM） can use the physical characteristics of the underwater acoustic （UWA） channel to focus on the desired user in multi-user UWA communication. The active average sound intensity （AASI） detector can estimate all azimuths of users with the same frequency band at the same time in order to achieve directional communication by vector combination. Space-division multiple access （SDMA） based on TRM combined with the AASI detector is proposed in this paper, which can make the capacity of the code division multiple access （CDMA） UWA system significantly increase. The simulation and lake test results show that the 7-user UWA multi-user system can achieve low bit error communication.展开更多
为解决HID灯的老化及灯的伏安特性变化引起的功率漂移问题,基于Buck降压变换器的平均电流控制模式,设计并制作了一款具有恒功率控制能力的数字控制电子镇流器驱动电路,包含两个控制环路:内电流环路用于维持稳定驱动,外功率环路用于维持...为解决HID灯的老化及灯的伏安特性变化引起的功率漂移问题,基于Buck降压变换器的平均电流控制模式,设计并制作了一款具有恒功率控制能力的数字控制电子镇流器驱动电路,包含两个控制环路:内电流环路用于维持稳定驱动,外功率环路用于维持灯在其使用期间的功率恒定,并根据Buck降压变换器DCM模式下的小信号模型,以PI算法作为数字补偿器,完成补偿环路设计,保证电路输出稳定性。为抑制声共振,该电路结构采用三级式结构的电子镇流器,以低频方波驱动。设计和测试结果表明,该电子镇流器驱动电路可实现450 W的恒功率控制,误差值小于3%。该电子镇流器驱动电路结构简单,可靠性高,可适用于450 W HID灯驱动。展开更多
文摘Within previous EU projects, possible modifications to the engine components have been investigated, that would allow for an optimised aerodynamic or acoustic design of the EGV （exit guide vanes） of the TEC （turbine exit casing）. However, the engine weight should not be increased and the aerodynamic performance must be at least the same. This paper compares the sound power level of a state-of-the-art TEC （reference TEC） with typical EGVs with an aerodynamically optimised TEC configuration for the engine operating point approach. It is shown that a significant weight reduction （only bladings considered） and reduction in engine length can be achieved but the sound power level for the fundamental tone （lst blade passing frequency） for this acoustically important operating point is increased. It is also shown that the losses of the aerodynamical optimised EGVs are higher for this off design point but significantly lower at the aero design point. Measurements were conducted in the STTF （subsonic test turbine facility） at the Institute for Thermal Turbo machinery and Machine Dynamics, Graz University of Technology. The inlet guide vanes, the LPT （low pressure turbine） stage, and the EGVs have been designed by MTU Aero Engines.
文摘A mathematical model of deterndulng sound power by using the scanning method is developed. It is assumed that the scanning speed is constant and the noise source is stationary The accuracy of estimating sound power along some simple paths on the surfaces such as rectangle, disc and hemisphere is analyzed. It is argued that the accuracy of estimating sound power is strongly depended on a suitable selection of scan path. The accurate estdriation of sound power can be made by scanning along some simple paths.
基金Supported by the National Natural Science Foundation of China (No.10802024)Research Fund for the Doctoral Program of Higher Education of China (No. 200802171009)+2 种基金the Natural Science Foundation of Heilongjiang Province (No.E200944)Innovative Talents Fund of Harbin (No.2009RFQXG211)Fundamental Research Fund of HEU (No. HEUFT08003)
文摘A numerical and experimental study was presented on active control of structurally radiated sound from an elastic cylindrical shell.An analytical model was developed for the active structural acoustic control (ASAC) of the cylindrical shell.Both global and local control strategies were considered.The optimal control forces corresponding to each control strategy were obtained by using the linear quadratic optimal control theory.Numerical simulations were performed to examine and analyze the control performance under different control strategies.The results show that global sound attenuation of the cylindrical shell at resonance frequencies can be achieved by using point force as the control input of the ASAC system.Better control performance can be obtained under the control strategy of minimization of the radiated sound power.However,control spillover may occur at off-resonance frequencies with the control strategy of structural kinetic energy minimization in terms of the radiated sound power.Considerable levels of global sound attenuation can also be achieved in the on-resonance cases with the local control strategy,i.e.,minimization of the mean-square velocity of finite discrete locations.An ASAC experiment using an FXLMS algorithm was implemented,agreement was observed between the numerical and experimental results,and successful attenuation of structural vibration and radiated sound was achieved.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51279165 and 51479170)the National Defense Basic Scientific Research Program of China(Grant No.B2720133014)
文摘Due to the high speed of underwater vehicles, cavitation is generated inevitably along with the sound attenuation when the sound signal traverses through the cavity region around the underwater vehicle. The linear wave propagation is studied to obtain the influence of bubbly liquid on the acoustic wave propagation in the cavity region. The sound attenuation coefficient and the sound speed formula of the bubbly liquid are presented. Based on the sound attenuation coefficients with various vapor volume fractions, the attenuation of sound intensity is calculated under large cavitation number conditions. The result shows that the sound intensity attenuation is fairly small in a certain condition. Consequently, the intensity attenuation can be neglected in engineering.
基金supported by the National Natural Science Foundation of China(6147113751179034)+3 种基金the Ships Pre-research Support Technology Fund(13J3.1.5)the Natural Science Foundation of Heilongjiang Province(F201109)the Innovation Talents of Science and the Technology Research Projects of Harbin(2013RFQXJ101)the National Defense Basic Technology Research(JSJC2013604C012)
文摘Time reversal mirror （TRM） can use the physical characteristics of the underwater acoustic （UWA） channel to focus on the desired user in multi-user UWA communication. The active average sound intensity （AASI） detector can estimate all azimuths of users with the same frequency band at the same time in order to achieve directional communication by vector combination. Space-division multiple access （SDMA） based on TRM combined with the AASI detector is proposed in this paper, which can make the capacity of the code division multiple access （CDMA） UWA system significantly increase. The simulation and lake test results show that the 7-user UWA multi-user system can achieve low bit error communication.
文摘为解决HID灯的老化及灯的伏安特性变化引起的功率漂移问题,基于Buck降压变换器的平均电流控制模式,设计并制作了一款具有恒功率控制能力的数字控制电子镇流器驱动电路,包含两个控制环路:内电流环路用于维持稳定驱动,外功率环路用于维持灯在其使用期间的功率恒定,并根据Buck降压变换器DCM模式下的小信号模型,以PI算法作为数字补偿器,完成补偿环路设计,保证电路输出稳定性。为抑制声共振,该电路结构采用三级式结构的电子镇流器,以低频方波驱动。设计和测试结果表明,该电子镇流器驱动电路可实现450 W的恒功率控制,误差值小于3%。该电子镇流器驱动电路结构简单,可靠性高,可适用于450 W HID灯驱动。
