Determination of neutron capture cross sections of ^(232)That 14.1 MeV and 14.8 MeV using the neutron activation method

The ^(232)Th(n,γ)^(233)Th neutron capture reaction cross sections were measured at average neutron energies of 14.1 MeV and 14.8 MeV using the activation method.The neutron flux was determined using the monitor reaction^(27)Al(n,α)^(24)Na.The induced gamma-ray activities were measured using a low background gamma ray spectrometer equipped with a high resolution HPGe detector.The experimentally determined cross sections were compared with the data in the literature,and the evaluated data of ENDF/B-Ⅶ.1,JENDL-4.0u+,and CENDL-3.1.The excitation functions of the ^(232)Th(n,γ)^(233)Th reaction were also calculated theoretically using the TALYS1.6 computer code.

Assessment of Patentability of Inventions Relating to "Rules and Methods for Mental Activities"

Examination of whether an invention is a patentable subject matter or not is one of the main parts of the patent examination. In the recently revised Guidelines for Examination a relatively major change has been made of the benchmark for the examination of inventions relating to "rules and methods for mental activities", for example, limiting the scope of application of Article 25.1 (2) of the Patent Law. As a result, the hitherto non-patentable subject matters are still excluded from patentability. That...

Comparative Study of the Geomagnetic Activity Effect on foF2 Variation as Defined by the Two Classification Methods at Dakar Station over Solar Cycle Phases

This paper aims to establish a comparison between both geomagnetic activity classification methods on foF2 diurnal variation over solar cycle phases. It concerns first a comparison of geomagnetic activity occurrences according to both classification methods;and second the geomagnetic effect on foF2 diurnal variation profiles as defined for the equatorial latitudes. The occurrences of the different disturbed geomagnetic activities (recurrent activity (RA), shock activity (SA) and fluctuant activity (FA)) according to both classifications (ancient classification (AC) and new classification (NC)) have been studied at Dakar ionosonde station (Lat: 14.8°N;Long: 342.6°E). Regarding both classifications, the RA occurs more during the decreasing phase. And it’s observed that the RA occurs the most during the increasing phase for the AC and during the minimum phase for the NC. The maximum gap of occurrence () between both classifications is -11.1% (for the negative value which is observed during the increasing phase) and +16.74% (for the positive one which is observed during the decreasing phase). The occurrence of the SA in relation with both classifications is the lowest during the minimum phase and the maximum occurrence is observed during the maximum and decreasing phases, for the AC, with a value close to 37% and for the NC at the maximum phase with a percentage of 54.47%. The maximum gap of occurrence () between both classifications is -17.85% (for the negative value which is observed at maximum phase) and +13.53% (for the positive one which is observed during the decreasing phase). For both classifications, the FA occurs the least during the minimum phase and the most during the maximum phase for the AC and at maximum and decreasing phases with percentage values of occurrence of roughly 37% for the NC. The maximum gap of occurrence () between both classifications is -10% (for the negative value which is observed during the decreasing phase) and +20.11% (for the positive one which is observed during the maximum phase). foF2 diurnal profiles throughout solar cycle phases concerning the AC and the NC have been compared. The FA diurnal profiles don’t present a difference. The RA and the SA present a difference during minimum and increasing phases and the least at maximum and decreasing phases.

Overview of Industrial Materials Detection Based on Prompt Gamma Neutron Activation Analysis Technology

Prompt gamma neutron activation analysis (PGNAA) is a non-destructive online measurement nuclear analysis method. With its unique advantages, it has been widely used in online analysis of industrial materials such as coal, cement, and minerals in recent years. However, there are many kinds of literature on PGNAA in the field of industrial materials detection, and there are still a few concluding articles. To this end, based on the principle of PGNAA online analysis, the status quo and development of the real-time online detection of industrial material components in the field are reviewed and discussed by consulting a large number of domestic and foreign PGNAA related literature and data, to facilitate the reference of relevant scientific researchers.

The K Method for Estimating Earthquake Activity Parameters and Effect of the Boundary Uncertainty of the Source Region:Discussion on the Seismic Zoning Method

Two aspects of a new method,which can be used for seismic zoning,are introduced in this paper.On the one hand,the approach to estimate b value and annual activity rate proposed by Kijko and Sellevoll needs to use the earthquake catalogue.The existing earthquake catalogue contains both historical and recent instrumental data sets and it is inadequate to use only one part.Combining the large number of historical events with recent complete records and taking the magnitude uncertainty into account,Kijko’s method gives the maximum likelihood estimation of b value and annual activity rate,which might be more realistic.On the other hand,this method considers the source zone boundary uncertainty in seismic hazard analysis,which means the earthquake activity rate across a boundary of a source zone changes smoothly instead of abruptly and avoids too large a gradient in the calculated results.

Low-temperature Denitration Mechanism of NH_(3)-SCR over Fe/AC Catalyst

To study the modification mechanism of activated carbon(AC)by Fe and the low-temperature NH_(3)-selective catalytic reduction(SCR)denitration mechanism of Fe/AC catalysts,Fe/AC catalysts were prepared using coconut shell AC activated by nitric acid as the support and iron oxide as the active component.The crystal structure,surface morphology,pore structure,functional groups and valence states of the active components of Fe/AC catalysts were characterised by X-ray diffraction,scanning electron microscopy,nitrogen adsorption and desorption,Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy,respectively.The effect of Fe loading and calcination temperature on the low-temperature denitration of NH_(3)-SCR over Fe/AC catalysts was studied using NH_(3)as the reducing gas at low temperature(150℃).The results show that the iron oxide on the Fe/AC catalyst is spherical and uniformly dispersed on the surface of AC,thereby improving the crystallisation performance and increasing the number of active sites and specific surface area on AC in contact with the reaction gas.Hence,a rapid NH_(3)-SCR reaction was realised.When the roasting temperature remains constant,the iron oxide crystals formed by increasing the amount of loading can enter the AC pore structure and accumulate to form more micropores.When the roasting temperature is raised from 400 to 500℃,the iron oxide is mainly transformed fromα-Fe_(2)O_(3)toγ-Fe_(2)O_(3),which improves the iron oxide dispersion and increases its denitration active site,allowing gas adsorption.When the Fe loading amount is 10%,and the roasting temperature is 500℃,the NO removal rate of the Fe/AC catalyst can reach 95%.According to the study,the low-temperature NH_(3)-SCR mechanism of Fe/AC catalyst is proposed,in which the redox reaction between Fe~(2+)and Fe~(3+)will facilitate the formation of reactive oxygen vacancies,which increases the amount of oxygen adsorption on the surface,especially the increase in surface acid sites,and promotes and adsorbs more reaction gases(NH_(3),O_(2),NO).The transformation from the standard SCR reaction to the fast SCR reaction is accelerated.

Improved Active Islanding Detection Technique for Multi-Inverter Power System

Due to the increased penetration of multi-inverter distributed generation(DG)systems,different DG technologies,inverter control methods,and other inverter functions are challenging the capabilities of islanding detection.In addition,multi-inverter networks connecting the distribution system point of common coupling(PCC)create islanding at paralleling inverters,which adds the vulnerability of islanding detection.Furthermore,available islanding detection must overcome more challenges from non-detection zones(NDZs)under reduced power mismatches.Therefore,in this study,a new method called parameter self-adapting active islanding detection was utilized to minimize the dilution effect and reduce NDZs in multi-inverter power systems.The method utilizes an active frequency drift(AFD)method and applies a positive feedback gain of adoption parameters,which significantly minimizes NDZs at parallel inverters.The simulation and experimental outcomes indicate that the proposed method can effectively weaken the dilution effect in multi-inverter networks connecting the distribution system PCC.

A new look atφ-pH diagram(Ⅰ)——All-equilibriumφ-pH diagram for M-H_(2)O system

A new viewpoint of computer program poubaix diagram was proposed on traditional φ pH diagrams. All equilibrium principle and activity term method were used to plot φ pH diagrams for M H 2O systems based on the thermochemical database developed. And a new method——arithmetic geometric method is used to solve nonlinear equations group. The calculation procedure is proved to be efficient and convergent. The method seldom depends on artificial intervention and can extend to multi component all equilibrium φ pH diagrams such as M ligand H 2O system. [

Supplementing Qi and activating blood circulation method to treat vertebrobasilar dolichoectasia with posterior circulatory watershed infarction:a case report of two patients

Vertebrobasilar dolichoectasia(VBD),a rare posterior circulation vascular variant disease,is an important risk factor for many acute cerebrovascular diseases.An insufficient understanding of VBD often leads to misdiagnose.Two cases of VBD that were initially diagnosed as posterior circulation watershed infarction are reported here.Absence of common causes of stroke including hypoperfusion,blood system diseases,carotid and aortic dissection,and eosinophil elevation,the symptoms of the 2 patients met the diagnostic criteria of VBD.Both patients displayed symptoms that were in line with the Traditional Chinese Medicine(TCM)syndrome pattern of"Qi deficiency and blood stasis".Accordingly,they were comprehensively treated with Supplementing Qi and activating blood circulation method.The clinical manifestations of the 2 patients were remarkably improved and no recurrence of watershed infarction was found in a 1-year follow-up.A detailed medical history and laboratory examination are capable of improving diagnostic accuracy of VBD.TCM treatment based on syndrome identification might be a promising candidate for VBD management.

Iterative Methods of Richardson-Lucy-Type for Image Deblurring

Image deconvolution problems with a symmetric point-spread function arisein many areas of science and engineering. These problems often are solved by theRichardson-Lucy method, a nonlinear iterative method. We first show a convergenceresult for the Richardson-Lucy method. The proof sheds light on why the method mayconverge slowly. Subsequently, we describe an iterative active set method that imposesthe same constraints on the computed solution as the Richardson-Lucy method. Computed examples show the latter method to yield better restorations than the RichardsonLucy method and typically require less computational effort.

A Simplified Numerical Simulation Method Considering Active Devices for Opto-Electronic Mixed Modules

A simplified simulation method based on the FDTD technique that can handle active devices is proposed. This method well suits the electrical crosstalk analysis of multi-channel integrated, opto-electronic mixed modules. We apply this method to an 8-channel integrated super-compact high-sensitivity optical module. The results show good agreement between simulations and measurements.

Cumulative fission yield measurements with 14.7 MeV neutrons on ^(238)U

The fission yield data in the 14 MeV energy neutron induced fission of^(238)U play an important role in decay heat calculations and generation-Ⅳ reactor designs.In order to accurately measure fission product yields(FPYs)of^(238)U induced by 14 MeV neutrons,the cumulative yields of fission products ranging from^(92)Sr to^(147)Nd in the^(239)U(n,f) reaction with a 14.7 MeV neutron were determined using an off-line γ-ray spectrometric technique.The14.7 MeV quasi-monoenergetic neutron beam was provided by the K-400 D-T neutron generator at China Academy of Engineering Physics(CAEP).Fission products were measured by a low background high purity germanium gamma spectrometer.The neutron flux was obtained from the^(93)Nb(n.2n)^(92m)Nb reaction,and the mean neutron energy was calculated using the cross-section ratios for the^(90)Zr(n,2n)^(89)Zr and^(93)Nb(n,2n)^(92m)Nb reactions.With a series of corrections,high precision cumulative yields of 20 fission products were obtained.Our FPYs for the^(238)U(n,f) reaction at 14.7 MeV were compared with the existing experimental nuclear reaction data and evaluated nuclear data,respectively.The results will be helpful in the design of a generation-Ⅳ reactor and the construction of evaluated fission yield databases.

Branch-Activated Multi-Domain Convolutional Neural Network for Visual Tracking

Convolutional neural networks(CNNs) have been applied in state-of-the-art visual tracking tasks to represent the target. However, most existing algorithms treat visual tracking as an object-specific task. Therefore,the model needs to be retrained for different test video sequences. We propose a branch-activated multi-domain convolutional neural network(BAMDCNN). In contrast to most existing trackers based on CNNs which require frequent online training, BAMDCNN only needs offline training and online fine-tuning. Specifically, BAMDCNN exploits category-specific features that are more robust against variations. To allow for learning category-specific information, we introduce a group algorithm and a branch activation method. Experimental results on challenging benchmark show that the proposed algorithm outperforms other state-of-the-art methods. What's more, compared with CNN based trackers, BAMDCNN increases tracking speed.

Multiparticle^(nat)Sr(γ,xny p)reactions induced with bremsstrahlung end-point energies of 55,60,and 65 MeV

This study measured the yields of the radionuclides^(82)Sr,^(83(m+g))Sr,^(85m)Sr,^(85g)Sr,^(87m)Sr,^(81(g+0.976m))Rb,^(82m)Rb,^(83g)Rb,^(84(m+g))Rb,and^(86(m+g))Rb produced in^(nat)Sr(γ,xnyp)multiparticle reactions with bremsstrahlung end-point energies of 55,60,and 65 MeV.The bremsstrahlung radiation was generated using the 100-MeV electron linear accelerator at the Pohang Accelerator Laboratory,Korea,and the reaction yields were derived from the induced activitiesmeasured using off-lineγ-ray spectrometry.To obtain accurate experimental results,we performed the necessaryγ-ray interference corrections.The experimental results were compared with the theoretical predictions obtained using the TALYS-1.95 statistical nuclear model code.The calculations were performed using six different level-density models to ascertain which model best fitted the experimental results.The dependence of the reaction yield on the incident bremsstrahlung energy and on the number of nucleons emitted by the photonuclear reactions was also investigated.

Cross section measurements on zirconium isotopes for ~14 MeV neutrons and their theoretical calculations of excitation functions

The cross sections for the 94Zr(n,d*)93m+gY,96Zr(n,γ)97Z,96Zr(n,2n)95Zr,90Zr(n,α)87mSr,94Zr(n,α)91Sr,90Zr(n,p)90mY,92Zr(n,p)92Y,and 94Zr(n,p)94Y reactions have been measured in the neutron energy range of 13.5-14.8 MeV by means of the activation technique.The neutrons were produced via the D-T reaction.A high-purity germanium detector with high energy resolution was used to measure the inducedγactivities.In combination with the nuclear reaction theoretical models,the excitation curves of the above-mentioned eight nuclear reactions within the incident neutron energy range from the threshold to 20 MeV were obtained by adopting the nuclear theoretical model program system Talys-1.9.The resulting experimental cross sections were analyzed and compared with the experimental data from published studies.Calculations were performed using Talys-1.9 and are in agreement with our experimental results,previous experimental values,as well as results of the theoretical excitation curves at the corresponding energies.The theoretical excitation curves generally match the experimental data well.