Most existing legged robots are developed under laboratory environments and, corre- spondingly, have good performance of locomotion. The robots＇ ability of walking on rough terrain is of great importance but is seldo...Most existing legged robots are developed under laboratory environments and, corre- spondingly, have good performance of locomotion. The robots＇ ability of walking on rough terrain is of great importance but is seldom achieved. Being compliant to external unperceived impacts is cru- cial since it is unavoidable that the slip, modeling errors and imprecise information of terrain will make planned trajectories to be followed with errors and unpredictable contacts. The impedance control gives an inspiration to realize an active compliance which allows the legged robots to follow reference trajectories and overcome external disturbances. In this paper, a novel impedance force/ position control scheme is presented, which is based on Cartesian force measurement of leg＇ s end effector for our hydraulic quadruped robot The simulation verifies the efficiency of the impedance model, and the experimental results at the end demonstrate the feasibility of the proposed control scheme.展开更多
The end-effector of the large space manipulator is employed to assist the manipulator in handling and manipulating large payloads on orbit.Currently,there are few researches about the end-effector,and the existing end...The end-effector of the large space manipulator is employed to assist the manipulator in handling and manipulating large payloads on orbit.Currently,there are few researches about the end-effector,and the existing end-effectors have some disadvantages,such as poor misalignment tolerance capability and complex mechanical components.According to the end positioning errors and the residual vibration characters of the large space manipulators,two basic performance requirements of the end-effector which include the capabilities of misalignment tolerance and soft capture are proposed.And the end-effector should accommodate the following misalignments of the mechanical interface.The translation misalignments in axial and radial directions and the angular misalignments in roll,pitch and yaw are ±100 mm,100 mm,±10°,±15°,±15°,respectively.Seven end-effector schemes are presented and the capabilities of misalignment tolerance and soft capture are analyzed elementarily.The three fingers-three petals end-effector and the steel cable-snared end-effector are the most feasible schemes among the seven schemes,and they are designed in detail.The capabilities of misalignment tolerance and soft capture are validated and evaluated,through the experiment on the micro-gravity simulating device and the dynamic analysis in ADAMS software.The results show that the misalignment tolerance capabilities of these two schemes could satisfy the requirement.And the translation misalignment tolerances in axial and radial directions and the angular misalignment tolerances in roll,pitch and yaw of the steel cable-snared end-effector are 30mm,15mm,6°,3° and 3° larger than those of the three fingers-three petals end-effector,respectively.And the contact force of the steel cable-snared end-effector is smaller and smoother than that of the three fingers-three petals end-effector.The end-effector schemes and research methods are beneficial to the developments of the large space manipulator end-effctor and the space docking mechanism.展开更多
Herein,a control method based on the optimal energy efficiency of a hydraulic quadruped robot was proposed,which not only realizes the optimal energy efficiency of flying trot gait but also ensures the stability of hi...Herein,a control method based on the optimal energy efficiency of a hydraulic quadruped robot was proposed,which not only realizes the optimal energy efficiency of flying trot gait but also ensures the stability of high-speed movement.Concretely,the energy consumption per unit distance was adopted as the energy efficiency evaluation index based on the constant pressure oil supply characteristics of the hydraulic system,and the global optimization algorithm was adopted to solve the optimal parameters.Afterward,the gait parameters that affect the energy efficiency of quadruped were analyzed and the mapping relationship between each parameter and energy efficiency was captured,so as to select the optimum combination of energy efficiency parameters,which is significant to improve endurance capability.Furthermore,to ensure the stability of the high-speed flying trot gait motion of the hydraulic quadruped robot,the active compliance control strategy was employed.Lastly,the proposed method was successfully verified by simulations and experiments.The experimental results reveal that the flying trot gait of the hydraulic quadruped robot can be stably controlled at a speed of 2.2 m/s.展开更多
基金Supported by the National High Technology Research and Development Program of China(863Program)(2011AA041002)
文摘Most existing legged robots are developed under laboratory environments and, corre- spondingly, have good performance of locomotion. The robots＇ ability of walking on rough terrain is of great importance but is seldom achieved. Being compliant to external unperceived impacts is cru- cial since it is unavoidable that the slip, modeling errors and imprecise information of terrain will make planned trajectories to be followed with errors and unpredictable contacts. The impedance control gives an inspiration to realize an active compliance which allows the legged robots to follow reference trajectories and overcome external disturbances. In this paper, a novel impedance force/ position control scheme is presented, which is based on Cartesian force measurement of leg＇ s end effector for our hydraulic quadruped robot The simulation verifies the efficiency of the impedance model, and the experimental results at the end demonstrate the feasibility of the proposed control scheme.
基金supported by National Hi-tech Research and Development Program of China(863 Program,Grant No. 2006AA04Z228)
文摘The end-effector of the large space manipulator is employed to assist the manipulator in handling and manipulating large payloads on orbit.Currently,there are few researches about the end-effector,and the existing end-effectors have some disadvantages,such as poor misalignment tolerance capability and complex mechanical components.According to the end positioning errors and the residual vibration characters of the large space manipulators,two basic performance requirements of the end-effector which include the capabilities of misalignment tolerance and soft capture are proposed.And the end-effector should accommodate the following misalignments of the mechanical interface.The translation misalignments in axial and radial directions and the angular misalignments in roll,pitch and yaw are ±100 mm,100 mm,±10°,±15°,±15°,respectively.Seven end-effector schemes are presented and the capabilities of misalignment tolerance and soft capture are analyzed elementarily.The three fingers-three petals end-effector and the steel cable-snared end-effector are the most feasible schemes among the seven schemes,and they are designed in detail.The capabilities of misalignment tolerance and soft capture are validated and evaluated,through the experiment on the micro-gravity simulating device and the dynamic analysis in ADAMS software.The results show that the misalignment tolerance capabilities of these two schemes could satisfy the requirement.And the translation misalignment tolerances in axial and radial directions and the angular misalignment tolerances in roll,pitch and yaw of the steel cable-snared end-effector are 30mm,15mm,6°,3° and 3° larger than those of the three fingers-three petals end-effector,respectively.And the contact force of the steel cable-snared end-effector is smaller and smoother than that of the three fingers-three petals end-effector.The end-effector schemes and research methods are beneficial to the developments of the large space manipulator end-effctor and the space docking mechanism.
文摘Herein,a control method based on the optimal energy efficiency of a hydraulic quadruped robot was proposed,which not only realizes the optimal energy efficiency of flying trot gait but also ensures the stability of high-speed movement.Concretely,the energy consumption per unit distance was adopted as the energy efficiency evaluation index based on the constant pressure oil supply characteristics of the hydraulic system,and the global optimization algorithm was adopted to solve the optimal parameters.Afterward,the gait parameters that affect the energy efficiency of quadruped were analyzed and the mapping relationship between each parameter and energy efficiency was captured,so as to select the optimum combination of energy efficiency parameters,which is significant to improve endurance capability.Furthermore,to ensure the stability of the high-speed flying trot gait motion of the hydraulic quadruped robot,the active compliance control strategy was employed.Lastly,the proposed method was successfully verified by simulations and experiments.The experimental results reveal that the flying trot gait of the hydraulic quadruped robot can be stably controlled at a speed of 2.2 m/s.
