LINEAR ACTIVE STRUCTURES AND MODES (Ⅰ) —BASIC CONCEPTS AND PROPERTIES

Some basic concepts about the active structures were firstly explained, and the main subjects to study in the field of active structure dynamics were synthesized. For the linear active structures, the annotations on the modes were done in detail. The physical meanings of the right and left eigenvectors were explained. The right eigenvectors are the modal shapes and the modal responses of an active structure depend on the left ones. The adjoint structure of an active structure was defined and the reciprocity theorem was interpreted. For two active structures, which are adjoint to each other and with the reciprocal gain-matrices, the right and left eigenvector are reciprocal. The relationship between an active structure and the corresponding passive structure is expressed with the transfer functions, which is employed to resolve the estimation problems.

LINEAR ACTIVE STRUCTURES AND MODES (Ⅱ) —DISCRETE SYSTEMS AND BEAMS

The basic concepts about the active structures and some attributes of the modes were presented in paper “Liner Active Structures and Modes]( I) ". The characteristics of the active discrete systems and active beams were discussed, especially, the stability of the active structures and the orthogonality of the eigenvectors. The notes about modes were portrayed by a model of a seven-storeyed building with sensors and actuators. The concept of the adjoint active structure was extended from the discrete systems to the beams that were the representations of the continuous structures. Two types of beams with different placements of the measuring and actuating systems were discussed in detail. One is the beam with the discrete sensors and actuators, and the other is the beam with distributed sensor and actuator function. The orthogonality conditions were derived with the modal shapes of the active beam and its adjoint active beam. An example shows that the variation of eigenvalues with feedback amplitude for the homo-configuration and non-homo-configuration active structures.

Research progress on electronic and active site engineering of cobalt‐based electrocatalysts for oxygen evolution reaction

Electrocatalytic water splitting has been identified as a potential candidate for producing clean hydrogen energy with zero carbon emission.However,the sluggish kinetics of oxygen evolution reaction on the anode side of the watersplitting device significantly hinders its practical applications.Generally,the efficiency of oxygen evolution processes depends greatly on the availability of cost‐effective catalysts with high activity and selectivity.In recent years,extensive theoretical and experimental studies have demonstrated that cobalt(Co)‐based nanomaterials,especially low‐dimensional Co‐based nanomaterials with a huge specific surface area and abundant unsaturated active sites,have emerged as versatile electrocatalysts for oxygen evolution reactions,and thus,great progress has been made in the rational design and synthesis of Co‐based nanomaterials for electrocatalytic oxygen evolution reactions.Considering the remarkable progress in this area,in this timely review,we highlight the most recent developments in Co‐based nanomaterials relating to their dimensional control,defect regulation(conductivity),electronic structure regulation,and so forth.Furthermore,a brief conclusion about recent progress achieved in oxygen evolution on Co‐based nanomaterials,as well as an outlook on future research challenges,is given.

Active structures integrated with wireless sensor and actuator networks： a bio-inspired control framework

One of the main problems in controlling the shape of active structures （AS） is to determine the actuations that drive the structure from the current state to the target state. Model-based methods such as stochastic search require a known type of load and relatively long computational time, which limits the practical use of AS in civil engineering. Moreover, additive errors may be produced because of the discrepancy between analytic models and real structures. To overcome these limitations, this paper presents a compound system called WAS, which combines AS with a wireless sensor and actuator network （WSAN）. A bio-inspired control framework imitating the activity of the nervous systems of animals is proposed for WAS. A typical example is tested for verification. In the example, a triangular tensegrity prism that aims to maintain its original height is integrated with a WSAN that consists of a central controller, three actuators, and three sensors. The result demonstrates the feasibility of the proposed concept and control framework in cases of unknown loads that include different types, distributions, magnitudes, and directions. The proposed control framework can also act as a supplementary means to improve the efficiency and accuracy of control frameworks based on a common stochastic search.

Molecular characteristics and structure–activity relationships of food-derived bioactive peptides

Peptides are functional active fragments of proteins which can provide nutrients needed for human growth and development,and they also have unique physiological activity characteristics relative to proteins.Bioactive peptides contain a great deal of development potential.More specifically,food-derived bioactive peptides have the advantages of a wide variety of sources,unique structures,high efficiency and safety,so they have broad development prospects.This review provides an overview of the current advances regarding the preparation,functional characteristics,and structure–activity relationships of food-derived bioactive peptides.Moreover,the prospects for the future development and application of food-derived bioactive peptides are discussed.This review may provide a better understanding of foodderived bioactive peptides,and some constructive inspirations for further research and applications in the food industry.

CONSTRUCTION OF POLYNOMIAL MATRIX USING BLOCK COEFFICIENT MATRIX REPRESENTATION AUTO-REGRESSIVE MOVING AVERAGE MODEL FOR ACTIVELY CONTROLLED STRUCTURES

The polynomial matrix using the block coefficient matrix representation auto-regressive moving average(referred to as the PM-ARMA)model is constructed in this paper for actively controlled multi-degree-of-freedom(MDOF)structures with time-delay through equivalently transforming the preliminary state space realization into the new state space realization.The PM-ARMA model is a more general formulation with respect to the polynomial using the coefficient representation auto-regressive moving average(ARMA)model due to its capability to cope with actively controlled structures with any given structural degrees of freedom and any chosen number of sensors and actuators.(The sensors and actuators are required to maintain the identical number.)under any dimensional stationary stochastic excitation.

Tuning Active Metal Atomic Spacing by Filling of Light Atoms and Resulting Reversed Hydrogen Adsorption-Distance Relationship for Efficient Catalysis

Precisely tuning the spacing of the active centers on the atomic scale is of great significance to improve the catalytic activity and deepen the understanding of the catalytic mechanism,but still remains a challenge.Here,we develop a strategy to dilute catalytically active metal interatomic spacing(d_(M-M))with light atoms and discover the unusual adsorption patterns.For example,by elevating the content of boron as interstitial atoms,the atomic spacing of osmium(d_(Os-Os))gradually increases from 2.73 to 2.96?.More importantly,we find that,with the increase in dOs-Os,the hydrogen adsorption-distance relationship is reversed via downshifting d-band states,which breaks the traditional cognition,thereby optimizing the H adsorption and H_2O dissociation on the electrode surface during the catalytic process;this finally leads to a nearly linear increase in hydrogen evolution reaction activity.Namely,the maximum dOs-Os of 2.96?presents the optimal HER activity(8 mV@10 mA cm^(-2))in alkaline media as well as suppressed O adsorption and thus promoted stability.It is believed that this novel atomic-level distance modulation strategy of catalytic sites and the reversed hydrogen adsorption-distance relationship can shew new insights for optimal design of highly efficient catalysts.

THE STRUCTURE OF ACTIVE SITE AND THE ROLE OF BIVALENT CATION IN FERRITE-FERRIC OXIDE CATALYSTS FOR OXIDATIVE DEHYDROGENATION OF BUTENES

The relations between catalytic activities and compositions of the systems Mg_xZn_(1-x)Fe_2O_4, Co_xZn_(1-x)Fe_2O_4, Co_xMg_(1-x)Fe_2O_4, Cd_xZn_(1-x)Fe_2O_4 and Mg_xZn_(1-x)Fe_2O_4·0.17Fe_2O_3 have been studied by flow differential reactor, XRD, and derivative IR techniques. It has been found that the appropriate normal-inverse spinel combination substantially increases the activity for the title raction. The structure of the active site and the role of the bivalent cation in the title catalyst have been inferred.

EFFECT OF STRUCTURE OF FUNCTIONAL POLYMER ACTIVE MATERIALS ON PROPERTIES OF GADOLINIUM ION SELECTIVE ELECTRODE

In this paper,the functional polymeric active materials were prepared by the grafting copolymerization and their structure and properties were studied.The results show that the structure and properties of these ac- tive materials have the relative large effects on the properties of gadolinium ion selective electrodes.

Effect of the structure of ginsenosides on the in vivo fate of their liposomes

To utilize themultiple functions and give full play of ginsenosides,a variety of ginsenosides with different structures were prepared into liposomes and evaluated for their effect on the stability,pharmacokinetics and tumor targeting capability of liposomes.The results showed that the position and number of glycosyl groups of ginsenosides have significant effect on the in vitro and in vivo properties of their liposomes.The pharmacokinetics of ginsenosides liposomes indicated that the C-3 sugar group of ginsenosides is beneficial to their liposomes for longer circulation in vivo.The C-3 and C-6 glycosyls can enhance the uptake of their liposomes by 4T1 cells,and the glycosyls at C-3 position can enhance the tumor active targeting ability significantly,based on the specific binding capacity to Glut 1 expressed on the surface of 4T1 cells.According to the results in the study,ginsenoside Rg3 and ginsenoside Rh2 are potential for exploiting novel liposomes because of their cholesterol substitution,long blood circulation and tumor targeting capabilities.The results provide a theoretical basis for further development of ginsenoside based liposome delivery systems.

Active Control of Structurally Radiated Sound from an Elastic Cylindrical Shell

A numerical and experimental study was presented on active control of structurally radiated sound from an elastic cylindrical shell.An analytical model was developed for the active structural acoustic control (ASAC) of the cylindrical shell.Both global and local control strategies were considered.The optimal control forces corresponding to each control strategy were obtained by using the linear quadratic optimal control theory.Numerical simulations were performed to examine and analyze the control performance under different control strategies.The results show that global sound attenuation of the cylindrical shell at resonance frequencies can be achieved by using point force as the control input of the ASAC system.Better control performance can be obtained under the control strategy of minimization of the radiated sound power.However,control spillover may occur at off-resonance frequencies with the control strategy of structural kinetic energy minimization in terms of the radiated sound power.Considerable levels of global sound attenuation can also be achieved in the on-resonance cases with the local control strategy,i.e.,minimization of the mean-square velocity of finite discrete locations.An ASAC experiment using an FXLMS algorithm was implemented,agreement was observed between the numerical and experimental results,and successful attenuation of structural vibration and radiated sound was achieved.

The Crustal Structure and Seismic Activity in North China

A layered crustal block model of North China has been constructed based on large amount of data from seismic sounding carried out in recent two decades. Some deep fault zones, such as the Zhangjiakou.Penglai and Tancheng-Lujiang fault zones, divide the upper crust of North China into three upper crustal terranes and nine bolcks. There are distinct differences in velocity and depth distributions, which reflects Cenozoic block faulting in North China in the process of formation of the deep structure. The upper crust shows the features of transition in isostatic adjustment. The existence of a low-velocity layer in the middle crust is characteristic of the crustal structure in North China. There seems to be an increase of rheology of the rocks in the lower crust and a persistence of stable regional stress field. The patterns of the Moho on two sides of the Yanshan-Taihang Mountains are different. The relief of the Moho around Beijing, Shijiazhuang and Guangrao where the deep faults join together shows a quadrantal distribution in some degree. The dynamic sources for seismic activity are the NE-SW horizontal compression and the diapirism of the upper mantle. The middle and upper crust, especially the layered block structure has the most significant effects on seismicity, and the occurrence of earthquakes is more closely related to them than to the Moho.

Synthesis,Crystal Structure and Antifungal Activity of 8-Chloro-3-((4-chlorobenzyl)-thio)[1,2,4]triazolo[4,3-a]pyridine

The title compound 8-chloro-3-（（4-chlorobenzyl）thio）-[1,2,4]triazolo[4,3-a]pyridine was prepared from 1-chloro-4-（chloromethyl）benzene and 8-chloro-[1,2,4]triazolo[4,3-a]pyridine-3（2H）-thione in the presence of Na OH, and its structure was determined by X-ray diffraction analysis. The crystal is of triclinic system, space group P1 with a = 6.8264（6）, b = 7.5890（4）, c = 13.0960（7） A, α = 93.447（4）, β = 98.772（6）, γ = 92.615（6）o, V = 668.26（8） A3, Z = 2, the final R = 0.035 and wR = 0.09 for 2259 observed reflections with I 〉 2σ（I）. The preliminary biological test showed that the title compound has activities against Stemphylium lycopersici（Enjoji） Yamamoto, Fusarium oxysporum. sp. cucumebrium, and Botrytis cinerea with inhibitory to be 51.19%, 62.02% and 15.56%, respectively.

Synthesis,Crystal Structure,DFT Studies and Biological Activity of a Novel Schiff Base Containing Triazolo[4,3-a]pyridine Moiety

The novel Schiff base（E）-8-chloro-NA-（4-（dimethylamino）benzylidene）-[1,2,4]triazolo[4,3-a]pyridine-3-carbohydrazide was synthesized and characterized by ^1H NMR,MS,elemental analysis and X-ray diffraction.The compound crystallizes in the monoclinic space group P2_1/c with a = 7.091（2）,b = 10.750（3）,c = 21.380（6） A,β = 96.299（6）°,V = 1619.7（8） A^3,Z = 4 and R = 0.0351.Theoretical calculation of the title compound was carried out with the B3LYP/6-31 G basis set.The frontier orbital energy and atomic net charges were discussed.It is found that the experimental data show good agreement with the calculated values.And the compound exhibits good antifungal activity against Stemphylium lycopersici（Enjoji） Yamamoto.

Structure and Anti-HIV Activity of Betulinic Acid Analogues

Firstly discovered in 1980s, human immunodeficiency virus （HIV） continues to affect more and more people. However, there is no effective drug available for the therapy of HIV infection. Betulinic acid existing in various medicinal herbs and fruits exhibits multiple biological effects, especially its outstanding anti-HIV activity, which has drawn the attentions of many pharmacists. Among the derivatives of betulinic acid, some compounds exhibited inhibitory activities at the nanomolar concentration, and have entered phase II clinical trials. This paper summarizes the current investigations on the anti-HIV activity of betulinic acid analogues, and provides valuable data for subsequent researches.

Synthesis,Crystal Structure,DFT Studies and Antifungal Activity of 5-(4-Cyclopropyl-5-((3-fluorobenzyl)sulfonyl)-4H-1,2,4-triazol-3-yl)-4-methyl-1,2,3-thiadiazole

5-（4-Cyclopropyl-5-（（3-fluorobenzyl）sulfonyl）-4H-1,2,4-triazol-3-yl）-4-methyl-1,2,3-thiadiazole was synthesized and recrystallized from Et OH. The compound was characterized by ^1H NMR,MS,elemental analysis and X-ray diffraction. The structure-active relationship and the antifungal activity based on density functional theory calculation（DFT） and antifungal activities were investigated. The compound crystallizes in the monoclinic space group P121/n1 with a = 8.929（3）,b=12.715（4）,c=15.161（5） A°,β = 106.142（3）o,V = 1653.3（9） A°3,Z = 4 and R = 0.0393 for 3930 observed reflections with I 〉 2σ（I）. Theoretical calculation of the title compound was carried out with B3LYP/6-31G（d,p）. The full geometry optimization was carried out using the 6-31G（d,p） basis set.The frontier orbital energy and atomic net charges were discussed. The observed results of the compound have been compared with theoretical results and the experimental data show good agreement with the calculated values. The compound exhibits good antifungal activity.

Synthesis,Crystal Structure and Anti-fungal Activity of 2-(4-Chlorophenyl)-(1,3-dimethyl-2,3-dihydro-1H)-perimidine

The title compound 2-（4-chlorophenyl）-1,3-dimethyl-2,3-dihydro-1H-perimidine（C（19）H（17）ClN2） was synthesized and characterized by elemental analysis, ^1H NMR, HRMS and single-crystal X-ray diffraction. The crystal of the title compound belongs to orthorhombic system,space group Pnma with a = 11.385（2）, b = 12.170（2）, c = 11.210（2）A, V = 1553.2（5）A^3, Z = 4, Dc =1.321 g/cm^3, m（Mo-Ka） = 0.244 mm^-1, F（000） = 648, S = 1.309, R = 0.0400 and w R（I 〉 2s（I）） =0.1065. X-ray diffraction results showed that the molecular structure is highly symmetric and the new-formed N-heterocyclic ring is non-planar. In addition, the biological experiment showed that the title compound showed inhibitory activities against fungi with varied potencies.

Synthesis,Crystal Structure and Antifungal Activity of 2-((2-Fluorobenzyl)thio)-5-(pyridin-4-yl)-1,3,4-oxadiazole

The title compound 2-（（2-fluorobenzyl）thio）-5-（pyridin-4-yl）-1,3,4-oxadiazole（C_（14）H_（10）FN_3OS） was synthesized,and its structure was confirmed by ~1H NMR,MS,elemental analyses and X-ray diffraction. It crystallizes in the monoclinic system,space group P21/n with a = 11.541（16）,b = 8.226（12）,c = 13.683（19） ？,β = 94.872（17）o,V = 1294（3） ？~3,Z = 4 and R = 0.0648 for 2198 observed reflections with I 〉 2σ（I）. The preliminary biological test shows that the title compound has good activity against Pythium ultimum with inhibitory to be 100%.

Synthesis, Crystal Structure and Biological Evaluation of Acridine-1,2,3-triazole Derivatives

A series of acridine-1,2,3-triazole derivatives were designed, synthesized and characterized by NMR. 1-（2-methylacridinyl）-4-（4-methyl phenyl）-1,2,3-triazole（4f）, C_（23）H_（18）N_4, was structurally determined by single-crystal X-ray diffraction. It crystallizes in the triclinic system, space group P1 with a = 9.585（4）, b = 9.684（4）, c = 11.339（5） A, β = 88.250（7）o, V = 925.3（6）, Z = 2, D_c = 1.258 g/cm^3, F（000） = 368, μ = 0.077 mm^（-1）, the final R = 0.0808 and wR = 0.2218 for 3386 observed reflections（I 〉 2σ（I））. X-ray analysis indicates that the acridine ring is almost vertical to triazole ring with the dihedral angle nearly to be 75°. The crystal packing of the compound is stabilized mainly by π-π interaction. The preliminary biological tests display that some of the title compounds possess a good anti-tumour activity against MGC-803 and T24.

Syntheses,Crystal Structures and Antibacterial Evaluation of Two New Pleuromutilin Derivatives

Two new pleuromutilin derivatives, 14-O-[（4-amino-6-methoxyl-pyrimidine-2-yl）-thioacetyl] mutilin（4） and 14-O-[4-amino-1-methyl-6-oxo-1,6-dihydropyrimidin-2-yl）thioacetyl] mutilin（5）, were synthesized and structurally characterized by IR, NMR spectra, HRMS and single-crystal X-ray diffraction. These compounds contain a 5-6-8 tricyclic carbon skeleton and a pyrimidine ring. Compound 4 is in the monoclinic system, space group P1211 with a = 10.2517（4）, b = 12.5655（4）, c = 10.3435（4）A, V = 1315.69（8） A^3, Z = 2, Dc = 1.309 g/cm3, F（000） = 558, μ = 0.166 mm^-1, S = 1.047, R = 0.0457 and w R = 0.0934 for 4721 unique reflections（R（int） = 0.0322） with I 〉 2σ（I）. Compound 5 belongs to the orthorhombic system, space group P212121 with a = 7.3667（4）, b = 13.9990（7）, c = 29.0434（13） A, V = 2995.1（2） A^3, Z = 4, Dc = 1.250 g/cm^3, F（000） = 1216, μ = 0.153 mm^-1, S = 1.031, R = 0.0545 and wR = 0.0982 for 5242 unique reflections（R（int） = 0.0476） with I 〉 2σ（I））. The in vitro antibacterial activity study showed the title compounds 4 and 5 displayed slightly less activity against methicillin-resistant Staphylococcus aureus（MRSA） and methicillin-resistant Staphylococcus epidermidis（MRSE）, and lower potent against Escherichia coli（E.coli） and Bacillus subtilis（B.subtilis） when compared to those of tiamulin fumarate.