Adsorption and desorption of gold on the magnetic activated carbon (MAC) were investigated The adsorption rate of gold is higher than that of conventional coconut carbon in cyanide leach solution The loading gold can ...Adsorption and desorption of gold on the magnetic activated carbon (MAC) were investigated The adsorption rate of gold is higher than that of conventional coconut carbon in cyanide leach solution The loading gold can be easily desorbed as coconut carbon. Crushed fine magnetic carbon can be selected by a magnetic separator, It is suggested that the MAC can be used in carbon-in-pulp (CIP)process for increasing the recovery rate of gold展开更多
This work was undertaken to investigate the behaviors and kinetics of toluene adsorption and desorption on activated carbons with varying pore structure. Five kinds of activated carbon from different raw materials wer...This work was undertaken to investigate the behaviors and kinetics of toluene adsorption and desorption on activated carbons with varying pore structure. Five kinds of activated carbon from different raw materials were selected. Adsorption isotherms and breakthrough curves for toluene were measured. Langmuir and Freundlich equations were fitted to the equilibrium data, and the Freundlich equation was more suitable for simulating toluene adsorption. The process consisted of monolayer, multilayer and partial active site adsorption types. The effect of the pore structure of the activated carbons on toluene adsorption capacity was investigated. The quasi-first-order model was more suitable for describing the process than the quasi-second-order model. The adsorption data was also modeled by the internal particle diffusion model and it was found that the adsorption process could be divided into three stages. In the external surface adsorption process, the rate depended on the specific surface area. During the particle diffusion stage, pore structure and volume were the main factors affecting adsorption rate. In the final equilibrium stage, the rate was determined by the ratio of meso-and macro-pores to total pore volume. The rate over the whole adsorption process was dominated by the toluene concentration. The desorption behavior of toluene on activated carbons was investigated,and the process was divided into heat and mass transfer parts corresponding to emission and diffusion mechanisms, respectively. Physical adsorption played the main role during the adsorption process.展开更多
Excess reactive phosphorus(PO4)in waterways can lead to eutrophication.A low-cost approach to reducing PO4 levels in surface water was evaluated using the alum-based water treatment residual(Al-WTR)or Al-WTR augmented...Excess reactive phosphorus(PO4)in waterways can lead to eutrophication.A low-cost approach to reducing PO4 levels in surface water was evaluated using the alum-based water treatment residual(Al-WTR)or Al-WTR augmented with powdered activated carbon(PAC-WTR).Batch adsorption-desorption and continuous flow column experiments were performed to assess the specific adsorption capacities under various concentration and flow conditions.Both Al-WTR and PAC-WTR exhibited the ability to adsorb PO4.The overall,cumulative sorbed amount after a 28-d desorption step for Al-WTR was 33.93 mg/kg,significantly greater than the PAC-WTR value of 24.95 mg/kg(p<0.05).The continuous flow column experiments showed a theoretical PO4 uptake of 9.00 mg/g for Al-WTR and 7.14 mg/g for PAC-WTR over 720 h.When surface water was used,the Al-WTR and PAC-WTR columns removed 67.4%and 62.1%of the PO4,respectively.These results indicated that Al-WTR was more effective for in-field evaluation.展开更多
文摘Adsorption and desorption of gold on the magnetic activated carbon (MAC) were investigated The adsorption rate of gold is higher than that of conventional coconut carbon in cyanide leach solution The loading gold can be easily desorbed as coconut carbon. Crushed fine magnetic carbon can be selected by a magnetic separator, It is suggested that the MAC can be used in carbon-in-pulp (CIP)process for increasing the recovery rate of gold
基金supported by the Program for New Century Excellent Talents in University(NCET-12-0776)the National Natural Science Foundation of China(21507004)the Fundamental Research Funds for the Central Universities(FRF-TP-15-046A1)
文摘This work was undertaken to investigate the behaviors and kinetics of toluene adsorption and desorption on activated carbons with varying pore structure. Five kinds of activated carbon from different raw materials were selected. Adsorption isotherms and breakthrough curves for toluene were measured. Langmuir and Freundlich equations were fitted to the equilibrium data, and the Freundlich equation was more suitable for simulating toluene adsorption. The process consisted of monolayer, multilayer and partial active site adsorption types. The effect of the pore structure of the activated carbons on toluene adsorption capacity was investigated. The quasi-first-order model was more suitable for describing the process than the quasi-second-order model. The adsorption data was also modeled by the internal particle diffusion model and it was found that the adsorption process could be divided into three stages. In the external surface adsorption process, the rate depended on the specific surface area. During the particle diffusion stage, pore structure and volume were the main factors affecting adsorption rate. In the final equilibrium stage, the rate was determined by the ratio of meso-and macro-pores to total pore volume. The rate over the whole adsorption process was dominated by the toluene concentration. The desorption behavior of toluene on activated carbons was investigated,and the process was divided into heat and mass transfer parts corresponding to emission and diffusion mechanisms, respectively. Physical adsorption played the main role during the adsorption process.
基金This work was supported by Ohio EPA 319(Grant No.17(H)EPA-17)and the Ohio Water Development Authority(Grant No.80-17).
文摘Excess reactive phosphorus(PO4)in waterways can lead to eutrophication.A low-cost approach to reducing PO4 levels in surface water was evaluated using the alum-based water treatment residual(Al-WTR)or Al-WTR augmented with powdered activated carbon(PAC-WTR).Batch adsorption-desorption and continuous flow column experiments were performed to assess the specific adsorption capacities under various concentration and flow conditions.Both Al-WTR and PAC-WTR exhibited the ability to adsorb PO4.The overall,cumulative sorbed amount after a 28-d desorption step for Al-WTR was 33.93 mg/kg,significantly greater than the PAC-WTR value of 24.95 mg/kg(p<0.05).The continuous flow column experiments showed a theoretical PO4 uptake of 9.00 mg/g for Al-WTR and 7.14 mg/g for PAC-WTR over 720 h.When surface water was used,the Al-WTR and PAC-WTR columns removed 67.4%and 62.1%of the PO4,respectively.These results indicated that Al-WTR was more effective for in-field evaluation.
