期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
基于有源电感的全集成超宽带低噪声放大器 被引量:6
1
作者 郭振杰 张万荣 +5 位作者 金冬月 谢红云 丁春宝 邢光辉 路志义 张瑜洁 《微电子学》 CAS CSCD 北大核心 2013年第3期316-320,共5页
利用有源电感来实现超宽带低噪声放大器(UWB LNA),不但可以减小芯片面积、改善增益平坦度,而且可通过外部调节偏置电压来调谐有源电感的电感值,进而调整设计中没有考虑到的由工艺变化及封装寄生带来的增益退化。采用TSMC 0.35μm SiGe B... 利用有源电感来实现超宽带低噪声放大器(UWB LNA),不但可以减小芯片面积、改善增益平坦度,而且可通过外部调节偏置电压来调谐有源电感的电感值,进而调整设计中没有考虑到的由工艺变化及封装寄生带来的增益退化。采用TSMC 0.35μm SiGe BiCMOS工艺,利用Cadence设计工具完成了放大器电路及版图的设计。在3.1~10.6GHz工作频率范围内,通过外部调节电压来调谐有源电感,可使LNA的增益S21在16~19dB范围内变化,输入输出回波损耗S11,S22均小于-10dB,噪声为2.4~3.7dB,输入3阶截点IIP3为-4dBm。整个电路芯片面积仅为0.11mm2。 展开更多
关键词 有源电感 超宽带 低噪声放大器 增益平坦度
下载PDF
Design of Low Power CMOS LNA with Current-Reused and Notch Filter Topology for DS-UWB Application
2
作者 Meng-Ting Hsu Jhih-Huei Du Wen-Chen Chiu 《Wireless Engineering and Technology》 2012年第3期167-174,共8页
This paper presents the design of a low power LNA with second stage that uses a notch filter for DS-UWB application. The LNA employs a current reuse structure to reduce the power consumption and an active second order... This paper presents the design of a low power LNA with second stage that uses a notch filter for DS-UWB application. The LNA employs a current reuse structure to reduce the power consumption and an active second order notch filter to produce band rejection in the 5 - 6 GHz frequency band. The input reflection coefficient S11 and output reflection S22 are both less than –10 dB. The maximum power gain S21 is 15 dB while the maximum rejection ratio is over –10 dB at 4.8 GHz. The minimum noise figure is 5 dB. The input referred third-order intercept point (IIP3) is –7 dBm at 6 GHz. The power consumption is 6.4 mW from a 1-V power supply. 展开更多
关键词 LOW Noise Amplifier (LNA) LOW Power LOW Voltage ultra-wideband (UWB) active NOTCH Filter
下载PDF
MIMO Antenna for UWB Communications
3
作者 Joseph Jervase-Yak Ali Hamed Al-Shamsi 《International Journal of Communications, Network and System Sciences》 2016年第5期177-183,共7页
Design of ultra-wideband antennas is challenging in the stringent requirements that are often conflicting to achieve a wide impedance bandwidth while maintaining high radiation efficiency, uniform gain and compact siz... Design of ultra-wideband antennas is challenging in the stringent requirements that are often conflicting to achieve a wide impedance bandwidth while maintaining high radiation efficiency, uniform gain and compact size. A Multiple-Input Multiple-Output (MIMO) antenna system can enhance the overall antenna performance but at having to overcome new challenges such as reducing the mutual coupling and the correlation between the elements. A printed circular disc compact planar antenna is selected in this work due to its UWB performance and compact size for the MIMO antenna system. A parametric analysis is carried out to achieve an optimal design. The system developed consists of two elements with an overall size of 59 × 27 mm. The designed antenna system operates over the whole of the UWB bandwidth from 3.1 to 10.6 GHz with radiation efficiency up to 85% and reflection coefficients less that ?10 dB. The envelope correlation is less than ?60 dB throughout the UWB band while the diversity gain approaches 10 throughout the entire UWB bandwidth and Total Active Reflection Coefficient (TARC) between the antenna elements is less ?11 dB. Thus the proposed MIMO antenna outperforms similar antenna systems reported in the literature. 展开更多
关键词 Antenna Efficiency Diversity Gain MIMO Antenna Total active Reflection Coefficient (TARC) ultra-wideband (UWB) Antenna
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部