Vibration Suppression for Active Magnetic Bearings Using Adaptive Filter with Iterative Search Algorithm

Active Magnetic Bearing(AMB) is a kind of electromagnetic support that makes the rotor movement frictionless and can suppress rotor vibration by controlling the magnetic force. The most common approach to restrain the rotor vibration in AMBs is to adopt a notch filter or adaptive filter in the AMB controller. However, these methods cannot obtain the precise amplitude and phase of the compensation current. Thus, they are not so effective in terms of suppressing the vibrations of the fundamental and other harmonic orders over the whole speed range. To improve the vibration suppression performance of AMBs,an adaptive filter based on Least Mean Square(LMS) is applied to extract the vibration signals from the rotor displacement signal. An Iterative Search Algorithm(ISA) is proposed in this paper to obtain the corresponding relationship between the compensation current and vibration signals. The ISA is responsible for searching the compensating amplitude and shifting phase online for the LMS filter, enabling the AMB controller to generate the corresponding compensation force for vibration suppression. The results of ISA are recorded to suppress vibration using the Look-Up Table(LUT) in variable speed range. Comprehensive simulations and experimental validations are carried out in fixed and variable speed range, and the results demonstrate that by employing the ISA, vibrations of the fundamental and other harmonic orders are suppressed effectively.

Unbalance Vibratory Displacement Compensation for Active Magnetic Bearings

As the dynamic stiffness of radial magnetic bearings is not big enough, when the rotor spins at high speed, unbalance displacement vibration phenomenon will be produced. The most effective way for reducing the displacement vibration is to enhance the radial magnetic bearing stiffness through increasing the control currents, but the suitable control currents are not easy to be provided, especially, to be provided in real time. To implement real time unbalance displacement vibration compensation, through analyzing active magnetic bearings （AMB） mathematical model, the existence of radial displacement runout is demonstrated. To restrain the runout, a new control scheme-adaptive iterative learning control （A1LC） is proposed in view of rotor frequency periodic uncertainties during the startup process. The previous error signal is added into AILC learning law to enhance the convergence speed, and an impacting factor/3 influenced by the rotor rotating frequency is introduced as learning output coefficient to improve the rotor control effects, As a feed-forward compensation controller, AILC can provide one tmknown and perfect compensatory signal to make the rotor rotate around its geometric axis through power amplifier and radial magnetic bearings. To improve AMB closed-loop control system robust stability, one kind of incomplete differential PID feedback controller is adopted. The correctness of the AILC algorithm is validated by the simulation of AMB mathematical model adding AILC compensation algorithm through MATLAB soft. And the compensation for fixed rotational frequency is implemented in the actual AMB system. The simulation and experiment results show that the compensation scheme based on AILC algorithm as feed-forward compensation and PID algorithm as close-loop control can realize AMB system displacement minimum compensation at one fixed frequency, and improve the stability of the control system. The proposed research provides a new adaptive iterative/earning control algorithm and control strategy for AMB displacement minimum compensation, and provides some references for time-varied displacement minimum compensation.

Real-time Feed-forward Force Compensation for Active Magnetic Bearings System Based on H∞ Controller

There are two kinds of unbalance vibrations—force vibration and displacement vibration due to the existence of unbalance excitation in active magnetic bearings（AMB） system. And two unbalance compensation methods—closed-loop feedback and open loop feed-forward are presented to reduce the force vibration. The transfer function order of the control system directly influencing the system stability will be increased when the closed-loop method is adopted, which makes the real-time compensation not easily achieved. While the open loop method would not increase the primary transfer function order, it provides conditions for real-time compensation. But the real-time compensation signals are not easy to be obtained in the open loop method. To implement real-time force compensation, a new method is proposed to reduce the force vibration caused by the rotor unbalance on the basis of AMB active control. The method realizes real-time and on-line force auto-compensation based on H∞ controller and one novel feed-forward compensation controller, which makes the rotor rotate around its inertia axis. The time-variable feed-forward compensatory signal is provided by a modified adaptive variable step-size least mean square（VSLMS） algorithm. And the relevant least mean square（LMS） algorithm parameters are used to solve the H∞ controller weighting functions. The simulation of the new method to compensate some frequency-variable and sinusoidal signals is completed by MATLAB programming, and real-time compensation is implemented in the actual AMB experimental system. The simulation and experiment results show that the compensation scheme can improve the robust stability and the anti-interference ability of the whole AMB system by using H∞ controller to achieve close-loop control, and then real-time force unbalance compensation is implemented. The proposed research provides a new control strategy containing real-time algorithm and H∞ controller for the force compensation of AMB system. And the stability of the control system is finally improved.

TRANSIENT RESPONSE OF FLEXIBLE ROTOR WITH ACTIVE MAGNETIC BEARINGS DURING ROTOR DROP

A new technique so-called finite modes condensation based on modal analysis is presented to simplify a long and complicated rotor system with distributed mass into a simplified rotor model with adjustablenumber of degrees of freedom. By means of this new method, a practical example study shows that it can bedone to calculate transient response for any cross-section of a flexible rotor with enough accuracy during itsdrop in case that there exist several active magnetic bearings and traditional bearings.

COMPENSATION CONTROL OF REAL-TIME UNBALANCE FORCE FOR ACTIVE MAGNETIC BEARING SYSTEM

Aiming at the stability and others properties of active magnetic bearing （AMB） system influenced by the periodic unbalance stimulation synchronous with rotor rotational speed, a new real-time adaptive feed-forward unbalance force compensation scheme is proposed based on variable step-size least mean square（LMS） algorithm as the feed-forward compensation controller. The controller can provide some suitable sinusoidal signals to com- pensate the feedback unbalance response signals synchronous with the rotary frequency, then reduce the fluctua- tion of the control currents and weaken the active control of AMB system. The variable step-size proportional to the rotational frequency is deduced by analyzing the principle of normal LMS algorithm and its deficiency in the application of real-time filtering of AMB system. Experimental results show that the new method can implement real-time unbalance force compensation in a wide frequency band, reduce the effect of unbalance stimulant force on the housing of AMB system, and provide convenience to improve rotational speed.

RESEARCH ON CONTROL OF FLYWHEEL SUSPENDED BY ACTIVE MAGNETIC BEARING SYSTEM WITH SIGNIFICANT GYROSCOPIC EFFECTS

Traditional PID controllers are no longer suitable formagnetic-bearing-supported high-speed flywheels with significant gyroscopic effects. Becausegyroscopic effects greatly influence the stability of the flywheel rotor, especially at highrotational speeds. Velocity cross feedback and displacement cross feedback are used to overcomeharmful effects of nutation and precession modes, and stabilize the rotor at high rotational speeds.Theoretical analysis is given to show their effects. A control platform based on RTLinut and a PCis built to control the active magnetic bearing (AMB) system, and relevant results are reported.Using velocity cross feedback and displacement cross feedback in a closed loop control system, theflywheel successfully runs at over 20000 r/min.

Analysis on Dynamic Performance for Active Magnetic Bearing-Rotor System

In the application of active magnetic bearings (AMB), one of the key problems to be solved is the safety and stability in the sense of rotor dynamics. The project related to the present paper deals with the method for analyzing bearing rotor systems with high rotation speed and specially supported by active magnetic bearings, and studies its rotor dynamics performance, including calculation of the natural frequencies with their distribution characteristics, and the critical speeds of the system. One of the targets of this project is to formulate a theory and method valid for the analysis of the dynamic performance of the active magnetic bearing rotor system by combining the traditional theory and method of rotor dynamics with the analytical theory and design method based on modern control theory of the AMB system.

CONTROL SYSTEM OF MAGNETIC BEARINGS BASED ON LINEAR QUADRATIC METHOD OF OPTIMAL CONTROL STRATEGY

A state equation for radical 4-degree-of-freedom active magnetic bearings isbuilt, and the approach on how to use linear quadratic method of optical control theory to design acentralized and decentralized parameters control system is introduced, and also Matlab language isused to simulate and analyze. The simulation results have proved that the differences are smallbetween centralized parameters and decentralized parameters control system. The conclusions ofexperiments have shown that decentralized controllers designed from optimal state feedback theorymeet the requirements of active magnetic bearing system. The vibration amplitude of the rotor isabout 20 mu m when the speed of the rotor runs between 0 to 60 000 r/min. This method may be used inthe study and design of controllers of magnetic bearings.

Experimental Investigation on Vibration Control of Rotor-bearing System with Active Magnetic Exciter

Vibration control is an efficient way to minimize a rotating machine’s vibration level so that its vibration fault-free can be realized.While,several factors,such as unbalance,misalignment and instability,contribute to the serious vibration of rotating machines.It is necessary that one apparatus can depress vibration caused by two or more reasons.The fault self-recovery(FSR) mechanism is introduced and investigated.Strategies of vibration control are investigated theoretically using numerical method firstly.Active magneticelectric exciter(AME) are selected as the actuator of a FSR device because it can provide suitable force by varying the control current in the exciters depending upon a proportional and derivative control law.By numerical study,it is indicate that only a small control force is needed to improve stability margins of the compressor and prevent subsynchronous vibration fault efficiently.About synchronous vibration,three control strategies,searching in whole circle,fast optimizing control(FOC),and none mistaking control,are investigated to show which of the control strategy can realize the fault self-recovery in the shortest time.Experimental study is conducted on a test rig with variable rotating speed.Results of the test indicate that the non-mistake control strategy can minimize synchronous vibration in less than three seconds.The proposed research can provide a new insight for subsynchronous and synchronous vibration restraining about centrifugal compressor.

Experimental Study of Active Magnetic Bearing on a 150 M^(3)Turbo Oxygen Gas Expander

This paper is concerned with the investigation, experiment and design analyses on the application of active magnetic bearings for a 150M 3 turbo oxygen gas expander having 1.16 kg weight and 30 mm diameter rotor, which was supported by two aerostatic bearings formerly. Now, the machine can work steady at a rotation speed of 92,000 r/min, and can be run up to a maximum rotation speed of 104,000 r/min.

Variable Parameters PD Control and Stability of a High Rate Rigid Rotor-Journal Active Magnetic Bearing System

Stability is a key problem that means whether a high rate rotor-active magnetic bearings system works reliably or not. Aiming at a bearings system described with nonlinear equations, this paper built a linear model according to the system behavior. Considering realization of the control system and behavior of a high rate rotor system (magnetic force is far smaller than input force produced by mass eccentricity) this paper proposes a design method of variable parameters PD control algorithm that can be used universally. The control system was simplified and a mass of adjusting work of control parameters was reduced. Analysis and simulation indicated that the bearings system could get a wider stable region of harmonic motion, and proved that the algorithm is robust and advanced. The control system can be realized because the winding electric currents are positive. The method is convenient for operation and can easily be used for engineering practice.

Improving Kinetic Energy Storage for Vehicles through the Combination of Rolling Element and Active Magnetic Bearing

The demand for short term energy storage providing high power for electric and hybrid-electric vehicles is increasing drastically. Stationary FESS （flywheel energy storage systems） is established as UPS （uninterruptible power supply） and represent an emerging market. In contrast, mobile FESSs are currently only used in a few application, e.g., in motor sports. To enable a wider use in personal and public transportation the life-span of the flywheel＇s bearings needs to be increased significantly. This paper presents an alternative approach to extend the lifespan of the flywheel＇s bearings significantly by using a CREAMB （combination of rolling element and active magnetic bearings）.

Model Development and Adaptive Imbalance Vibration Control of Magnetic Suspended System

A system model is developed to describe the translational and rotational motion of an active-magnetic-bearing-suspended rigid rotor in a single-gimbal control moment gyro onboard a rigid satellite. This model strictly reflects the motion characteristics of the rotor by considering the dynamic and static imbalance as well as the coupling between the gimbal＇s and the rotor＇s motion on a satellite platform. Adaptive auto-centering control is carefully constructed for the rotor with unknown dynamic and static imbalance. The rotor makes its rotation about the principal axis of inertia through identifying the small rotational angles between the geometric axis and the principal axis as well as the displacements from the geometric center to the mass center so as to tune a stabilizing controller composed of a decentralized PD controller with cross-axis proportional gains and high- and low-pass filters. The main disturbance in the wheel spinning can thereby be completely removed and the vibration acting on the satellite attenuated.

UNBALANCE RESPONSE AND TOUCH-RUBBING THRESHOLD SPEED OF ROTOR SUBJECTED TO NONLINEAR MAGNETIC FORCES

Because of the effect of unbalance excitation and nonlinear magnetic force, the large vibration of the rotor supported by active magnetic bearing（AMB） will go beyond the radial gap of the bearing, even causing mechanical touch-rubbing when the system works at an operational speed closer to the critical speed. In order to investigate this problem, the linear model and nonlinear model of the single mass symmetric rigid rotor system supported by AMB are established respectively and the corresponding transfer functions of close-loop system are given. To pass through the numerical calculation by using MATLAB/Simulink, the effect of both the unbalance response and threshold speed of touch-rubbing of the system subjected to nonlinear magnetic forces and nonlinear output current of power amplifier are studied. Furthermore, threshold speed of touch-rubbing of the rotor-bearing system is defined and the results of numerical simulation are presented. Finally, based on above studies, two methods of increasing the touch-rubbing threshold speed are discussed.

Synchronous Vibration Suppression of Magnetic Bearing Systems without Angular Sensors

Active Magnetic Bearing(AMB)levitates rotor by magnetic force without friction,and it can provide active control force to suppress vibration while rotating.Most of vibration suppressing methods need angular speed sensors to obtain rotating speed,but in many occasions,angular speed sensor is difficult to install or is difficult to guarantee reliability.This paper proposed a vibration suppressing strategy without angular speed sensor based on generalized integrator and frequency locked loop(GI-FLL)and phase shift generalized integrator(PSGI).GI-FLL and high-pass filter estimate frequency from control current,PSGI is applied to generate compensating signal.Firstly,model of AMB system expressed by transfer function is established and effect of centrifugal force is analyzed.Then,principle and process of vibration suppressing strategy is introduced.Influence of parameters are analyzed by root locus and bode diagram.Simulation results display the process of frequency estimation and performance of displacement.Experiments are carried on a test rig,results of simulations and experiments demonstrate the effectiveness of proposed vibration suppressing strategy.

Dynamic Stiffness Analysis and Experimental Verification of Axial Magnetic Bearing Based on Air Gap Flux Variation in Magnetically Suspended Molecular Pump

Current and displacement stiffness are important parameters of axial magnetic bearing(AMB)and are usually considered as constants for the control system.However,in actual dynamic work situations,time-varying force leads to time-varying currents and air gap with a specific frequency,which makes the stiffness of appear decrease and even worsens control performance for the whole system.In this paper,an AMB dynamic stiffness model considering the flux variation across the air gap due to frequency is established to obtain the accurate dynamic stiffness.The dynamic stiffness characteristics are analyzed by means of the dynamic equivalent magnetic circuit method.The analytical results show that the amplitude of current and displacement stiffness decreases with frequency increasing.Moreover,compared with the stiffness model without considering the variation of flux density across the air gap,the improved dynamic stiffness results are closer to the actual results.Through the dynamic stiffness measurement method of AMB,experiments of AMB in magnetically suspended molecular pump(MSMP)are carried out and the experimental results are consistent with theoretical analysis results.This paper proposes the dynamic stiffness model of axial magnetic bearing considering the variation of flux density across the air gap,which improves the accuracy of the AMB stiffness analysis.

STUDY ON CATASTROPHIC MECHANISM FOR ROTOR DROP TRANSIENT VIBRATION FOLLOWING MAGNETIC BEARING FAILURE

The nonlinear and transient vibration of a rotor, which dropped onto back-up bearings when its active magnetic bearings were out of order, was investigated. After strictly deriving its equations of motion and performing numerical simulations, the time-histories of rotating speed of the dropping rotor, and normal force at the rubbing contact point as well as the frequency spectrum of the vibration displacement of back-up bearings are fully analyzed. It is found that the strong and unsteady forced bending vibration of the unbalanced and, damped rotor decelerating through : its first. bending vibtation of the unbalanced and, damped rotor decelerating through its,first critical speed as well as chattering at high frequencies caused by the nonlinearity at the rubbing contact point between, the journal and back-up bearings may lead to the catastrophic damage. of the system.

主动磁悬浮轴承系统保护轴承热特性研究及减摩设计

针对主动磁悬浮轴承系统(AMBs)转子跌落过程中转子与保护轴承碰摩产生巨大冲击、振动和大量摩擦热,易使保护轴承失效的问题,对立式转子跌落到保护轴承过程中的热特性进行了研究,分析了转子跌落对保护轴承造成破坏的主要影响因素,进而提出了一种采用磁控溅射技术在保护轴承关键表面沉积固体润滑薄膜(类石墨碳基薄膜,GLC)的减摩方法,并对镀膜、未镀膜的保护轴承进行了转子跌落试验。研究结果表明:跌落转速为20000 r/min时,保护轴承的最高温度为210.60℃,出现在转子与轴承内圈端面高速碰摩阶段,该温度超过了轴承钢160℃的回火温度,导致轴承烧伤而失效。在跌落试验中,镀有GLC薄膜的自润滑保护轴承试验后的沟道和端面外观明显优于未镀膜保护轴承,由碰摩发热导致的内圈端面硬度下降也较轻,质心轨迹和轴向位移更加平稳,温升更低,GLC薄膜起到了关键的自润滑和减摩功能,提高了保护轴承的使用寿命和服役可靠性,为解决主动磁悬浮轴承系统中保护轴承易失效而发生重大事故的问题提供了一种思路和方法。

基于粒子群算法的分数阶PID主动磁轴承控制

针对主动磁轴承(AMB)四自由度间强耦合、非线性导致控制器控制效果不佳的问题,将分数阶PID(FOPID)控制器引入AMB控制系统,提出了基于粒子群(PSO)算法的FOPID控制器以提高控制器的响应速度并抑制转轴位移超调量,提高控制精度。采用时间乘以误差绝对值积分(ITAE)作为性能指标,在限制电流模块不同幅值条件下,将FOPID控制器与PID控制器进行比较。仿真结果显示,PSO算法可以简化FOPID控制器参数的调节过程;随着限制电流的提升,FOPID控制器的控制效果明显优于PID控制器,在5 A输入电流的限制下其性能指标高出PID控制器约1.05%;随限制电流幅值增加,在60 A输入电流的限制下性能指标可高出PID控制器约26.25%。

主动磁轴承系统建模与准谐振自抗扰振动抑制

为了建立更准确的磁轴承数学模型,优化其控制性能,对磁轴承的电磁力非线性特性和系统固有干扰源进行了分析,通过转子动力学分析建立了含干扰源的主动磁轴承径向耦合系统模型。为抑制系统的振动,提出了一种磁轴承准谐振自抗扰振动抑制方法。通过扩张状态观测器实现系统解耦,简化控制流程,提升系统抗干扰能力;在此基础上,并入准谐振控制器对正弦周期性振动进行抑制。与传统方法相比,该方法控制结构简单,所需整定参数较少。仿真与试验结果表明,所提方法可以有效降低转子位移振动幅值,系统内常见的1、3、5倍频周期性振动得到显著抑制,具有良好的振动抑制效果。